• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2014

There is a big risk of bullet impact because military rotorcraft is run in the battle environment. Due to the bullet impact, the rapid increase of the internal pressure can cause the internal explosion or fire of fuel cell. It can be a deadly damage on the survivability of crews. Then, fuel cell of military rotorcraft should be designed taking into account the extreme situation. As the design factor of fuel cell, the internal fluid pressure, structural stress and bullet kinetic energy can be considered. The verification test by real object is the best way to obtain these design data. But, it is a big burden due to huge cost and long-term preparation efforts and the failure of verification test can result in serious delay of a entire development plan. Thus, at the early design stage, the various numerical simulations test is needed to reduce the risk of trial-and-error together with prediction of the design data. In the present study, the bullet impact numerical simulation based on SPH(smoothed particle hydrodynamic) is conducted with the commercial package, LS-DYNA. Then, the resulting equivalent stress, internal pressure and bullet's kinetic energy are evaluated in detail to examine the possibility to obtain the configuration design data of the fuel cell.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.23-49
• /
• 2011

The of this study was to establish a theoretical basis for relationship marketing exercised in the mB e-Marketplace and to empirically analyze causal relationship among e-CRM factor, together with quality and the performance of the customer relationship. The population sample of this study was the companies who had experience for using the B2B e-Marketplace, and a data analysis was made through y analysis, factor analysis, multiple regression analysis and hierarchical regression analysis, utilizing statistical package of SPSS 18.0. The result of proving the are as follows; First, the e-CRM factors(e-Marketing, e-Service, e-Sales) of B2B e-Marketplace showed the positive influence on the customer relationship quality factor. the e-CRM factors of B2B e-Marketplace showed the positive influence on the customer relationship performance factor. Third, according to the test result on the relationship between quality factor and performance factor, customer relationship quality factor(satisfaction, trust) had positive effect on performance factor. Last, for the moderating effect of switching barrier in the customer relationship quality factor(satisfaction, trust) on the B2B e-Marketplace and its performance factor(reusing intention, long-term orientation) of maintaining the relation, the subordinate variables of switching barrier(alternative attraction, switching cost) showed the positive moderating effects.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.479-487
• /
• 2020

The purpose of this study is to identify a potential user's need for use and operational of the elderly day care center and to identify the problems and suggest development directions. The data collection was conducted on 320 ordinary people living in J-do through a questionnaire, and sought to understand the operational status of in-depth interview institutions for the heads and employees of six center. As a result of the analysis, a potential user's ware not aware of the functions and specific roles of day care center, the cost of facilities was covered by the government, and that facilities and the environment were important factors when using the center. In-depth interviews show that the current policy or system is far from reality and does not fit the status or role of the workers and the operational status of the agency, requiring the re-establishment of the on-site system. Based on the research results, the development direction of day care facilities requires active promotion and strengthening of family support for improving and enhancing awareness of day care facilities to citizens at the national level. Second, the quality of nursing services should be enhanced through improvements in facilities and the environment that reflect users' needs. Third, The government should improve the quality of nursing services by improving the poor employment conditions and treatment of workers to fit the reality.

• Korean Journal of Health Education and Promotion
• /
• v.31 no.5
• /
• pp.81-95
• /
• 2014

Objectives: The purpose of this study was to apply participatory action-oriented training (PAOT) principle for the management of metabolic syndrome and to assess its effectiveness in the workplace. Methods: The metabolic syndrome management program applying participatory action-oriented training (PAOT) principle is constructed action checklist, Group discussion, self-creation of an action plan, after 3 months, 6 months, 1 year, the practice carried out check up and encourage practice activity. Results: The seventy-seven workers who participated in the metabolic syndrome management program made a total of 246 action plans, 3.8 action plans per person and 234 action plans were achieved after one year, so that 81.0% of action plans have been achieved. After 1 year, in the intervention group, systolic blood pressure (SBP) and diastolic blood pressure (DBP), body mass index (BMI), the risk factors score decreased statistically significant, and metabolic syndrome prevalence decreased 54.8%. whereas the control group also showed a significant decreased in the mean systolic and diastolic blood pressure, the risk factors score. but, low-density lipoprotein (LDL) was significantly increased. Conclusions: To improve the effectiveness of metabolic syndrome management program applying participatory action-oriented training (PAOT) principle, the need to continues implementing programs and analysis of the long-term effects are required. Participatory action-oriented training (PAOT) principle can applying without cost and time, the human burden for the prevention and management of chronic diseases such as metabolic syndrome.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.499-504
• /
• 2005

