• 제목/요약/키워드: low budget

검색결과 399건 처리시간 0.03초

LPCVD 방법에 의한 저온 $SiO_2$ 박막의 증착방법과 DRAM 커패시터에서의 그 신뢰성 연구 (Novel Low-Temperature Deposition of the $SiO_2$ Thin Film using the LPCVD Method and Evaluation of Its Reliability in the DRAM Capacitors)

  • 안성준;박철근;안승준
    • 한국산학기술학회논문지
    • /
    • 제7권3호
    • /
    • pp.344-349
    • /
    • 2006
  • [ $60{\sim}70nm$ ] 급의 design rule을 가진 고집적 반도체 소자를 제작하려면, 트랜지스터 형성 이후의 공정에서 thermal budget을 줄이기 위하여 공정의 온도를 낮추는 것이 중요하다. 본 연구에서는 고온의 습식 산화막을 대체할 수 있는 저온의 LPCVD (Low-Pressure Chemical Vapor Deposition) $SiO_2$(LTO : Low-Temperature Oxide) 박막 증착공정을 제시하였으며, ONO (Oxide/Nitride/Oxide) 구조의 커패시터를 형성하여 증착된 LTO 박막의 전기적인 신뢰성을 평가하였다. LTO 박막은 5 MV/cm 이하의 전기장 영역에서는 고온의 습식 산화막과 크게 차이가 없는 누설전류 특성을 보였으나, 더 높은 전기장의 영역에서는 훨씬 더 우수함을 보여주었다.

  • PDF

고령자 통행시간예산의 영향요인 규명에 관한 연구 (A Study on the Key Factors Affecting Travel Time Budget for Elderly Pedestrians)

  • 최성택;김수재;장진영;이향숙;추상호
    • 한국ITS학회 논문지
    • /
    • 제14권4호
    • /
    • pp.62-72
    • /
    • 2015
  • 2000년대에 들어 급속한 고령화 사회로 접어든 현 시점에 교통계획 및 수요예측의 관점에서 고령자가 차지하는 비중은 매우 높아지고 있다. 따라서 고령자 그룹의 통행 행태를 분석하고 수요를 추정하는 별도의 과정이 요구된다. 본 연구는 SUR모형을 활용해 고령자의 목적별 통행시간예산의 영향요인을 규명하였다. 통행시간예산은 통행수단의 발달과는 상관없이 하루 약 1시간 정도로 할당된다는 점에 비추어 볼 때, 각 목적별 통행의 영향요인을 규명하기 위해서는 오차항간의 상관성을 고려하는 SUR모형이 적합하다. 분석 결과, 여가목적 통행의 비중이 매우 높으며 개인, 가구, 도시시설, 교통 인프라 등 다양한 요인에 의해 통행시간예산이 영향을 받는 것으로 나타났다. 특히, 여가목적과 관련된 노유자 시설, 운동 시설, 종교 시설 등이 통행시간예산과 양(+)의 상관관계를 갖는 것으로 나타났다. 또한 특정 직업에 종사하지 않거나 월 소득이 낮은 가구에 속한 고령자일수록 사회 경제적 활동의 빈도가 낮아지는 것으로 분석되었다. 이러한 결과는 고령자의 장래 통행행태를 예측하고 수요를 예측하는데 있어 많은 시사점을 제공할 것으로 기대한다.

종합건설사 실행예산 편성 시 리스크 비용 산정에 관한 인식 및 실태에 관한 연구 - 건축공사를 중심으로 - (A Study on the Perceptions and Current Practices in Estimating Risk Cost of Contractor's Construction Budget - Focused on Building Projects -)

  • 최정원;김한수
    • 한국건설관리학회논문집
    • /
    • 제23권3호
    • /
    • pp.13-24
    • /
    • 2022
  • 건설공사는 다양한 리스크에 노출되어 있으며, 건설공사의 리스크는 더욱 증가하는 경향을 보이고 있다. 건설공사의 리스크 증가는 건설사의 리스크 예측 및 대응의 중요성을 더욱 증가시키고 있다. 건설사가 건설공사의 리스크를 대응하는 방법 중 하나는 리스크 비용을 사전에 예측 또는 산정하여 이를 실행예산에 반영하는 것이다. 리스크 비용과 관련하여 다양한 연구들이 수행되어 왔지만, 국내 건설사의 실행예산 편성 시 리스크 비용 산정에 관한 인식과 실태에 관한 분석은 미흡한 것으로 나타났다. 본 연구의 목적은 종합건설사의 실행예산 편성 시 리스크 비용 산정과 관련된 인식과 실태를 조사·분석하여 주요 특징 및 시사점을 도출하는데 있다. 본 연구의 주요 결과를 요약하면 실행예산 편성 시 리스크 비용 반영의 중요성에 대한 인식은 상당히 높았으나, 상대적으로 리스크 비용을 산정하는 수준은 상대적으로 미흡한 것으로 나타났다. 리스크 비용 산정을 효과적으로 수행하기 위해서는 실적 데이터, 가이드라인, 전사적 표준절차 등 실무기반이 구축되어야 하며, 충분한 견적기간도 할애될 필요가 있었다. 또한 리스크 비용 산정을 위해 빅데이터 분석기법을 포함한 정교한 분석기법의 활용에 대한 관심은 높지만 현재 준비 및 활용 수준은 낮은 것으로 나타나 이에 대한 실무 적용성을 높이기 위한 연구개발이 필요하다고 할 수 있다.

