• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.562-569
• /
• 2022

The alarm monitoring technology applied to existing operating ships manages data items such as temperature and pressure with AMS (Alarm Monitoring System) and provides an alarm to the crew should these sensing data exceed the normal level range. In addition, the maintenance of existing ships follows the Planned Maintenance System (PMS). whereby the sensing data measured from the equipment is monitored and if it surpasses the set range, maintenance is performed through an alarm, or the corresponding part is replaced in advance after being used for a certain period of time regardless of whether the target device has a malfunction or not. To secure the reliability and operational safety of ship engine operation, it is necessary to enable advanced diagnosis and prediction based on real-time condition monitoring data. To do so, comprehensive measurement of actual ship data, creation of a database, and implementation of a condition diagnosis monitoring system for condition-based predictive maintenance of auxiliary equipment and piping must take place. Furthermore, the system should enable management of auxiliary equipment and piping status information based on a responsive web, and be optimized for screen and resolution so that it can be accessed and used by various mobile devices such as smartphones as well as for viewing on a PC on board. This update cost is low, and the management method is easy. In this paper, we propose CBM (Condition Based Management) technology, for autonomous ships. This core technology is used to identify abnormal phenomena through state diagnosis and monitoring of pumps and purifiers among ship auxiliary equipment, and seawater and steam pipes among pipes. It is intended to provide performance diagnosis and failure prediction of ship auxiliary equipment and piping for convergence analysis, and to support preventive maintenance decision-making.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.1
• /
• pp.41-49
• /
• 2023

A convolutional neural network (CNN) is a representative algorithm for implementing artificial neural networks. CNNs have improved on the issues of rapid increase in calculation amount and low object classification rates, which are associated with a conventional multi-layered fully-connected neural network (FNN). However, because of the rapid development of IT devices, the maximum resolution of images captured by current smartphone and tablet cameras has reached 108 million pixels (MP). Specifically, a traditional CNN algorithm requires a significant cost and time to learn and process simple, high-resolution images. Therefore, this study proposes an improved CNN algorithm for implementing an object classification learning model for simple, high-resolution images. The proposed method alters the adjacency matrix value of the pooling layer's max pooling operation for the CNN algorithm to reduce the high-resolution image learning model's creation time. This study implemented a learning model capable of processing 4, 8, and 12 MP high-resolution images for each altered matrix value. The performance evaluation result showed that the creation time of the learning model implemented with the proposed algorithm decreased by 36.26% for 12 MP images. Compared to the conventional model, the proposed learning model's object recognition accuracy and loss rate were less than 1%, which is within the acceptable error range. Practical verification is necessary through future studies by implementing a learning model with more varied image types and a larger amount of image data than those used in this study.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.706-711
• /
• 1997

Low supply of water is generally the most serious factor limiting rice production. The experiment was conducted to identify the reasonable method for minimum irrigation under ridge direct seeding on dry paddy, at National Honam Agricultural Experiment Station, RDA in 1996. The results showed that the reduction ratio of irrigation water was high in order of furrow irrigation at 15-day>furrow irrigation at 10-day>flooding irrigation at 10-day>, and furrow irrigation at 5-day intervals. However, milled rice yield was high in the furrow irrigation at 5-day intervals and in flooding irrigation at 10-day intervals due to high ripened grain as compared with other treatments indicating two treatments were the most reasonable irrigation methods in terms of saving the labor cost and water supply as well as the admittable yield performance.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.103-109
• /
• 2023

In this paper, we propose a smart wall switch based on IEEE 802.11b/g/n standard 2.4GHz band communication. As the 4th industrial era evolves, smart home solution development is actively underway, and application cases for smart wall switches are increasing. Most of the Chinese products that preoccupy the market through price competitiveness use Bluetooth and Zigbee communication switches. However, while ZigBee communication is low power, communication speed is slower than Bluetooth and network configuration through a separate hub is additionally required. The Bluetooth method has problems in that the communication range and speed are lower than Wi-Fi communication, the communication standby time is relatively long, and security is weak. In this study, an IEEE 802.11b/g/n smart wall switch applied with Wi-Fi communication technology was developed. In addition, through the two-wire structure, it is designed so that no additional cost is incurred through the construction of a separate neutral line in the building. The result of the study is more than 30% cheaper than the existing wall switch, so it is judged that it will be able to preoccupy the market not only in terms of technological competitiveness but also price competitiveness.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.65-70
• /
• 2023