Polymer concrete shows excellent mechanical properties and chemical resistance compared with conventional normal cement concrete. The polymer concrete Is drawing a strong interest as high-performance materials in the construction industry Resins using recycled PET offer the possibility of a lower source cost of materials for making useful polymer concrete products. Also the recycling of PET in polymer concrete would help solve some of the solid waste problems Posed by plastics and save energy. An objective of this paper is to estimate the damage of sulfuric acid, through investigating recycled PET polymer concrete, immersed at sulfuric acid solution for 84 days. As a result of testing, recycled PET PC, used $CaCO_3$ as filler, makes a problem of appearance and strength if they are exposed for long term at corrosion environment. On the other hand, recycled PET PC, used fly-ash as filler, had less effect on decrease in weight and strength. Recycled PET PC is excellent chemical resistance, resulting in the role of unsaturated polyester resin which consists of polymer chain structure accomplishes bond of aggregates and filler strongly. Also, recycled PET PC, used fly-ash as filler, is stronger resistance of sulfuric acid corrosion than $CaCO_3$, because it is composed of $SiO_2$ and very strong glassy crystal structure. Therefore, recycled PET PC, used fly-ash as filler, is available under corrosion circumstances like sewer pipe or waste disposal plant.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.1
• /
• pp.65-81
• /
• 2004

Foreign direct investment (FDI) by firms has various motives in terms of the strategy for firms' long-term growth. This research uses the case study of Hyundai Motor Manufacturing Alabama to analyze the motives of the Korean auto industry's FDI in the U.S. and the locational factors that determined the selection of the site. This paper starts from the question of why Hyundai made the decision to invest in the U.S., which is not favorable in terms of production cost, especially considering that its exports to the U.S. have been on the increase. The results indicate that the strongest motive for the decision to invest in the U.S. was to ameliorate the trade friction between Korea and the U.S. Given that Hyundai depends on the U.S. market to a large extent for its exports, the foremost motive was to use local production in order to reduce the serious trade imbalance in the automobile sector between Korea and the U.S. in order that trade friction with the U.S. may be avoided and causes for trade disputes may be reduced. Other motives such as improving the access to local consumers were of secondary importance. After the selection of the country in which to invest, however, various factors were considered in the decision regarding the location of the plant, and incentives by local governments ultimately played a key role in this decision. The results imply that the Korean manufacturing industry's investment in the U.S. cannot be explained by traditional FDI theories and instead was greatly driven by a strategic defensive motive. In addition, the results confirm that the design of an appropriate incentive structure by host governments is important for attracting FDI.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.1
• /
• pp.39-48
• /
• 2016

In this study, it can be shortened tunnel construction work period by introducing a single-shell tunnel does not placing the secondary concrete lining, a global research trend, reduction of the cost of the lining placement and number of benefits that can ensure the safety of long-term tunnel with a single shell it was to study the tunnel method. First, we analyze the design and construction practices relating to delete lining of the domestic design and construction practices and a comprehensive analysis of the stability study found a rock in good condition interval (1~3 grades), we propose that the lining uninstalled. In the case of domestic changes on the ground floor is very heavy underfoot conditions many so tunneling method by single shell as ground conditions are good and one preferred the water points that apply in less soil, the soil health and poor sections (4~5 grades) reflecting with respect to the concrete lining that is expected reasonable.

