• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1408-1412
• /
• 2013

High power pulse generating technology is to accumulate the energy for relatively long and then to create a strong force by emitting the energy very fast. High power pulse generating technology has recently been using in various fields like environments, industry, research, military and so on. Numerous studies about high power pulse generators have already been performed and commercialized in various conditions. However, in aspect of their size and weight, it is hard to carry the generators which currently have been developed. For these reasons, din nations like America or Russia, the researches have been performed for Ferroelectric Generators(FEG), which have relatively simple structure and are economical. To realize the ferroelectric generator, in this study, we selected the PZTs which have different physical properties respectively, and then shocked them using explosives. The PZT samples with volumes of $0.31{\sim}0.94cm^3$ were depolarized by shocked and produced the waveform that have peak voltages of 4.28 ~ 15kV. The lowest relative permittivity sample generated much higher peak voltage. And sudden voltage drops which seem to be caused by dielectric breakdown were observed in some experiments using low young's modulus samples. Also, increase in thickness led to increase in peak voltage, but the ratio of the voltage rise did not reach the ration of the thickness increase.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.42-50
• /
• 2017

A study has been conducted to develop an aluminum EGR cooler for the LPL EGR system of a diesel engine. Aluminum has a much lower density and thermal conductivity that is about 12 times or more than that of stainless steel, so it is advantageous for use in an EGR cooler for weight reduction and cooling performance effects. A design process has been carried out to ensure heat dissipation performance in a restricted space to investigate the geometric parameters and satisfy the requirements for pressure drops at both fluid sides. The tubes of exhaust gas have been designed as extruded tubes. An aluminum EGR cooler consisting of extruded tubes entails a simpler manufacturing process compared to a stainless steel EGR cooler with conventional heat transfer fins. A prototype has been manufactured from the final model selected through the design process. The performance of the aluminum EGR cooler was evaluated and compared with that of the conventional one. The weight of the aluminum EGR cooler is reduced by 22.9%, while performance is significantly improved.

• Journal of Nutrition and Health
• /
• v.34 no.2
• /
• pp.141-149
• /
• 2001

This study done to investigate the hypocholesterolemic effect of ow dietary fiber in a high cholesterol diet in aspect of cholesterol absorption and excretion using Sprague Dawley rats. After feeding diets containing 0.5% cholesterol and 5% tangerine pulp, sea tangle or prickly pear cactus for four weeks, we measured the levels of plasma and liver cholesterol and triglyceride, fecal neutral sterols and fecal radioactivity after ingestion 14(sup)C-cholesterol. We also examined platelet aggregation and histological change in liver tissues in association of hypercholesterolemia. The liver to body weight ratio was significantly(p<0.01) lower in rats fed prickly pear cactus than in other groups. The levels of plasma total cholesterol, LDL-cholesterol and triglyceride were decreased significantly(p<0.01) in the prickly pear cactus group compared with the control, while there was no difference in the liver levels of total cholesterol and triglyceride among groups. Fecal corprostanol and cholesterol were significantly(p<0.01) higher groups of control and prickly pear cactus compared to the other two groups. Radioisotope excretion after ingestion of 14(sup)C-cholesterol was higher in the control group than in tangerine pulp group or sea tangle group, with the highest in prickly pear group. Radioisotope excretion was the highest during the 2nd and 3rd days in all groups. Hematocrit and platelet aggregation were decreased in all fiber groups compared to the control, but not statistically different. Microscopic examination showed that cholesterol diet cause a fat accumulation in the liver and prickly pear cactus decreased the fat accumulation. Result indicates that prickly pear cactus has hypocholesterolemic effect by decreasing absorption and increasing excretion of cholesterol, thereby protective effect on fatty liver. Control group fed diet containing high cholesterol and low fiber seems to have a self control system in cholesterol absorption and excretion preventing hypercholesterolemia. (Korean J Nutrition 34(2) : 141-149, 2001)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.1004-1009
• /
• 2012

Carbon nanotube are nanostructure with extraordinary field emission properties like high current density, low driving voltage and long time stability, because of their high electrical conductivity, high aspect ratio for geometrical field enhancement and superior thermal stability. But, there is some problem to mate metal and carbon nanotube, we have resolved this problem by using interfacial graphene. This approach takes advantage of superior electric and thermal conductivity between metal and carbon nanotube and shows superior performance compared to the existing field emitters. This result shows that such a carbon nanotube emitter in a stage where it can be used for Field Emission Electric Propulsion (FEEP).

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.21-27
• /
• 2002

Pressure sores are an ulceration and necrosis of the skin and underlying tissue usually occur after prolonged or repeated pressure by interruption of blood flow from the small. vessels to the skin and deep tissue. The management of pressure sores is mostly difficult and requires prolonged hospitalization or repeated surgical interventions with a high recurrence rate. In this article we reviewed 14 cases of National Pressure Ulcer Advisory Pannel staging III, IV over the lateral malleolar area of the ankle in 2 years period from January 1999 to October 2001. The pressure over lateral malleolar area was mainly due to unique Korean sitting position with cross legs at flexed hips and knees or supine position of patient with external rotation of low extremity. Male to female ratio was 11: 3 and ages were between 36 and 83 (mean age: 67.1 years). Associated diseases were DM(7 cases), Hemiparesis caused by CVA(2 cases), Liver cirrhosis(2 cases), disarticulation of opposite hip due to squamous cell ca.(1 case), Intertrochanteric Fx.(1 case). Wound cultures reported Staphylococus, Pseudomonas and others. Abnormally elevated ESR and CRP were seen in 6 cases. Operative treatments were irrigation and debridement, direct closure with gravity drainage and skin grafting. The most important aspect of pressure sore treatment is pressure relief of the lateral malleolar area. Pressure-relieving Cast or Brace was helpful for local management and preventing recurrence.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.221-228
• /
• 2003

