• 한국음향학회지
• /
• 제25권1호
• /
• pp.7-13
• /
• 2006

잡는 어업에서 기르는 어업으로 전환하는 수산정책 과정에서 바다목장사업은 바다목장을 설치한 해역에서 육상에서 식이음으로 순치시킨 치어를 방류하여 사료투입시, 또는 성장한 어류들을 모이게 하는 수단으로 순치음을 해양에 방사하기 위해서는 수중 스피커의 개발이 필요하다. 본 연구에서는 수중에서 어류의 발생음과 인공적으로 음을 방성했을 때 어류반응에 대한 연구문헌을 조사하였다. 그 결과, 민감하게 반응하는 주파수는 $150Hz\~2kHz$이고 음압레벨은 $100dB\~150dB$ ($1{{\mu}$ Pa를 0dB)로 조사되었다. 따라서 수중 스피커 설계 제작시 주파수대역과 출력레벨의 사양은 $150Hz\~3kHz,\;100dB\~145dB$로 설정하였다. 그리고 설계사양 등가회로에 의한 전기임피던스 곡선과 반공진주파수를 등가회로법으로 구하고 수중 스피커를 제작하였다. 설계 제작된 수중 스피커를 수압탱크에서 안정성 평가와 최저 사용 주파수 범위를 결정하는 전기임피던스 특성실험을 실시하였으며 수심 10m에서 수중 스피커를 설치하여 해상실험을 한 결과를 정리하고, 제반 음향특성의 실험결과를 기술하였다.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1742-1756
• /
• 1997

The acoustic characteristics of a direct radiator type loudspeaker has been studied in this paper. The natural modes of the speaker cone vibration analyzed numerically by the finite element method have been verified by comparing them with experimental results. The so-ap-proved finite-element model has been used to calculate the vibration response of the cone excited by the voice coil. The vibration displacement of the speaker cone paper has been converted into the vibration velocity and used as a boundary condition for the acoustic analysis. The frequency characteristics, directivity, and sound pressure distribution of the loudspeaker have been calculated by the boundary element method. The numerical results have been verified by the experiments carried out in an anechoic chamber. The variations of the acoustic characteristics due to the changes of some design parameter values can be examined using the numerical model.

• 한국소음진동공학회논문집
• /
• 제18권7호
• /
• pp.701-710
• /
• 2008

Including a TV set and a monitor, personal audio system is raising a great interest. In this study, we applied a method to make a good bright zone around the user and dark zone to other region by maximizing the ratio of sound energy between the bright and dark zone. It has been well known as acoustic contrast control. We have attempted to use a line loudspeaker array system to localize the sound in our listening zone. It depends on the size of the zone and array parameters, for example, array size, loudspeaker unit spacing, wave length of sound. We have considered these parameters as spatial variables and studied the effects. And we have found that each spatial variable has its own characteristic and shows very different effect. Genetic algorithms are introduced to find out the optimum value of spatial variables. As a result, we can improve the result of the acoustic contrast control by optimum value of spatial variables.

• 한국음향학회지
• /
• 제37권5호
• /
• pp.317-322
• /
• 2018

다이내믹 스피커에서 보이스 코일에 전류가 입력되면 Joule 효과에 의해 많은 열이 발생하게 된다. 이 열을 자기회로의 밖으로 방출하기 위하여 폴피스의 중앙에 구멍을 뚫기도 한다. 이 구멍은 열의 방출뿐만 아니라, 다이내믹 스피커의 음향특성도 변화시킬 수 있는 원인이 되기도 한다. 특히 공명주파수가 구멍의 지름과 정비례하여 증가하는 반면에, 구멍의 길이에 반비례하는 것을 알 수 있었다. 이러한 결과들은 위상반전형 스피커시스템의 기계적 등가회로 해석에 따른 이론적 예측과 정확하게 일치하였다. 따라서 다이내믹 스피커의 폴피스에 존재하는 구멍은 위상반전형 스피커시스템에서의 덕트로 취급할 수 있다.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.537-548
• /
• 2014