• The Journal of the Korean dental association
• /
• v.49 no.2
• /
• pp.77-84
• /
• 2011

The benefits of implant supported overdenture are readily apparent for the fully edentulous patients and have been well documented, however, there is deficiency of the studies regarding the combination of implants with removable partial dentures for partially edentulous patients. The purpose of this article is to review the literature concerning implants with removable partial dentures and evaluate the evidence for this clinical approach. Through many clinical case reports and studies we have searched from a broad variety of journals, we present the six considerations needed to contemplate respecting implants with removable partial denture in partially edentulous patients. First, the connection between abutment tooth and removable partial denture has to be rigid and the link between implant and removable partial denture should be hinged. Second, a mesial rest acts better in the point of force distribution for distal extension removable partial denture and splinting between implants is also a favorable choice. Third, T bar has an advantage for implants which are used as abutments in distal extension removable partial denture. Forth, as we all known functional impression is better way to reproduce movement for distal extension removable partial denture. Fifth, indirect retainer and guiding plane on the proximal surfaces of terminal abutment teeth are important in preventing denture base lifting. Sixth, implants in conjunction with removable partial denture is superior in the esthetic and phonetic as well as cost-effective point of view. We also suggest that which place we should install implants for force distribution and which diameter and length of implants should be used. in this review article, we recommend to locate the implant near of the abutment tooth for esthetics or near of first molar position for good stress distribution. The diameter and length of implant also influence to stress distribution. When we compare to conservative partial denture, patients go for removable partial denture using implants due to convenience, better support and retention according to several studies. But it is true that we need to study more on this subject and collect long term follow up cases before we discuss on it. So it is enough to bring this subject into the surface of prosthetic treatment by this article.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.133-141
• /
• 2016

Although construction of any new nuclear power projects had not been launched since mid-1970s until recently in the USA, many new nuclear power plants have been constructed in many countries with the support of their governments mainly as part of their national energy security and electric source diversification policies. For many reasons, the nuclear power industry seemed to reclaim their renaissance from the beginning of this century and the investment in the nuclear power projects draw positive concern from the private financial sector. But the global financial crisis in 2008 and subsequent economic slow-down together with tighter bank credit regulations caused commercial banks, the main source of financing, to lose appetite for investing in new nuclear power projects. But the nuclear power economics shows that the nuclear power is viable in terms of the environmental benefit and long-term average cost compared to other power generation sources. Also doubt about nuclear power safety was much mitigated due to technology development and reinforced safety-related tests and monitoring. Therefore, the prospect for nuclear power market expansion remains positive although there are comparatively big differences among different scenarios. After Korea Electric Power Corp. won the UAE nuclear power project in December of 2009, the competition in nuclear power markets is undergoing huge changes. Competitors backed by the support of their own governments are now entering the market with many aggressive and innovative financing packages to win bids of new nuclear power projects. This report analyzed the nuclear power market prospects, competitive edges of nuclear power, risk management measures, and financing challenges and recommends alternative solutions to promote competitive edges in winning bids of new nuclear power projects.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.108-116
• /
• 2015

This study intends to research the spatial characteristics of Asian interim housing that accommodates sufferers pro tempore after disasters. The scope of this research covers the interim spaces used for housing people after natural disasters that occurred in Asia for the past fifteen years. Within this scope, literature review was conducted as the basis to derive the characteristics and environmental elements of interim housing, which provided the criteria to compare and evaluate cases of interim housing along with characteristic elements required of interim housing found in previous studies. According to literature review, interim housing can be classified by life-span, region, economy, climate, type, number of household, square measure, residential cost, structure/material, and service life. Within the scope of the present research, literature review showed a total of twenty-eight cases of interim housing in fifteen countries revealing a high rate of disaster occurrence in the subtropic and tropic climate of Southeast Asia. A great percentage of interim housing was used for long-term stay of over a year. The structure of interim housing varied from lightweight steel, wooden, masonry, membrane, to traditional structure and the type were divided into temporary shelter, transitional housing, temporary housing, and permanent housing. Followed by literature review, the characteristics required of post-disaster interim housing were analyzed based on previous research and case studies. The characteristics of interim housing can be divided into environmental, technological, and socio-cultural ones. Sub-characterical items according to such division include amenity, health, surroundings, structure, convenience, eco-friendliness, safety, communication, and locality. As a result of evaluation, most items met the required characteristics of interim housing, while technological characteristics such as structure and convenience varied with the types of interim housing and appeared even unnecessary in some cases. According to analysis, amenity is maintained through the structural and material characteristics of interim housing and is also facilitated by increasing number of infrastructure such as educational, sanitary, and convenience facilities provided by the governmental and organizational bodies. It is expected that this study will be utilized as preliminary data for follow-up studies that improve the environment of post-disaster interim housing suitable for domestic circumstances in environmental, technological, and socio-cultural respects.