In land reclamation construction using marine clay, a measure of material function, that is, the relation between void ratio-effective stress and permeability, is very important aspect for the prediction of self-weight consolidation behavior. But reclaimed ground has very high water content, so there are many difficulties in the laboratory test for measuring material function. For this reason, some researches are carried out using slurry cconsolidometr to measure material function. In this study, material function was measured using slurry consolidometer, and to overcome the shortcoming of researches using slurry cosolidometer, an equation for the prediction of material function was proposed on the basis of column test's parameter. Material function was determined through low stress consolidation test and permeability test, and it also was calculated with the equation using column test parameter. The continuity of material function could be confirmed through these tests. Material function is easily determined with the equation proposed in this study, and can be used for the prediction of self-weight consolidation behavior.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.379-385
• /
• 1999

Minute boehmite crystals with high aspect rations, which were hydrothermally synthesized from gibbsite in $Ba(OH)_2$ solution, occluded Ba with the Ba/Al molar ratio of about 0.03 in their interlayers. Their surface areas were about 14$\m^2$/g. The Ba-intercalated bohemite samples were partly used for producing $BaAl_{12}O){19}$ with low sinterability by externally supplementing $Ba(OH)_2$, and for forming transient aluminas. The surface area of $BaAl_{12}O){19}$ obtained by firing at $1500^{\circ}C$ for 3 h was 5.3$\m^2$/g, which was significantly lower than 12$\m^2$/g of the sol-gel origin. While a mixture ${\gamma}$-alumina and BaO is known to from $BaAl_{12}O){19}$ at $1200^{\circ}C$, solid state reaction between η-alumina transformed from the Ba-intercalated boehmite and BaO formed from $Ba(OH)_2$ deposited on the boehmite started above $1300^{\circ}C$. This suggests that large sized $Ba^{2+}$ ion occluded in η-alumina considerably suppresses the diffusion of $Al^{3+}$ ion. The surface area of the Ba-intercalated boehmite fired at $1400^{\circ}C$ for 3h was as high as 14$\m^2$/g indicative of its potential applicability to combustion catalysts. But it was decreased to 5.0$\m^2$/g after firing at $1500^{\circ}C$ for 3 h, accompanied by abrupt formations of $\alpha$-alumina and $BaAl_{12}O){19}$ as main products. The suppression of $\alpha$-alumina formation up to $1400^{\circ}C$ also suggests the significant blocking effect of $Ba^{2+}$ ion on the diffusion of the component ions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.215-215
• /
• 2010

The feasibility of InSbTe (IST) chalcogenide materials prepared by metalorganic chemical vapor deposition (MOCVD) for phase-change memory (PRAM) applications was demonstrated. Films grown below $225^{\circ}C$ exhibited an amorphous structure, and the films grown at $300^{\circ}C$ Cincluded various crystalline phases such as In-Sb-Te, In-Sb, In-Te, and Sb-Te. The composition of the amorphous films grown at $225^{\circ}C$ was dependent on the working pressure. Films grown at $225^{\circ}C$ exhibited a smooth morphology with a root mean square(rms) roughness of less than 1nm, and the step-coverage of the films grown on a trench structure with an aspect ratio of 5:1 was greater than 90%. An increase in deposition time increased the filling rate, while retaining the conformal step-coverage. Films grown at $225^{\circ}C$ for 3h in a working pressure of $13{\times}10^2$ Pa exhibited a reproducible and complete filling in a trench structure.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.389-394
• /
• 2017

The aim of the research is providing the application method of recycled materials to manufacture the low costed eco-friend block at currently operated concrete block plant. In this research, based on the previous research results on three types of slag cement with illite, desulfurized gypsum, and wasted refractory products, the actual block product was manufactured by the currently operated plant facility and evaluated their properties to suggest the optimal proportions. As an experimental results, in aspect of compressive strength, absorption ratio, freezing resistance, and pH, type III slag incorporating 5% desulfurized gypsum with 1% replaced illite as an aggregate could be suggested as am optimal proportion. In additionally, considering the high cost of the illite, it can be considered as an optimal proportion that type III slag incorporating 5% desulfurized gypsum for binder.

• Advanced Composite Materials
• /
• v.18 no.2
• /
• pp.187-195
• /
• 2009

Much attention has been paid to the processing of inorganic whisker, especially calcium carbonate whisker, which can be used as reinforcement materials of polymer composite due to its low price. Unfortunately, the present synthesis technique of calcium carbonate whisker starts from calcinations of limestone, which involves high energy consumption and furthermore is a highly environment polluting reaction. In this report, needle-like aragonite was synthesized with a reversible solution reaction from limestone without calcination. Optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were used to characterize the morphology and crystal structure of intermediates as well as that of the product, aragonite. GCC (grinding calcium carbonate) powder was dissolved in an aqueous solution of magnesium sulfate with reflux and air flush. EDTA titration was used to evaluate reaction rate of the dissolution. A kinetics equation of the dissolution reaction was constructed, which displayed second-order kinetics with respect to the concentration of magnesium sulfate. A rate constant of $0.0015\;l^{-3}{\cdot}mol^{-1}{\cdot}h^{-1}$ was obtained. The dissolution reaction gave fiber-like magnesium hydroxide sulfate and gypsum crystal. Then needle-like aragonite with a length of $9.13\;{\pm}\;1.02\;{\mu}m$ and an aspect ratio of $5.64\;{\pm}\;1.37$ was synthesized from the dissolution product with $CO_2$ bubbling at $70^{\circ}C$.