Nanoimprint lithography (NIL) has attracted much attention due to its process simplicity, excellent patternability, process scalability, high productivity, and low processing cost for pattern formation. However, the pattern size that can be implemented on metal materials through conventional NIL technologies is generally limited to the micro level. Here, we introduce a novel hard imprint lithography method, extreme-pressure imprint lithography (EPIL), for the direct nano-to-microscale pattern formation on the surfaces of metal substrates with various thicknesses. The EPIL process allows reliable nanoscopic patterning on diverse surfaces, such as polymers, metals, and ceramics, without the use of ultraviolet (UV) light, laser, imprint resist, or electrical pulse. Micro/nano molds fabricated by laser micromachining and conventional photolithography are utilized for the nanopatterning of Al substrates through precise plastic deformation by applying high load or pressure at room temperature. We demonstrate micro/nanoscale pattern formation on the Al substrates with various thicknesses from 20 ㎛ to 100 mm. Moreover, we also show how to obtain controllable pattern structures on the surface of metallic materials via the versatile EPIL technique. We expect that this imprint lithography-based new approach will be applied to other emerging nanofabrication methods for various device applications with complex geometries on the surface of metallic materials.

• Composites Research
• /
• v.36 no.3
• /
• pp.167-172
• /
• 2023

The manufacturing technology of composite material is applicable with filler characteristics maintaining low cost, flexibility, and easy process to develope the various functional composite materials. To realize functional composites, various researches on the high performance of composite materials using graphene as a filler is being actively conducted. In this study, physical and chemical properties were investigated using graphene to improve high functional properties. Graphene oxide (GO) was prepared using graphane nanoplatelet (GNP), and reduced graphene oxide (R-GO) was formed by reducing GO. The physical properties of GO and R-GO were analyzed, and the reliability of the manufactured method was reviewed by comparing that of GNP results. As a result of analysis by Raman spectroscopy, in the case of R-GO, it was confirmed that the intensity of D-peak and G-peak decreased compared to GO, and an increase of 0.08 was observed through the ratio of ID/IG. For the FTIR results, GO and RGO has a repeating C-C and C=C connection structure unlike GNP. GO and R-GO show clear peaks for C-O bond, C=C bond, C=O bond, and O-H bonding. As a result of X-ray diffraction analysis, GNP showed a wide diffraction peak at 25.86° of (002) plane characteristics, whereas GO and R-GO showed peaks corresponding to (001) and (100) planes. It was also found that the interlayer distance of GO increased by about 2.6 times compared to GNP.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.201-210
• /
• 2023

The Agricultural Environmental Conservation Program is a useful system for creating sustainable agriculture and environmentally friendly and comfortable rural areas. However, there are still many problems and difficulties, such as the establishment of necessary activities and plans by the residents themselves, and improvements are required. The degree of importance and difficulties according to the implementation stage of each stakeholder was quantified and compared with each other, and the specific difficulties recognized by on-site support organizations were structurally analyzed. It was analyzed that the importance and difficulties of the project implementation stage for local government officials and the project implementation planning stage for on-site support organizations were very high, indicating that they perceived the most need for improvement. On the other hand, 21 specific problems and difficulties were derived based on the results of the literature survey and stakeholder interviews. As a result of the structural analysis using the DEMATEL method, the most influential factor was the low understanding of the project by residents, the most influential factor was the lack of collecting and reflecting residents' opinions, the most central factor was the lack of collecting and reflecting residents' opinions, and the most causal factor was the lack of education and promotion of the project. The results indicate that a more stable system can be established if continuous promotion and education, periodic meetings and discussions, active reflection of residents' opinions in project implementation plans, and simplification of implementation inspection and project cost execution through the implementation inspection platform are promoted. Despite the limitations, considering that no institutional analysis of agricultural environmental conservation programs has been conducted so far, the results of this study are expected to serve as a basis for the establishment of relevant policies in the future.

