• 제목/요약/키워드: low and transport

검색결과 1,680건 처리시간 0.031초

New ETL 층에 의한 저전압 구동 백색 발광 OLED (Low Voltage Driving White OLED with New Electron Transport Layer)

  • 문대규
    • 한국전기전자재료학회논문지
    • /
    • 제22권3호
    • /
    • pp.252-256
    • /
    • 2009
  • We have developed low driving voltage white organic light emitting diode with a new electron transport material, triphenylphosphine oxide ($Ph_{3}PO$). The white light emission was realized with a rubrene yellow dopant and blue-emitting DPVBi layer. The new electron transport layer results in a very high current density at low voltage, resulting in a reduction of driving voltage. The device with a new electron transport layer shows a brightness of $1150\;cd/m^2$ at a low driving voltage of 4.3 V.

대기오염물질의 장거리 수송과 열적저기압의 관계 (Relationship between Thermal Low and Long-Range Transport of Air Pollutants)

  • 이화운;김유근;김해동;정우식;현명숙
    • 한국환경과학회지
    • /
    • 제10권2호
    • /
    • pp.143-151
    • /
    • 2001
  • The atmospheric conditions and the transport mechanism of long-range transport of air pollutants from coastal area to inland area were investigated using regular meteorological data and air pollution data obtatined from the southeastern area of Korea. Daytime temperature over the inland area(Taegu) was higher than that over the coastal area(Pusan) and the temperature difference of about 5~6$^{\circ}C$ when the thermal low most fully developed and the sea level pressure over Taegu was lower than that over Pusan by about 4~5hPa at that time. Therefore this low pressure appeared to the thermally induced low. Air mass polluted from the coastal area during the morning period was transported inland area, at first by the sea breeze and by the large scale wind system toward the thermal low generated in the mountainous inland region. This was explained by the fact that the concentration of air pollutants over Taegu increased throughtout the late afternoon.

  • PDF

New ETL 층에 의한 저전압 구동 백색 발광 OLED (Low voltage driving white OLED with new electron transport layer)

  • 김태용;서원규;문대규
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.100-101
    • /
    • 2008
  • We have developed low voltage driving white organic light emitting diode with new electron transport layer. The with light emission was realized with a yellow dopant, rubrene and blue-emitting DPVBi layer. The new electron transport layer results in very high current density at low voltage, causing a reduction of driving voltage. The device with new electron transport layer shows a brightness of 1000 cd/m2 at 4.3 V.

  • PDF

Numerical analysis of particle transport in low-pressure, low-temperature plasma environment

  • Kim, Heon Chang
    • 한국입자에어로졸학회지
    • /
    • 제5권3호
    • /
    • pp.123-131
    • /
    • 2009
  • This paper presents simulation results of particle transport in low-pressure, low-temperature plasma environment. The size dependent transport of particles in the plasma is investigated with a two-dimensional simulation tool developed in-house for plasma chamber analysis and design. The plasma model consists of the first two and three moments of the Boltzmann equation for ion and electron fluids respectively, coupled to Poisson's equation for the self-consistent electric field. The particle transport model takes into account all important factors, such as gravitational, electrostatic, ion drag, neutral drag and Brownian forces, affecting the motion of particles in the plasma environment. The particle transport model coupled with both neutral fluid and plasma models is simulated through a Lagrangian approach tracking the individual trajectory of each particle by taking a force balance on the particle. The size dependant trap locations of particles ranging from a few nm to a few ${\mu}m$ are identified in both electropositive and electronegative plasmas. The simulation results show that particles are trapped at locations where the forces acting on them balance. While fine particles tend to be trapped in the bulk, large particles accumulate near bottom sheath boundaries and around material interfaces, such as wafer and electrode edges where a sudden change in electric field occurs. Overall, small particles form a "dome" shape around the center of the plasma reactor and are also trapped in a "ring" near the radial sheath boundaries, while larger particles accumulate only in the "ring". These simulation results are qualitatively in good agreement with experimental observation.

