• Wind and Structures
• /
• v.23 no.2
• /
• pp.157-169
• /
• 2016

The structural integrity of tube bundles represents a major concern when dealing with high risk industries, such as nuclear steam generators, where the rupture of a tube or tubes will lead to the undesired mixing of the primary and secondary fluids. Flow-induced vibration is one of the major concerns that could compromise the structural integrity. The vibration is caused by fluid flow excitation. While there are several excitation mechanisms that could contribute to these vibrations, fluidelastic instability is generally regarded as the most severe. When this mechanism prevails, it could cause serious damage to tube arrays in a very short period of time. The tubes are therefore stiffened by means of supports to avoid these vibrations. To accommodate the thermal expansion of the tube, as well as to facilitate the installation of these tube bundles, clearances are allowed between the tubes and their supports. Progressive tube wear and chemical cleaning gradually increases the clearances between the tubes and their supports, which can lead to more frequent and severe tube/support impact and rubbing. These increased impacts can lead to tube damage due to fatigue and/or wear at the support locations. This paper presents simulations of a loosely supported multi-span U-bend tube subjected to turbulence and fluidelastic instability forces. The mathematical model for the loosely-supported tubes and the fluidelastic instability model is presented. The model is then utilized to simulate the nonlinear response of a U-bend tube with flat bar supports subjected to cross-flow. The effect of the support clearance as well as the support offset are investigated. Special attention is given to the tube/support interaction parameters that affect wear, such as impact and normal work rate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.402-403
• /
• 2014

Damping of multi-span tube with loose supports according to the finite support clearances is investigated through the experimental modal analysis. Loose intermediate support leads to strong nonlinearity in tube dynamics, provides statistical nature, and increases tube damping through impacting and friction at the supports. Fraction of critical damping was estimated by the modal curve fitting to parameter estimation from the measured frequency response functions. Magnitude of random excitation force, which can reproduce the in-situ excitation in operating environment, was maintained as constant value with a fine tolerance during vibration testing. Range of input force was carefully selected to cover from the low magnitude excitation for linearly behaved tube motion to high magnitude of force for nonlinearly-behaved tube motion. Estimated critical damping ratio shows scatters in data and tends to increase as the magnitude of rising force and decrease with upward frequency variation. Larger size of support gap increases multi-span tube damping for high magnitude of excitation.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.677-681
• /
• 2009

The Smoothly Coupled Integration (SCI) proposed in this paper takes only the strength of loosely coupled integration and tightly coupled integration. Furthermore, 3G network and WiBro network, which are coupled with SCI, have independent architecture which supports mobility and seamless services by fast handoff. Computer simulation with the use of OPNET marked excellence in performance of smoothly coupled integration.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.39-53
• /
• 2004

Data production systems are generally very large, distributed and complex systems used for creating advanced (mainly statistical) reports. Typically, data is gathered periodically and then subsequently aggregated and separated during numerous production steps. These production steps are arranged in a specific sequence (workflow or production chain), and can be located worldwide. Today, a need for improving and automating methods of supervision for data production systems has been recognized. Supervision in this context entails planning, monitoring and controlling data production. Two significant approaches are introduced here for improving this supervision. The first is a 'closely-coupledd' approach (meaning direct communication between production jobs and supervisory tool, informing the supervisory tod immediately about delays in production) - based upon traditional production planning methods typically used for manufacturing (goods) and adopted for working with data production. The second is a 'loosely-coupled' approach (meaning no direct communication between supervisory tool and production jobs is used) - having its origins in proven traditional project management. The supervisory tool just enquires continuously the progress of production. In both cases, dates, costs, resources, and system health information is made available to management. production operators and administrators to support a timely and smooth production of periodic data. Both approaches are theoretically described and compared. The main finding is that, both are useful, but in different cases. The main advantages of the closely coupled approach are the large production optimisation potential and a production overview in form of a job execution plan, whereas the loosely coupled method mainly supports unhindered job execution and offers a sophisticated production overview in form of a milestone schedule. Ideas for further research include investigation of other potential approaches and theoretical and practical comparison.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.501-512
• /
• 2006

XML is the most popular platform-independent data expression which is used to communicate between loosely coupled heterogeneous systems such as B2B Applications or Workflow systems. The powerful query language XQuery has been developed to support diverse needs for querying XML documents. XQuery is designed to configure results from diverse data sources into a uniquely structured query result. Therefore, it became the standard for the XML query language. Although the latest XQuery supports heavy search functions including iterations, the grouping mechanism for data is too primitive and makes the query expression difficult and complex. Therefore, this work is focused on supporting the groupby clause in the query expression to process XQuery grouping. We suggest it to be a more efficient way to process grouping for restructuring and aggregation functions on XML data. We propose an XQuery EBNF that includes the groupby clause and implemented an XQuery processing system with grouping functions based on the eXist Native XML Database.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.5
• /
• pp.1083-1097
• /
• 1998

The conventional geographic information systems(GIS) is a software which handles spatial and aspatial information of objects in the real world. The system can not support users time-varying information because it manipulates their snapshot data in the spatial database. Also even though it supports time-varying information, it is very limited and hs many difficulties in presenting and processing queries. This paper therefore describes an integrated spatiotemporal data model using loosely-coupled approach which is extended a time dimension for the previous spatial database and which handles time-varying historical information of spatial objects. Conclusionally this paper not only designed a data structure for spatiotemporal database, but also implemented spatial comparison operations varying over time.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.2
• /
• pp.68-74
• /
• 2015