학교시설 민자 사업의 효율화 방안 -공공서비스 시설의 복합화 중심으로- (Programs for Higher Efficiency of Private Sector Investment in Educational Facilities -With Focus on Combining of Public Service Facilities-)

  • 강현빈;이재림
    • 교육녹색환경연구
    • /
    • 제8권1호
    • /
    • pp.11-22
    • /
    • 2009
  • School is a basic and the most fundamental facility of city planning just like other basic public facilities including the village office. Every plan is established on the basis of school. However, the problems such as the population reduction resulting from the nuclear family-zation and low birth rate, employment and welfare of the aged people resulting from "the old aged society", and the infant nursing and education resulting from a rapid increase of the working couples become notable and accordingly more requirements are being made. Reflecting this trend, the concept and operation system should be changed. Up to now, the BTL projects of the educational facilities are gaining a reputation of being efficient in terms of national budget running, but at the same time receiving negative reputation in terms of budget saving under the civil creativity and efficiency. Through upgrading the private sector investment projects into the BTO+BTL system and further into the BTO(Build Transfer Operate), we can accomplish the original goals of the private sector investment projects, and can make the education budget operation more efficient, and can greatly improve the education environments. However, we should not underestimate in this process that these facilities should not negatively affect the education environments. In any situation, the owners of schools are students.

  • PDF

한국 노인의료보장제도의 개선방안에 관한 연구 (A Study on the Programs of the Betterment in Medical Care Guarntee for Korean Seniors)

  • 조영환;김현주;박영한
    • The Journal of Korean Physical Therapy
    • /
    • 제10권1호
    • /
    • pp.105-125
    • /
    • 1998
  • We are confronted by increase in old people due to the improvement in medical science, public hygiene and socioeconimic status in 20th century. But our medical security system for old people dees not meet the need for medical service of old people. Current medical insurance system restricts term and extent in allowance although the characteristics of the disease of the aged people need medical care of Bong duration and high cost. And in the medicaid system the speciality of the aged people is not recognized and the budget of the government is scanty. In addition many old people to our country are in economic distress due to low income. But the government authority does not give sufficient consideration for eld people in law, policy and budget. To improve social security system for old people it is necessary to increase the budget for the security of old people, to enhance the traditional respect for the aged, to improve medical security system by improving the accessibility to medical service and by expanding the allowance of medical insurance, and to expand the public welfare institutions. And these are roles for all the family. the society and the nation as well as the aged people themselves.

  • PDF

농어촌도로 정비사업의 정책적 전개방향 (An Alternative Strategy on Minor Rural Road Improvement Project)

  • 최수명;최동진
    • 농촌계획
    • /
    • 제8권2호
    • /
    • pp.42-49
    • /
    • 2002
  • Since legislation of Rural Minor Road Improvement Act 1990, a quarter of its total length had been paved now. However, over 80% of arterial road length(national+provincial roads) had been paved, so, road improvement policy should be focussed on the local road(county+rural minor roads) from now. Generally, in the greater part of coastal plain and island areas, arterial road intensity(total road length/total catchment area) is relatively low, but local road intensity is relatively high. So, in terms of balanced development, much more efforts for rural minor road improvement should be concentrated in coastal plain and islands areas. In Chonnam Province, the maximum differentials of minor rural road improvement ratio was over 20%(the lowest; 14.1% in Goheung, the highest; 35.6% in Goksung) in 1999, but the improvement budget have been allocated in proportion to unpaved road length of each county by the provincial government. However, the differentials should not be fairly narrowed in the near future if the present budget allocation policy be maintained. To solve this problem, target differentials of rural minor road improvement between regions should be set up for each planning year and road improvement budget be allocated according to this policy change.

Performance Test for the SIGMA Communication System

  • Jeong, Seonyeong;Lee, Hyojeong;Lee, Seongwhan;Shin, Jehyuck;Lee, Jungkyu;Jin, Ho
    • Journal of Astronomy and Space Sciences
    • /
    • 제33권4호
    • /
    • pp.335-344
    • /
    • 2016
  • Scientific CubeSat with Instruments for Global Magnetic Fields and Radiations (SIGMA) is a 3-U size CubeSat that will be operated in low earth orbit (LEO). The SIGMA communication system uses a very high frequency (VHF) band for uplink and an ultra high frequency (UHF) band for downlink. Both frequencies belong to an amateur band. The ground station that communicates with SIGMA is located at Kyung Hee Astronomical Observatory (KHAO). For reliable communication, we carried out a laboratory (LAB) test and far-field tests between the CubeSat and a ground station. In the field test, we considered test parameters such as attenuation, antenna deployment, CubeSat body attitude, and Doppler frequency shift in transmitting commands and receiving data. In this paper, we present a communication performance test of SIGMA, a link budget analysis, and a field test process. We also compare the link budget with the field test results of transmitting commands and receiving data.