  • PDF

고농도 삼투환경에서 생성되는 포도상구균의 Proline과 Glycine Betaine Transport System의 수준변화에 관한 연구 (Levels of the Proline and Glycine Betaine Transport Systems of Staphylococcus aureus at High Osmolarity)

  • 배지현
    • 동아시아식생활학회지
    • /
    • 제5권2호
    • /
    • pp.19-26
    • /
    • 1995
  • Staphylococcus aureus, the most salt-tolerant nonhalophilic bacterium, is the only foodborne pathogen that is able to grow at a levels below 0.90. The fundamental osmorgulatory strategy used by this organism involves the accumulation of intracellular compatible solutes such as proline or glycine betaine which are accumulated by transport and act as osmoregulators in cells. In this study, levels of proline transport systems and glycine betaine transport system of S. aureus were examined when cells are grown at high osmolarity. The levels of all three transport systems within S. aureus were elevated at high osmolarity and the most dramatic increase was found for the low-affinity proline transport system. However, in 5mM glycine betaine-supplemented medium, the level of the low-affinity proline transport system did not become elevated when cultures were grown at high osmolarity. The metabolic fate of the accumulated proline and glycine getaine was investigated by thin-layer chromatography an found to be not metabolized by S. aureus.

  • PDF

Multilevel acceleration of scattering-source iterations with application to electron transport

  • Drumm, Clif;Fan, Wesley
    • Nuclear Engineering and Technology
    • /
    • 제49권6호
    • /
    • pp.1114-1124
    • /
    • 2017
  • Acceleration/preconditioning strategies available in the SCEPTRE radiation transport code are described. A flexible transport synthetic acceleration (TSA) algorithm that uses a low-order discrete-ordinates ($S_N$) or spherical-harmonics ($P_N$) solve to accelerate convergence of a high-order $S_N$ source-iteration (SI) solve is described. Convergence of the low-order solves can be further accelerated by applying off-the-shelf incomplete-factorization or algebraic-multigrid methods. Also available is an algorithm that uses a generalized minimum residual (GMRES) iterative method rather than SI for convergence, using a parallel sweep-based solver to build up a Krylov subspace. TSA has been applied as a preconditioner to accelerate the convergence of the GMRES iterations. The methods are applied to several problems involving electron transport and problems with artificial cross sections with large scattering ratios. These methods were compared and evaluated by considering material discontinuities and scattering anisotropy. Observed accelerations obtained are highly problem dependent, but speedup factors around 10 have been observed in typical applications.

교통소외지역 자율주행 모빌리티 서비스를 위한 도로 환경 분석 : 대구광역시와 세종특별자치시를 중심으로 (Comparison Analysis of the Road Environment between Urban and Suburban Area for Connected and Automated Driving(CAD) Mobility Services)

  • 김아름;우보람;탁세현;임서현
    • 한국ITS학회 논문지
    • /
    • 제21권5호
    • /
    • pp.287-300
    • /
    • 2022
  • 최근 고령사회로 접어든 우리나라에서 고령자가 밀집한 교통소외지역의 이동권 확보를 위해 자율주행 서비스가 대두되고 있다. 기존의 자율주행 관련 연구들은 도시 및 고속도로와 같은 교통수요가 많은 지역에 초점이 맞춰져 있고, 교통소외지역에 자율주행 서비스를 제공하기 위한 연구는 부족한 실정이다. 이를 위해서 교통소외지역의 도로 환경 및 인프라 환경을 조사하는 것이 선행되어야 한다. 도시와 교통소외지역의 도로 환경 차이는 자율주행에 중요한 요소인 운행설계영역(ODD)와 관련된 주행 기술을 필요로 한다. 본 연구에서는 운행설계영역 측면에서 교통소외지역과 도시지역 간 유사한 도로 환경 요소와 차이를 보이는 요소를 비교 분석하였다. 교통소외지역의 도로 환경 중 Sidewalk, Boarding zones, Slope는 도시지역 여건과 차이를 보여 자율주행 운행설계영역 확장을 위한 기술적 고려가 필요한 상황이다.

