• Parasites, Hosts and Diseases
• /
• v.26 no.2
• /
• pp.73-86
• /
• 1988

The sensitivity and specificity of crude and affinity-purified antigens of Clcnorchis sinensis obtained from the infected rabbits were studied. Stage-specific antigenic proteins from the eggs, metacercariae and adult worms were characterized by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) and enzyme-linked immunosorbent astray (ELISA). The results were as follows: 1. The antibody.binding antigen (ABA) purified from whole worm crude antigen (IVWA) by CNBr-activated Sepharose 4B affinity chromatography made :l specific bands against rabbit antisera on Ouchterlony gel diffusion plate, while WWA made 7 bands. Major WWA protein bands by SDS-PAGE were found at 16, 300~18, 500 and 28, 000~29, 000 daltons, while major ABA protein bands were at 18, 000~21, 000 and 29, 000~31, 000 daltons. The reactivity of ABA with rabbit anti-sera in ELISA was remarkably less sensitive than that of WWA. 2. Molecular weights of egg antigen (EGA), metacercarial antigen (MEA) and adult worm antigen (WWA) of C. sinensis ranged from 15, 000-200, 000 daltons, 15, 000-100, 000 daltons and 11, 000~80, 000 daltons, respectively. Major WWA proteins consisted mainly of polypeptide bands of low molecular weight, less than 31, 000 daltons, while those of EGA and MEA consisted of higher molecular T.eights than 30, 000 daltons. 3. The ELISA reactivities of WWA to rabbit anti.sera were remarkably greater than those of MEA. EGA showed negative reaction throughout the experiments. WWA showed higher optical density (O.D.) than 1.0, when reacted with rabbit anti-sera obtained at 4~6 weeks after the infection. In the rabbit anti-sera later than 12 weeks after the infection, the O.D. reacting witll WWA showed a plateau without variation. MEA shoT.ed relatively low O.D. values (<0.6), when reacted with anti-sera from lightly in(ected groups throughout the experiments, althougll there were some wealth positive cases (O.D.>0.6) ill heavily infected groups. MEA reacted with rabbit anti-sera showed negative results on Ouchterlony gel diffusion plates. Summarizing the above results, it is suggested that the whole worm antigen prepared from the adult worms of C. sinensis is most highly antigenic. However, this antigen might reveal cross reactions with other trematodes such as Paragonimus westermani, therefore, purification of antigenic proteins from the crude antigen is essential 18 increase the sensitivity and specificity for the immuncdiagnosis of clonorchiasis.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.1-12
• /
• 2006

Distributions of water temperature and DO profiles were investigated in Andong Reservoir from 1992 to 2004. Thermal stratification began to form from May of every year. Increasing water temperature of epilimnion, temperature difference between epilimnion and hypolimnion increased until August. Lower oxygen layer was formed at metalimnion from June or July of every year and there were 2 layers depending on each year. The two lower oxygen layers were affected by rainfall and inflow between July and September when thermal stratification was formed. The metalimnetic oxygen minima strongly formed at 2 layers, upper and lower part, when the average rainfall and inflow were ${\geqq}$ 170 mm, ${\geqq}$ 50 $m^3\;sec^{-1}$, respectively. It formed weakly when they were > 400 mm and > 200 $m^3\;sec^{-1}$ for one month. The upper part of low oxygen layers formed on the interface of epilimnion and metalimnion showed larger decreasing rate of DO than temperature and it disappeared around November. The lower part of those farmed on interface of metalimnion and hypolimnion existed until December and disappeared in January, this layer showed larger decreasing rate of temperature than DO. DO increased between the upper and lower part of the low oxygen layers. DO on hypolimnion increased under metalimnion and dramatically decreased near the bottom of the reservoir. Temperature of the inflow during rainy season was similar to that of the reservoir's metalimnion, DO was similar or higher and BOD, COD and SS increased. Density layer caused by turbidity was formed in metalimnion, and turbidity increased under the upper part (oxygen increasing layer) of metalimnetic DO minima layers reaching the maximum at the direct upper part of the lower DO minima layer. The upper part of DO minima layers formed on the interface of epilimnion and metalimnion is related to organic activity on the surface, and the lower part of those was considered to be the result of turbid water inflow to metalimnion during rainy season.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.237-248
• /
• 2018