Efficiency Evaluation of Welfare Facilities for the Elderly Applying AHP and DEA Techniques

  • Lee, Dong Su;Chang, In Hong
    • 통합자연과학논문집
    • /
    • 제8권4호
    • /
    • pp.293-304
    • /
    • 2015
  • This study examined the factors which have influence on the welfare facilities for the elderly and analyzes their efficiency. It investigated theoretical studies and preceding studies and divided the efficiency evaluation factors into input and output factors. Input factors included budget, the number of workers and clients and facility area and output factors were operation management, the number of clients, profitability and welfare for the elderly. To sum up the analysis results of evaluation factors of welfare facilities for the elderly, the analysis of relative importance of input showed that budget was most important. As a result of analyzing the relative importance among detailed items, balance sheet and professional manpower were highest. Input factors by facility types showed that the budget for utility facilities and living facilities were highest. In output factors, utility facilities and living facilities were highest in management systematization and welfare for the elderly, respectively. In efficiency evaluation, utility facilities for the elderly showed 100% of efficiency in CCR and BCC models. In welfare facilities for the elderly, while CCR model showed 100% of efficiency in facility types A, C, D, and F, the efficiency was low in facility B (79.89%), E (77.14%), and G (80.72%). In BCC model, facility E was low as 78.69%. In efficiency comparison between utility facilities and living facilities for the elderly welfare, the efficiency of utility facilities for the elderly welfare was higher. Therefore, this study investigated the efficiency of welfare facilities for the elderly as its main purpose and presented policy suggestions based on the research results as the alternative.

강우기 및 평수기의 팔당호 유기물 수지산정 (Organic Carbon Budget during Rainy and Dry Period in Paldang Reservoir)

  • 이유희;정동일;박혜경
    • 생태와환경
    • /
    • 제37권3호통권108호
    • /
    • pp.272-281
    • /
    • 2004
  • 팔당호의 유기물 수지 산정을 위해 팔당호내 일차생산력을 측정하고 유입하천의 유입유기물량 및 방류유기물량을 측정하여 유기물부하에서 내부생성유기물의 기여도를 평가하였다. 식물플랑크톤에 의한 일차생산력은 지점과 시기에 따라 큰 차이를 보여 3회 조사결과 $101{\sim}2701\;mgC\;m^{-2}day{-1}$의 범위로 나타났으며, 체류시간이 길고, 수체내 클로로필 a농도가 높았던 6월에 모든 지점에서 높은 생산력을 보였다. 빈번한 강우로 체류시간이 짧고 조류현존량이 적었던 4월과 8월의 조사에서는 총 유기물유입량에서 내부생성유기물량은 약 7%를 차지하였고 이중 식물플랑크톤에 의한 내부생산기여도는 약 5%로 매우 낮았다. 그러나 조사일 전후로 강우가 없어 수체가 안정되었고 외부유입유기물량이 적었던 6월 조사에서는 식물플랑크톤에 의한 내부생산 기여도가 29.0%를 보였다.

고효율 후면 전극형 태양전지를 위한 나노 Paste의 적용에 대한 연구 (The application of Nano-paste for high efficiency back contact Solar cell)

  • 남동헌;이규일;박용환
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.53.2-53.2
    • /
    • 2010
  • In this study, we focused on our specialized electrode process for Si back-contact crystalline solar cell. It is different from other well-known back-contact cell process for thermal aspect and specialized process. In general, aluminum makes ohmic contact to the Si wafer and acts as a back surface reflector. And, silver is used for low series resistance metal grid lines. Aluminum was sputtered onto back side of wafer. Next, silver is directly patterned on the wafer by screen printing. The sputtered aluminum was removed by wet etching process after rear silver electrode was formed. In this process, the silver paste must have good printability, electrical property and adhesion strength, before and after the aluminum etching process. Silver paste also needs low temperature firing characteristics to reduce the thermal budget. So it was seriously collected by the products of several company of regarding low temperature firing (below $250^{\circ}C$) and aluminum etching endurance. First of all, silver pastes for etching selectivity were selected to evaluate as low temperature firing condition, electrical properties and adhesive strength. Using the nano- and micron-sized silver paste, so called hybrid type, made low temperature firing. So we could minimize the thermal budget in metallization process. Also the adhesion property greatly depended on the composition of paste, especially added resin and inorganic additives. In this paper, we will show that the metallization process of back-contact solar cell was realized as optimized nano-paste characteristics.

  • PDF