Effect of loading density and weather conditions on animal welfare and meat quality of slaughter pigs

  • Jaewoo An;Yongju Kim;Minho Song;Jungseok Choi;Won Yun;Hanjin Oh;Seyeon Chang;Youngbin Go;Dongcheol Song;Hyunah Cho;Sanghun Park;Yuna Kim;Yunhwan Park;Gyutae Park;Sehyuk Oh;Jinho Cho
    • Journal of Animal Science and Technology
    • /
    • 제65권6호
    • /
    • pp.1323-1340
    • /
    • 2023
  • There are several factors that affect the welfare and meat quality of pigs during pre-slaughter transport. Among various factors, the effects of weather conditions and loading density were studied. A total of 3,726 finishing pigs were allotted to one of nine groups arranged in a 3 × 3 factorial design according to the weather conditions (low temperature [LT], under 10℃; normal temperature [NT], 10℃-24℃; high temperature [HT], upper 24℃), and loading density (low density [LD], upper 0.43 m2/100 kg; normal density [ND], 0.37-0.43 m2/100 kg; high density [HD], under 0.37 m2/100 kg). Each treatment group follow as: LTLD, LTND, LTHD, NTLD, NTND, NTHD, HTLD, HTND, HTHD. In terms of carcass composition, pigs had the highest carcass weight and backfat thickness at LT. Comparing the HD transport to the ND transport, the meat quality indicated a lower pH and more drip loss. The incidence rate of pale, soft, exudative (PSE) pork was high in the order of the HD, LD, and the ND transport (20%, 9%, and 2%, respectively). The HT transport showed the lowest pH and greatest L* value under the given weather conditions. Pigs transported under the HTHD and LTLD conditions had the greatest rates of PSE pork (40% and 20%, respectively). Pigs exposed to HD transport had the shortest laying time and the highest overplap behavior. The LDLT transport pigs had a shorter laying time than the LDNT and LDHT transport pigs. In conclusion, too high or too low density transport is generally not excellent for meat quality or animal welfare, however it is preferable to transport at a slightly low density at high temperature and at a slightly high density at low temperature.

An Approach to the Localization of Technology for a Transport and Storage Container for Very Low-Level Radioactive Liquid Waste

  • Shin, Seung Hun;Choi, Woo Nyun;Yoon, Seungbin;Lee, Un Jang;Park, Hye Min;Kim, Hee Reyoung
    • 방사성폐기물학회지
    • /
    • 제20권1호
    • /
    • pp.127-131
    • /
    • 2022
  • The structural safety of prototype transport and storage containers for very low-level radioactive liquid waste was experimentally estimated for its localization development. Transport containers for radioactive liquid waste have been researched and developed, however, there are no standardized commercial containers for very low-level radioactive waste in Korea. In this study, the structural safety of the designated IP-2 type container capable of transporting and temporarily storing large amounts of very low-level liquid waste, which is generated during the operation and decommissioning of nuclear power plants, was demonstrated. The stacking and drop tests, which were conducted to determine the structural integrity of the container, verified that there was no external leakage of the contents in spite of its structural deformation due to the drop impact. This study shows the effort required for the localization of the technology used in manufacturing transport and storage containers for very low-level radioactive liquid waste, and the additional structural reinforcement of the container in which the commercial intermediate bulk container (IBC) external frame was coupled.

Fabrication and Electrical Transport Characteristics of All-Perovskite Oxide DyMnO3/Nb-1.0 wt% Doped SrTiO3 Heterostructures

  • Wang, Wei Tian
    • 한국재료학회지
    • /
    • 제30권7호
    • /
    • pp.333-337
    • /
    • 2020
  • Orthorhombic DyMnO3 films are fabricated epitaxially on Nb-1.0 wt%-doped SrTiO3 single crystal substrates using pulsed laser deposition technique. The structure of the deposited DyMnO3 films is studied by X-ray diffraction, and the epitaxial relationship between the film and the substrate is determined. The electrical transport properties reveal the diodelike rectifying behaviors in the all-perovskite oxide junctions over a wide temperature range (100 ~ 340 K). The forward current is exponentially related to the forward bias voltage, and the extracted ideality factors show distinct transport mechanisms in high and low positive regions. The leakage current increases with increasing reverse bias voltage, and the breakdown voltage decreases with decrease temperature, a consequence of tunneling effects because the leakage current at low temperature is larger than that at high temperature. The determined built-in potentials are 0.37 V in the low bias region, and 0.11 V in the high bias region, respectively. The results show the importance of temperature and applied bias in determining the electrical transport characteristics of all-perovskite oxide heterostructures.