• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.13-18
• /
• 2016

Humidifiers are used to control indoor humidity. Element-type humidifiers have the advantages of simple structure and low energy consumption, and Japanese products have been widely used for the humidifying elements. In this study, a new humidifying element made of cellulose and PET was developed, and the performance was compared with that of a Japanese element. The mass transfer rates and pressure drops were measured for an element installed at the entrance of a suction-type wind tunnel. The humidification efficiency of the new element was 2 to 4% greater and the pressure drop was 23 to 32% smaller compared to the Japanese element. The mass transfer effectiveness ($j_m/f$) of the new element is also 5 to 28% higher. However, the water absorption capacity was smaller than that of the Japanese element, meaning further development is needed.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.346-351
• /
• 2014

With the world population's continuous growth and urban industrialization, capacitive deionization (CDI) has been proposed as a next-generation water treatment technology to augment the supply of water. As a future water treatment method, CDI attracts significant attention because it offers small energy consumption and low environmental impact in comparison to conventional methods. Carbon electrodes, which have large surface area and high conductivity, are mainly used as electrode materials of choice for the removal of ions in water. A variety of carbon materials have been investigated, including their adsorption-desorption behavior in accordance to the specific surface area and pore size distribution. In this review, we analyzed and highlighted these carbon materials and looked at the impact of pore size distribution to the overall CDI efficiency. Finally, we propose an optimal condition in the interplay between micropores and mesopores in order to provide the best electrosorption property for these carbon electrodes.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.513-520
• /
• 2017

The application possibility of an alternative new method with low energy consumption was studied for the eco-friendly fabrication of foamed glasses from waste glasses. As a result, fabricating temperature can be reduced under $300^{\circ}C$ without using various expensive inorganic oxidants. The foamed glass can be fabricated at a proper mixing ratio of the waste glass powder, water glass, little surfactant and bubble stabilizer by induction heating method. In the experimental range, the assured optimal condition is 4 min heating on the induction machine with a steel-container ($100mm{\times}100mm{\times}20mm$) and followed by evaporating and drying process for 11 min with 110 g of glass powder, 80 g of water glass, 3 g of surfactant and 0.2 g of bubble stabilizer. When the foamed glass was fabricated at the optimal condition, the density of the glass was $0.85g/cm^3$ and the heat conduction was $0.052W/h{\cdot}K$. In addition, the compressive strength of the glass was above $50kg/cm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.338-346
• /
• 2016

Wearable Device has various constraint about battery power consumption, size, weight, etc, because the devices is worn and operated by person and provide services. So, if a device includes too many functions, it dose not satisfies the constraint and lose price competitiveness due to become expensive. Therefore we suggest that make reassembly Unit Modular Device witch has common used functions in wearable devices and user can receive various services to reassemble Unit Modules. It is comprised of frames and modules. Each module has various functions. Each frames help module to communicate each modules. To realize this device, we design to guarantee each services to use necessary modules, to give priority to modules depending on the important of the task, to set that does not use to low energy mode.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.277-286
• /
• 2007

The technology of seawater desalination has been received much attentions to solve the problem of water shortage through all over the world. In this study, it attempts to confirm the use-possibility of cellulose triacetate (CTA) for preparation of reverse osmosis membranes which have been highlighted as high efficiency and low energy consumption process for seawater desalination. The effects of casting dope parameters like an acetyl content, solvent, additives on the membrane performance were investigated. It was possible to produce the membranes which have high water flow rate and salt rejection with the increase of acetyl content and dioxane content among various dioxane/acetone ratios. Acetic acid and maleic acid were preferred for additives to produce high performance membranes. It was verified that $HOLLOSEP^{(R)}$ module which is commercialized CTA membrane by TOYOBO Co. can produce stable water production and high-quality water for long-term operation in the practice plants without any chemical treatments.

• The Korean Journal of Physiology and Pharmacology
• /
• v.15 no.3
• /
• pp.171-177
• /
• 2011

