• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.9-14
• /
• 2009

This study was conducted to evaluate the effect of three types of transportation distance (short: less than 40 km; intermediate: 70~80 km; long: 140~150 km) on quality of whole chicken and chicken meat cuts. In whole chicken, $1^+$ grade chicken incidence after transportation of short, intermediate, and long distance transportation was 61.3, 56.3, and 43.8%, respectively. Bruise was not shown in breast and thigh, while wings with bruise after short and long distance transportation were 16.7% and 27.3%, respectively. For chicken meat cuts, $1^+$ grade chicken breast incidence after short distance transportation was 14% higher than that after long distance transportation. Bruised chicken breast after short and long distance transportation were 10 and 12%. Pale, soft, and exudative (PSE) chicken breast incidence after long distance transportation was higher (18.3%) than that after short distance transportation (7.0%). Chicken thigh cuts with $1^+$ grade after short and long distance transportation were shown 91.2% and 88.3%, respectively. Also, chicken wing cuts showed similar result to chicken thigh cuts' and $1^+$ grade incidence of chicken wings after short distance transportation was 11% higher than that of after long distance transportation. These results suggest that shorter transportation distance from farm to slaughter house result in high grade whole chicken and chicken meat cuts.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.361-366
• /
• 2016

Although the permanent magnet linear synchronous motor is a motor useful for transportation systems thanks to its high speed, high acceleration and deceleration, the linear motor generally has armatures installed on the full length of the transport path. It results in the increase in material costs and manufacturing time. As a means to solve this problem a stationary discontinuous armature system is suggested. However, it involves the following two issues. The first issue is it is impossible to control the mover in the section where any armature is not installed as armatures are distributed. The second one is increasing cogging force due to the ends of the armatures. Therefore, this study aims to solve these problems by adjusting intervals between armatures to control the mover anywhere, and to design the interval between armatures optimally to minimize the end cogging force. The suitable distance was deduced. It addressed the problems and showed suitability for long distance transportation PMLSM.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.203-209
• /
• 2024

Objective: This study aimed to assess the impact of the dilution ratio of Tris diluent, storage at 0℃, and long-distance transportation on the spermatozoa of Simmental cattle. It also validated the feasibility of the regional distribution of fresh semen. Methods: In experiment 1, semen was diluted at four dilution ratios (1:6, 1:9, 1:12, and 1:15) to determine the optimal dilution ratio of Tris diluent. In experiment 2, we assessed sperm viability, progressive motility (objectively assessed by computer-assisted sperm analyzer), and acrosome intactness in Tris dilutions kept at constant 0℃ for 1, 3, 6, 9, and 12 days. We compared them to Tianshan livestock dilutions (Commercial diluent). In experiment 3, semen was diluted using Tris diluent, and sperm quality was measured before and after long-distance transport. Artificial insemination of 177 Simmental heifers compared to 156 using Tianshan Livestock dilution. Results: The outcomes demonstrated that 1:9 was the ideal Tris diluent dilution ratio. The sperm viability, Progressive Motility, and acrosome integrity of both Tris and Tianshan dilutions preserved at 0℃ gradually decreased over time. sperm viability was above 50% for both dilutions on d 9, with a flat rate of decline. The decrease in acrosome integrity rate was faster for Tianshan livestock dilutions than for Tris dilutions when stored at 0℃ for 1 to 6 days. There was no significant difference (p>0.05) in sperm viability between semen preserved in Tris diluent after long-distance transportation and semen preserved in resting condition. The conception rates for Tris dilution and Tianshan livestock dilution were 49.15% and 46.15% respectively, with no significant difference (p>0.05). Conclusion: This shows that Tris diluent is a good long-term protectant. It has been observed that fresh semen can be successfully preserved for long-distance transport when stored under 0℃ conditions. Additionally, it is feasible to distribute semen regionally.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.334-342
• /
• 1998

In this experimental study, methanol was chosen as a system material for a long -distance heat transportation. Not only transition metals but also noble metals were investigated as an active component, and several metal oxides, such as ${\gamma}$-$Al_2$,$O_3$, $SiO_2$, etc. as a support. In general, transition metal catalysts absorbed more heat than noble metal catalysts. The amount of heat absorption and CO selectivity depends on temperature and methanol partial pressure, and 25$0^{\circ}C$ Ni/$SiO_2$ catalyst showed the best result for methanol decomposition reaction.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1028-1034
• /
• 2003