• Membrane Journal
• /
• v.34 no.2
• /
• pp.87-95
• /
• 2024

Recent studies explore a wide array of desalination and water treatment methods, encompassing membrane processes such as reverse osmosis (RO), nanofiltration (NF), and electrodialysis (ED) to advanced capacitive deionization (CDI) and its membrane variant (MCDI). Comparative analyses reveal ED's cost-effectiveness in low-salinity scenarios, while hybrid systems (NF-MCDI, RO-NF-MCDI) show improved salt removal and energy efficiency. Novel ion separation methods (NF-CDI, NF-FCDI) offer enhanced efficacy and energy savings. These studies also highlight the efficiency of these methods in treating complex wastewater specific to various industries. Environmental impact assessments emphasize the need for sustainability in system selection. Additionally, the integration of microfabricated sensors into membranes allows real-time monitoring, advancing technology development. These studies underscore the variety and promise of emerging desalination and water treatment technologies. They provide valuable insights for enhancing efficiency, minimizing energy usage, tackling industry-specific issues, and innovating to surpass conventional method limitations. The future of sustainable water treatment appears bright, with continual advancements focused on improving efficiency, minimizing environmental impact, and ensuring adaptability across diverse applications.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.6
• /
• pp.729-737
• /
• 2008

The purposes of this study were to investigate supporting status and subsidy for school food service and to analyze the perception of school food service officials at the educational board on using rice bread to the school food service menu. The questionnaire was developed by content analysis, situation analysis, in-depth interview and checked by the school food service officials at the educational board. The questionnaires were responded by 33 officials (respondent rate: 86.8%) during September 1 to October 26 in 2007. The major findings of this study were as follows: First, most of the respondents were women (93.9%), and worked an average of 104.36 months at school-related work. The metropolitan & provincial office of education had prevalently jurisdiction over 272.3 rural and self-operation type of elementary schools, 115.50 rural and self-operation type of middle schools and 73.0 rural and self-operation type of high schools. In the case of the district office of education, 23.3 urban and self-operation type of elementary schools, 11.6 urban and self-operation type of middle schools and 5.3 urban and contracted type of high schools were averagely managed. Second, all the respondents supported meal cost for low-income group and 50.5% provided reimbursement for organic environmental agricultural products. The highest subsidy was 16.8 billion won as meal cost for low-income group in metropolitan & provincial office and 1,050 million won as labor cost in district office. Third, the experience of performing policies for using rice was relatively lower than perception of rice bread application to school food service menu. Fourth, the advantages of using rice bread were acceleration of consuming rice (32.0%), excellence of nutrition (24.0%) and promotion of healthy image (22.7%). On the other hand, the difficulties of using rice bread were lack of facilities (72.7%), higher cost compared to wheat bread (54.5%), limitation of menu application and cooking method (15.7% each). Fifth, the opinion of utilizing rice and that of applying rice bread were significantly correlated (p<0.001). Desirability and willingness were correlated with reality for applying rice bread to the school food service menu (p<0.001). Also, comparative analysis between divided groups by perception of utilizing rice showed that willingness and experience were significantly different.

• Journal of Animal Science and Technology
• /
• v.44 no.4
• /
• pp.453-458
• /
• 2002

In order to search for reliable rapid methods of estimating bacterial counts in pork, this study was tried to measure resazurin reduction time which is simple in experimental method, low in analytical cost, able to estimate bacterial count within short time. The results were summarized as follows; Correlation coefficient between initial bacterial log count(25$^{\circ}C$/72hr, Y) and resazurin reduction time(X) from blue color to pink color during incubation at 25$^{\circ}C$ and 30$^{\circ}C$ was higher than other conditions as -0.95 and -0.94, respectively. Considering correlation coefficient and reduction time, incubation temperature was compatible at 30$^{\circ}C$, and regression equation(RE) was Y = -0.4386X + 7.7870. At a bacterial load of $10^2$cfu/$cm^2$, $10^3$cfu/$cm^2$ and $10^4$cfu/$cm^2$ in pork, reduction time was 13.2hr, 10.9hr and 8.6hr, respectively. Correlation coefficient between initial bacterial log count(30$^{\circ}C$/72hr, Y) and resazurin reduction time(X) from blue color to pink color during incubation at 30$^{\circ}C$ was highest among other conditions as -0.93, and RE was Y = -0.4171X + 7.5540. At a bacterial load of $10^2$cfu/$cm^2$, $10^3cfu/$cm^2$ and $10^4cfu/$cm^2$ in pork, reduction time was 13.3hr, 10.9hr and 8.5hr, respectively. Correlation coefficient between initial bacterial log count(35$^{\circ}C$/72hr, Y) and resazurin reduction time(X) from blue color to pink color during incubation at 30$^{\circ}C$ was highest among other conditions as -0.93, and RE was Y = -0.3514X + 6.7513. At a bacterial load of $10^2$cfu/$cm^2$, $10^3$cfu/$cm^2$ and $10^4$cfu/$cm^2$ in pork, reduction time was 13.5hr, 10.7hr and 7.8hr, respectively.