The vertical distribution of hydrometeor before precipitation near the cloud base has been analyzed using a scanning lidar, rawinsonde data, and Cloud-Resolving Storm Simulator (CReSS). This study mostly focuses on 13 Desember 2016 only. The typical synoptic pattern of lake-effect snowstorm induced easterly in the Yeongdong region. Clouds generated due to high temperature difference between 850 hPa and sea surface (SST) penentrated in the Yeongdong region along with northerly and northeasterly, which eventually resulted precipitation. The cloud base height before the precipitation changed from 750 m to 1,280 m, which was in agreement with that from ceilometer at Sokcho. However, ceilometer tended to detect the cloud base 50 m ~ 100 m below strong signal of lidar backscattering coefficient. As a result, the depolarization ratio increased vertically while the backscattering coefficient decreased about 1,010 m~1,200 m above the ground. Lidar signal might be interpreted to be attenuated with the penetration depth of the cloud layer with of nonspherical hydrometeor (snow, ice cloud). An increase in backscattering signal and a decrease in depolarization ratio occured in the layer of 800 to 1,010 m, probably being associated with an increase in non-spherical particles. There seemed to be a shallow liquid layer with a low depolarization ratio (<0.1) in the layer of 850~900 m. As the altitude increases in the 680 m~850 m, the backscattering coefficient and depolarization ratio increase at the same time. In this range of height, the maximum value (0.6) is displayed. Such a result can be inferred that the nonspherical hydrometeor are distributed by a low density. At this time, the depolarization ratio and the backscattering coefficient did not increase under observed melting layer of 680 m. The lidar has a disadvantage that it is difficult for its beam to penetrate deep into clouds due to attenuation problem. However it is promising to distinguish hydrometeor morphology by utilizing the depolarization ratio and the backscattering coefficient, since its vertical high resolution (2.5 m) enable us to analyze detailed cloud microphysics. It would contribute to understanding cloud microphysics of cold clouds and snowfall when remote sensings including lidar, radar, and in-situ measurements could be timely utilized altogether.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.380-391
• /
• 1993

The experimental study was made to propose the treatment method of wastewater in the high-density fish culture system. The BOD to COD ratios of effluents were almost same to 0.65 in the eel-farm, but were various in the farm rearing together with tilapia etc. A BOD rate curve of the eel-farm effluent could be described mathematically by the equation, $BODu=14.1(1-10^{-0.222t})+30.9(1-10^{-0.035(t-8)})$. Nitrification in Biological Fluidized Bed(BFB) system to treat the fish-farm wastewater could be reduce ammonium level up to $65{\sim}79\%$ when ammonium loading rates were between 0.014 and 0.075g $NH_4/g$ BVS-day. Nitrification efficiency was decreased by organic matters in the wastewater when ammonium loading was low(0.014 g $NH_4/g$ BVS-day). T-N removal ratios were decreased to increase loading in denitrification process, because of low C/N ratio. Based on much higher biological mass concentrations, BFB system takes many advantages of a practical viewpoint, such as stability of treatment efficiency and reduction of necessary site area for the facility, as compared with conventional treatment systems.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• Korean Journal of Environmental Biology
• /
• v.26 no.3
• /
• pp.159-169
• /
• 2008