Time domain response analysis for vibro-impact nonlinear behavior of multi-span tube with loose supports was performed using commercial FEA code and user subroutine. Support geometry of multi-span tube with a finite gap is realistically modeled by analytical rigid surface. Model of hydrodynamic force is based on the Qusai-steady model which accounts for the inclined angle of relative flow velocity and time delay between flow force and resulting tube motion. During tube vibration from flow loading, impact and friction at the support location is simulated using commercial FEA code with master slave contact algorithm. Analysis results has reasonable agreement with those of references and test experience. Plan of further refinement of analysis model and future test verification is briefly introduced.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.39-58
• /
• 2014

As the importance of big data and related technologies continues to grow in the industry, it has become highlighted to visualize results of processing and analyzing big data. Visualization of data delivers people effectiveness and clarity for understanding the result of analyzing. By the way, visualization has a role as the GUI (Graphical User Interface) that supports communications between people and analysis systems. Usually to make development and maintenance easier, these GUI parts should be loosely coupled from the parts of processing and analyzing data. And also to implement a loosely coupled architecture, it is necessary to adopt design patterns such as MVC (Model-View-Controller) which is designed for minimizing coupling between UI part and data processing part. On the other hand, big data can be classified as structured data and unstructured data. The visualization of structured data is relatively easy to unstructured data. For all that, as it has been spread out that the people utilize and analyze unstructured data, they usually develop the visualization system only for each project to overcome the limitation traditional visualization system for structured data. Furthermore, for text data which covers a huge part of unstructured data, visualization of data is more difficult. It results from the complexity of technology for analyzing text data as like linguistic analysis, text mining, social network analysis, and so on. And also those technologies are not standardized. This situation makes it more difficult to reuse the visualization system of a project to other projects. We assume that the reason is lack of commonality design of visualization system considering to expanse it to other system. In our research, we suggest a common information model for visualizing text data and propose a comprehensive and reusable framework, TexVizu, for visualizing text data. At first, we survey representative researches in text visualization era. And also we identify common elements for text visualization and common patterns among various cases of its. And then we review and analyze elements and patterns with three different viewpoints as structural viewpoint, interactive viewpoint, and semantic viewpoint. And then we design an integrated model of text data which represent elements for visualization. The structural viewpoint is for identifying structural element from various text documents as like title, author, body, and so on. The interactive viewpoint is for identifying the types of relations and interactions between text documents as like post, comment, reply and so on. The semantic viewpoint is for identifying semantic elements which extracted from analyzing text data linguistically and are represented as tags for classifying types of entity as like people, place or location, time, event and so on. After then we extract and choose common requirements for visualizing text data. The requirements are categorized as four types which are structure information, content information, relation information, trend information. Each type of requirements comprised with required visualization techniques, data and goal (what to know). These requirements are common and key requirement for design a framework which keep that a visualization system are loosely coupled from data processing or analyzing system. Finally we designed a common text visualization framework, TexVizu which is reusable and expansible for various visualization projects by collaborating with various Text Data Loader and Analytical Text Data Visualizer via common interfaces as like ITextDataLoader and IATDProvider. And also TexVisu is comprised with Analytical Text Data Model, Analytical Text Data Storage and Analytical Text Data Controller. In this framework, external components are the specifications of required interfaces for collaborating with this framework. As an experiment, we also adopt this framework into two text visualization systems as like a social opinion mining system and an online news analysis system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.6
• /
• pp.106-117
• /
• 2003

The advanced medical information systems usually consist of loosely-coupled interaction of independent systems, such as HIS/RIS and PACS. To support easier information exchange between these systems and between hospitals, and to support new types of medical service such as teleradiology, it becomes essential to integrate separated medical information and allow them to be exchanged and retrieved through internet. This thesis proposes an integrated medical information system using XML. We analyzed HL7 and DICOM standard formats, and designed an integrated XML DTD. We extracted information from HL7 messages and DICOM files and generated XML document instances and XSL stylesheets based on the proposed XML DTD. We implemented the web interface for the integrated medical information system, which supports data sharing, information exchange and retrieval between two different standard formats. The proposed XML-based integrated medical information system will contribute to solve the problems of current medical information systems, by enabling integration of separated medical informations and by allowing data exchange and sharing through internet. The proposed system with XML is more robust than web-based medical information systems developed by using HTML, because XML itself provides more flexibility and extensibility than HTML.

• Journal of Korean Home Economics Education Association
• /
• v.27 no.3
• /
• pp.79-97
• /
• 2015

Curriculum may be defined as everything students learn at school or the specific plan of a subject that students are supposed to learn. The purpose and goals of the curriculum or who is in charge of developing the curriculum may differ by country. This study aimed at comparing the mechanisms in which the Home Economics curriculum is implemented in Korea and the Unite States at different levels. Considering that Korean government now supports increased autonomy of schools, allowing them to execute curricula according to their educational environments, it is meaningful that the advantages and disadvantages of the implementation mechanisms of two countries are explored. Specifically, middle schools in a City of Kyung-gi Province in South Korea and three states(Wisconsin, Ohio, and Washington states) in the United States are examined. The curriculum documents at different levels as well as study plans used by actual teachers are compared for this purpose. In case of South Korea, the nation state is in charge of curriculum development and the curriculum document defines the educational contents to detail in order to provide standardized learning experience to students. This type of closely controlled system warrants standardized educational contents and thus allows nation-wide assessment using standardized measures. On the other hand, it is difficult to accommodate diversities among students in terms of aptitudes and learning styles, and also limits creativity enhancement or integrative approach to teaching and learning. In comparison, curriculum in the United States is rather loosely defined, and more autonomy is granted to schools and teachers. Each of these two different systems may have advantages and disadvantages of their own. The findings of this study is expected to provide implications to curriculum development as well as to the development of framework and guidelines to the curriculum implementation.