Tonic smooth muscle exhibit the latch phenomenon: high force at low myosin regulatory light chains (MRLC) phosphorylation, shortening velocity (Vo), and energy consumption. However, the kinetics of MRLC phosphorylation and cellular activation in phasic smooth muscle are unknown. The present study was to determine whether $Ca^{2+}$-stimulated MRLC phosphorylation could suffice to explain the agonist- or high $K^+$-induced contraction in a fast, phasic smooth muscle. We measured myoplasmic [$Ca^{2+}$], MRLC phosphorylation, half-time after step-shortening (a measure of Vo) and contractile stress in rabbit urinary bladder strips. High $K^+$-induced contractions were phasic at both $22^{\circ}C$ and $37^{\circ}C$: myoplasmic [$Ca^{2+}$], MRLC phosphorylation, 1/half-time, and contractile stress increased transiently and then all decreased to intermediate values. Carbachol (CCh)-induced contractions exhibited latch at $37^{\circ}C$: stress was maintained at high levels despite decreasing myoplasmic [$Ca^{2+}$], MRLC phosphorylation, and 1/half-time. At $22^{\circ}C$ CCh induced sustained elevations in all parameters. 1/half-time depended on both myoplasmic [$Ca^{2+}$] and MRLC phosphorylation. The steady-state dependence of stress on MRLC phosphorylation was very steep at $37^{\circ}C$ in the CCh- or $K^+$-depolarized tissue and reduced temperature flattend the dependence of stress on MRLC phosphorylation compared to $37^{\circ}C$. These data suggest that phasic smooth muscle also exhibits latch behavior and latch is less prominent at lower temperature.

• Journal of Adhesion and Interface
• /
• v.20 no.4
• /
• pp.140-145
• /
• 2019

In view of environmental considerations, the control of carbon dioxide (CO₂) and volatile organic compounds (VOCs) is one of important issues in the film and coating industries. Therefore, UV-curable system has been developed due to minimize emissions of VOCs and reduce CO₂ emission due to low energy consumption from fast curing. Also, biodegradable polymers economically are attractive because of environmental and economic concerns associated with huge waste plastics. In this study, UV-curable polyurethane acrylates with different compositions of biodegradable polylactide (PLA) diol and poly(ethylene glycol) as diols were synthesized and curing reaction of their end-capped acrylates was performed by UV exposure. Tensile strength, elongation, and Tg of the UV-cured polyurethane acrylates increased with PLA diol content in the diol while their hydrophilicity and thermal stability increased with the PEG content. These results indicated a property of UV-cured polyurethane acrylates could be controlled by environment-friendly diols.

• Particle and aerosol research
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2020

Nano-pulse plasma technology has great potential as the process simplicity, high efficiency and low energy consumption for SO₂ removal. The research on the gas-to-particle conversion is required to achieve higher efficiency of SO₂ gas removal. Thus, we studied the effect of the relative humidity, NH₃ concentration and applied voltage of the nano-pulse plasma system in the gas to particle conversion of SO₂. The particles from the conversions were increased from 10 to 100 nm in diameter as relative humidity, NH₃ concentration, applied voltage increases. With these results, nano-pulse plasma system can be used to more efficient removal of SO₂ gas by controlling above parameters.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.39-46
• /
• 2007

Recently flash memory is widely accepted as a storage devise of embedded systems for portability and performance reasons. Flash memory has many distinguishing features compared to legacy magnetic disks. Especially, a file system for flash memory usually assumes the form of log-structured file system and it employs garbage collector accordingly. Since the garbage collector can greatly affect the performance of file system, it should be designed carefully considering flash memory features. In this paper, we suggest a new garbage collector for existing JFFS2 (Journaling Flash File System II) file system. By extensive performance evaluation, we show that the proposed garbage collector achieves improved performance in terms of flash memory consumption rate, increased flash memory life time, and improved wear-leveling.

• Journal of Construction Engineering and Project Management
• /
• v.8 no.3
• /
• pp.1-23
• /
• 2018

Since the protection the of human being from natural disaster and atmospheric factors have become an essential requirement, some attempts have been taken place to provide shelter and create a safe environment to a more comfortable life with welfare. For this purpose, using existing resources in nature and exploiting them in a different manner have been taken into account. Initially, the performed exploitations for construction had the least damage to the environment, but over time and as a result of population growth, aggressive exploitation of nature has led to destroying effects on the environment and resulted in consequences such as pollution and environmental destruction. Thus, the construction industry has been identified as the top pollutant factors of the environment. Among various construction factors, the building materials used in this industry are considered as the most important effective factors on the environment, as they have direct influences on the environment from the beginning of construction of the final steps. This research focuses on the review of the most of the existing green materials definitions and various approaches towards using eco-efficient construction materials. It presents and discusses possible ways of reducing the destructive effects on the environment by selecting and using green materials, review current literature and highlight the necessity of applying such materials in future constructions in all communities. This paper provides a base for this purpose that sustainable development communities and environment is realized by elimination of environmental pollution and approaching the criteria of green building by using sustainable materials.