The objectives of this paper are to study the effect of key parameters on the cycle performance and capacity and to estimate the cost of latent and sensible energy transportation systems. The overall conductance (UA) of each component, the ambient temperature and the absorber inlet temperature are considered the key parameters. It is concluded that COP of the solution transportation using an absorption system (STA) at ambient temperature is 10% higher than that of the conventional sensible system. It is also found that the cost of STA system can be reduced 7.5 times to that of sensible energy transportation for one year of operation with 10 km transportation distance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.6
• /
• pp.506-513
• /
• 2004

The objective of this paper is to evaluate the economic performance of latent and sensible energy transportation systems. LCC (Life-Cycle Cost) analysis is a practical method and a guideline for evaluating the economic performance of considered systems during the Life-Cycle Period. By comparing the LCC of alternatives, The most ideal alternative is determined which has the lowest LCC. It is concluded that the cost of STA (Solution Transportation Absorption system) can be reduced by 67% to that of sensible energy transportation for study period with 10 km transportation distance.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.32-42
• /
• 2000

In this paper, we outlines the basic pricing rules that developed over the years, and illustrates how these rules apply in practice using railway fare, price discrimination in railway travel. we review the problems of rail fare system reflecting the market fare decision and consider fare decision structure and relative fare comparison with other modes of transportation. Specifically, we focus on tile effect of tile “fare varying system with distance”, using the characteristics of long distance transportation modes. And set up the framework for reasonable fare decision under the current circumstances.

• Korean Management Science Review
• /
• v.28 no.3
• /
• pp.1-13
• /
• 2011

Hub-and-spoke transportation network is a powerful and useful network structure that takes full advantage of economies of scale on routes between hubs. In recent studies, the network structure is extended to hybrid hub-andspoke that allows direct transportation between spokes. In this study, we considered more extended network structure which is called hybrid multiple hub-and-spoke that has multiple hubs and allows direct transportation between spokes. We developed a mathematical optimization model for automotive service parts transportation planning under hybrid multiple hub-and-spoke network structure. The model suggests a long-term transportation route planning and a short-term vehicle assignment planning. The model is verified by simulation and validated in real world application to Hyundai Mobis automotive service parts transportation planning. From the simulation result, the model reduced the transportation cost about 24.7%, the total distance about 6.8% and the CO2 emissions about 8.8%. In real world application for 6 months from July to December 2010, the model reduced the transportation cost about 9.1% by changing the long-term transportation route without daily vehicle assignment planning.

• Ocean and Polar Research
• /
• v.40 no.3
• /
• pp.161-167
• /
• 2018

We examined the effect of salinity and water temperature on hatching and survival rates of fertilized eggs of hybrid grouper (Epinephelus fuscoguttatus ♀ ${\times}$ E. lanceolatus ♂) at different developmental stages, determining optimal conditions for their long-distance transportation. Deformities and hatching rates of fertilized grouper eggs were observed at salinities of 24, 27, 30, 33, 36, and 39 psu. The optimal salinity was determined to be 36 psu, with a survival rate of $70.0{\pm}2.0%$. Transportation experiments at 36 psu were conducted at water temperatures of 21, 24, 27, and $30^{\circ}C$, different developmental stages such as morula, 5-myomere, and tail beating for hatching and survival rates. The optimal water temperature and developmental stage for transporatation were $30^{\circ}C$ and tail beating stage and those hatching rates were $50.6{\pm}1.9%$ and $86.3{\pm}1.3%$, respectively. At $21^{\circ}C$, the survival rate by transportation water temperature was highest ($73.1{\pm}10.6%$), but the hatching rate ($17.1{\pm}3.1%$) was lowest. Therefore, the hybrid grouper fertilized eggs (E. fuscoguttatus ♀ ${\times}$ E. lanceolatus ♂) can be most efficiently produced under long-distance transportation conditions during the tail beating stage and at a water temperature of $30^{\circ}C$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.333-339
• /
• 2015

Fish exportation using airplanes incurs sizable logistics costs (12,000KRW/kg), according for more than 45% out of the total export cost. Thus, it is unreasonable to quantitatively expand fish exportation by means of air transport. In addition, cases of failing to deliver fish at the right time to the right place occurs frequently due to the limited cargo capacity and insufficient cargo space of airplanes, especially during the peak season. Therefor, a technology that not only minimizes the logistics costs but also transports fish freshly and safely, in the case of long distance exportation to countries such as the United States and Taiwan, should be developed. In this study, a live fish container control system for long distance transportation was designed and implemented. Live flatfish (2,000kg) were selected as the target fish, were transported to the United States to analyze and verify the performance of the a live fish container control ystem and transportation ability.