In this paper, horn loudspeaker modeling was suggested, investigated and verified through comparison of test results and simulation ones based on input electrical impedance curves and acoustic sensitivity ones. First, Thiele Small parameters of horn driver were identified by using pseudo loudspeaker model concept and verified in case of both closed and open horndriver. Second, cone-shaped horn models were investigated and compared with input acoustic impedance curves for real horn(cone angle $6.6^{\circ}$) and short horn(cone angle $27.9^{\circ}$). It showed that Leach model for cone horn was well described to test results, which were electrical impedance and acoustic sensitivity, compared to Lemaitre one. To represent horn system model good approximation in wide frequency range, mass correction filter and lowpass filter were adopted and consequently showed good fitted to test results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.568-574
• /
• 1998

A systematic procedure for designing a direct-radiator-type loudspeaker has been developed, based on a numerical vibro-acoustic analysis and the Taguchi method. The finite-element model of the speaker cone has been used to calculate the vibration response of the cone excited by the voice coil. The vibration response of the speaker cone has been used as a boundary condition for the acoustic analysis, and the acoustic frequency characteristics of the loudspeaker have been calculated by the boundary element method. The numerical model has been confirmed by comparing the numerical results with experimental ones obtained in an anechoic chamber. Some design parameters contributing dominantly to the acoustic characteristics have been selected by using the Taguchi method, and the variations of the acoustic characteristics due to the changes of the parameter values have been examined using the numerical model.

• 소음진동
• /
• 제8권5호
• /
• pp.887-899
• /
• 1998

It has been resulted that Lagrange multiplier method with statistical approach was superior to traditional harmonic balance method in identifying the nonlinear loudspeaker parameters when output signals were contaminated with Gaussian random noise. We have known that the displacement-dependent characteristic values of nonlinear parameters identified by traditional harmonic balance method were estimated less than original values by the increase of output noise and the stiffness coefficients were very sensitive to output noise. Also, by the sensitivity analysis we have verified that the harmonic distortions in acoustic radiation was mainly due to nonlinearity of force factor caused by uneven magnetic fields and that reducing the nonlinearity of damping coefficients were very effective for improving second harmonic distrotion of acoustic radiation.

• 한국소음진동공학회논문집
• /
• 제14권2호
• /
• pp.157-163
• /
• 2004

Optimal transducer positions are important as much as the control algorithms and hardware performance in the active noise control system. This study is similar to the past researches on the optimal transducer locations but with a far field noise source having a plane wave characteristic and the noise coming through an opening such as a window in an enclosure. Optimization techniques are used to find sets of optimal loudspeaker positions from a larger possible loudspeaker positions. Loudspeakers are placed on the surface of opening at the wall and inside of the enclosure. Using the measured acoustic transfer impedances and numerical simulations with the optimization technique, optimal positions are identified and compared. When a small number of loudspeakers are used. loudspeaker positions on the opening near the center seems to be the best place, but when a larger number of loudspeakers are used it was difficult to find simple patterns in the optimal positions. With the optimally positioned loudspeakers, optimal microphone positions are also studied.

• The Journal of the Acoustical Society of Korea
• /
• 제13권1E호
• /
• pp.37-44
• /
• 1994

저주파 대역에서의 스피커 왜곡을 무향실 없이 측정할 수 있는 방법을 제안한다. 이 방법은 제 n고조파의 경우 밀폐형 스피커 내부에 비해 외부에서 40log n dB 증폭된다는 사실에 기초를 두고 있다. 인클로저 내부의 정재파에 의한 영향을 상쇄함으로써 측정가능한 주파수 대역을 넓혔으며 측정오차의 원인을 분석하였다.

• 수산해양기술연구
• /
• 제30권2호
• /
• pp.125-131
• /
• 1994

This paper describes a method to measure the distortion level of loudspeaker using a LMS(Least Mean Square) adaptive filter. Conventional technique to measure the distortion level uses a band-pass filter with a sharp cut-off frequency characteristics. However. such the band-pass filter has a bed time response characteristics. On the other hand, the proposed method offers us an easy way to measure the specified harmonic distortion level with a small hardware. Moreover, our method is not affected by noise which has no correlation with the test signal, and the measurement can be carried out in a noisy environment. The effectiveness of the proposed method is confirmed by experiment using a loudspeaker in a noisy room.