This study was aimed to classify the intertidal macrozoobenthic community status after 2 years of Sea Prince oil spill, and oil spill effects along oil spreading track from heavily impacted to unaffected reference site. Field sampling was initiated in late February and continued through November 1998 seasonally, after 2.5 years of oil spill. 7 rocky sampling sites were selected among coastal regions coated and/or affected by the Sea Prince spilled oil. Identified species was 158 species, 65 family, 24 order, 9 class, 5 phylum. Mollusca was the dominant faunal group comprising 100 species (63.3%), and followed by 38 species of Crustacea (24.1%), 12 species of Echinodermata (7.6%), 5 species of Porifera (3.2%), and 3 species of Cnidaria (1.9%). On Dugpo of Sori Island, the fewest species was collected from 28 species to 35 species seasonally among sampling stations. But far away Dugpo toward Gamak Bay, the number of species increased, collecting the maximum on Sohwoenggan Island. At the wreck site of Sori Island, especially the species number of attached animals such as poriferans and anthozoans was very low compared to another site. The density and biomass on the higher tidal zone increased toward the low affected sites, but biomass on middle tidal zone decreased. The invertebrate biomass of study area was dependent on the sessile animals. The major dominant species were small-sized barnacles, Chthmallus challengeri, periwinkles, Littorina brevicula, mussels, Septifer virgatus, and so on. The biomass of C. challengeri and L. brevicula on the higher tidal zone was highest in the wreck site of Sori Island and decreased further and further. However, mussels on the middle tidal zone showed the inverse trends because of the larger individual size of mussel inhabited in Sori Island than those of another sites. As a result of community analysis, the effect of oil spill was not found distinctly. Several ecological indices and cluster analysis did not show the meaningful variation with oil track despite of the conspicuous differences among tidal heights. These indicate that the macrozoobenthic community level of oil spreaded zone recovered in some degree after the Sea Prince oil spill accident, but population or individual levels of dominant sessile animals took more recovery times.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.1-14
• /
• 1970

The following results were obtained by surveying the productivity of mulberry fields in Korea. 1. The productivity of mulberry field per 10a in which cocoon can be yield belongs to the range of 9.8∼105kg, and among them the productivity of 20 to 60kg was chiefly distributed. And their average was 50.2kg. 2. In general, the larger the mulberry field in scale per a person is, the lower the productivity of it is, but about 6.6 ares per a person was estimated to be economic scale for high productivity. 3. As far as the texture of soil is concerned, sandy-loam and loam contained a capacity of higher productivity while others like clay and sand that of lower productivity, And the depth of surface soil must be at least 50cm, although 70cm's depth of surface sail could bring about high productivity. 4. Fertilization of 900kg's compost on planting and 1,200kg's that after planting could enhance the productivity, because the use of compost have a positive relation to the productivity. 5. The greater the number of farmer's domestic animals is as a source of organic matter the higher the productivity is. 6. In the case of fertilization of 1,200kg compost, the amount of 20kg's nitrogen per 10 ares as chemical manure was best for high productivity. However, fertilization of 14.7kg's nitrogen as average amount of that, which is far below the standard amount, had been a factor to reduce the productivity of mulberry field. 7. In pruning the low-cut form resulted in high productivity, but as their shape become taller due to the lack of techniques, they were turned out to be non head pruning, thus to produce poor harvest of leaves. 8. The pure mulberry fields showed better productivity than others such as wide and narrow ridge planting and inter-crop planting. 9. As for the degree of planting density, at least 800 trees per 10 ares should be planted to increase the productivity, although the planting of 713 trees per 10 ares could be possible in case of the low stemmed pruning. 10. The hole and tranch in planting must be digged as wider and dipper as possible far the better growth of mulberry tree. 11. On the whole, varieties like NOsang and Y oung-cheun choowoo had a tendency of lower productivity.

• Journal of Nutrition and Health
• /
• v.49 no.4
• /
• pp.247-257
• /
• 2016

Purpose: The aim of this study was to investigate the relationship between instant noodle intake and metabolic factors in Korean adults. Methods: Study subjects were 5,894 (male 2,293, female 3,601) aged 19~64 years who participated in the 2013~2014 KNHANES. Information on frequency and consumption of instant noodles was obtained by the food frequency questionnaires method in KNHANES (Korean National Health and Nutrition Examination Survey), and subjects were classified according to age, sex, and instant noodle consumption (INC). Results: The frequency and consumption of instant noodles was 1.2 times/week and 1.2 servings in subjects. High INC group (${\geq}1$ serving/week) was significantly younger in age compared with the low INC group (< 1 serving/week). However, the high INC group had significantly higher waist circumference, metabolic factors (triglyceride, cholesterol, and HDL-cholesterol), and dietary intake (energy intake, fat, and sodium density) compared with the low INC group. Hyperglycemia showed association with higher risk of highest quartile of INC after adjustments for multiple confounding factors, including age, gender, household income, education, smoking, and alcohol compared with the lowest quartile (OR: 1.4, 95% CI: 1.1-1.8). In female, abdominal obesity showed association with higher risk of highest quartile of INC after adjustments for multiple confounding factors compared with the lowest quartile (OR: 1.6, 95% CI: 1.2-2.2). Conclusion: Consumption of instant noodles was associated with increased prevalence of abdominal obesity and hyperglycemia in women. These findings suggest an association of instant noodle consumption status with metabolic risk.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.75-82
• /
• 2011

Five different composition UV-cured poly(urethane acrylate-co-acrylic acid) (PU-co-AA) films have been prepared by reacting isophorone diisocyanate(IPDI), polycaprolactone triol(PCLT), 2-hydroxyethyl acrylate(HEA), and different weight ratio trimethylolpropane triacrylate(TMPTA) and acrylic acid(AA) as diluents, and characterized using a Fourier transform infrared spectroscopy(FT-IR). The adhesion properties onto the stainless steel, morphology, mechanical hardness, and electrical property of UV-cured PU-co-AA films were investigated as a function of acrylic acid(AA) content. All the PU-co-AA films are structure-less and the molecular ordering and packing density decreased with increasing content of AA due to the flexible structure and -COOH side chains in AA. The crosscut test showed that PU-co-AA films without AA and with low content of AA showed 0% adhesion(0B) and the adhesion of PU-co-AA films in the range of 40-50% AA increased dramatically as the content of AA increases. The pull-off measurements showed that the adhesion force of PU-co-AA films to stainless steel substrate varied from 6 to 31 kgf /$cm^2$ and increased linearly with increasing AA content. The mechanical hardness also decreased as the content of AA increases. This may come from relatively linear and flexible structure in AA and low crystallinity in PU-co-AA films with higher content of AA. The higher AA-containing PU-co-AA films showed higher dielectric constant due to the increase of polarization by introducing AA monomer. In conclusion, the physical properties of UV-cured PU-co-AA films are strongly dependent upon the content of AA and the incorporation of AA in polyurethane acrylate is very useful way to increase the adhesion strength of UV-curable polymers on the stainless steel substrate.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.12 no.1
• /
• pp.14-22
• /
• 2012

Objectives: This study was performed to review clinical manifestations of hyperphenylalaninemia patients in Korean. Methods: 178 cases of hyperphenyalaninemia were diagnosed at department of pediatrics, Soonchunhyang University Hospital from January, 1983 to August. We reviewed DNA analysis, MR imaging, EEG, radiography of the left hand and wrist, bone densitometry (BMD), IQ test of hyperphenyalaninemia patients. Results: Out of 178 cases, 161 cases were diagnosed classic phenylketonuria and 17 cases were diagnosed BH4 deficiency. 122 cases performed DNA analysis. R243Q (10.3%), Y204C (9.9%), and IVS4-1G>A (8.1%) mutations were predominant. 22 cases underwent MR imaging. Varying degrees of symmetrical high signal intensity were noted on T2-weighted sequences in the periventricular deep white matter of 15 cases. 23 cases were performed EEG. 12 cases (52.3%) showed abnormal pattern. EEG abnormalities showed in 11 cases. On lumbar BMD four of 11 cases (36%) showed reduced bone density of more than 1 S.D. in four of 11 cases, bone age was less than chronological age by at least one year. 18 cases were performed IQ test. Mean IQ scores was $84{\pm}21.6$. Among older than 15 years (9 cases), Mean IQ scores was $72{\pm}21.2$. PTPS deficiency was 14 cases, DHPR deficiency was 2 cases, and GTPCH deficiency was 1 case. Conclusion: We confirmed there were varieties of DNA mutations. And MR imaging and EEG were nonspecific in PKU patients. Older children showed lower IQ score. Low phenylalanine diet prevents brain damage in PKU patient. Not only first few years of life but also lifetime, Keeping low phenylalanine diet is important.