• Journal of Mechanical Science and Technology
• /
• v.20 no.7
• /
• pp.1019-1029
• /
• 2006

The ballistic range has long been employed in a variety of engineering fields such as high-velocity impact engineering, projectile aerodynamics, creation of new materials, etc, since it can create an extremely high-pressure state in very short time. Of many different types of ballistic ranges developed to date, two-stage light gas gun is being employed most extensively. In the present study, a theoretical work has been made to develop a new type of ballistic range which can easily simulate a flying projectile. The present ballistic range consists of high-pressure tube, piston, pump tube, shock tube and launch tube. The effect of adding a shock tube in between the pump tube and launch tube is investigated. This improvement is identified as the reduction in pressures in the high pressure tube and pump tube while maintaining the projectile velocity. Equations of motions of piston and projectile are solved using Runge-Kutta methods. Dependence of projectile velocity on various design factors such as high pressure tube pressure, piston mass, projectile mass, area ratio of pump tube to launch tube and type of driver gas in the pump tube are also analyzed. Effect of various gas combinations is also investigated. Calculations show that projectile velocities of the order 8 km/sec could be achieved with the present ballistic range.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.31.1-31.1
• /
• 2017

Spiral structure in disk galaxies is modeled with ncollisionless N-body simulations including live disks, halos, and bulges with a range of masses. Two of these simulations make long-lasting and strong two-arm spiral wave modes that last for about 5 Gyr with constant pattern speed. These two had a light stellar disk and the largest values of the Toomre Q parameter in the inner region at the time the spirals formed, suggesting the presence of a Q-barrier to wave propagation resulting from the bulge. The relative bulge mass in these cases is about 10%. Models with weak two-arm spirals had pattern speeds that followed the radial dependence of the Inner Lindblad Resonance. In addition to these, we also report a few more cases where two-armed spirals are developed and are maintained for a several rotation time scales.

• Journal of muscle and joint health
• /
• v.7 no.2
• /
• pp.241-257
• /
• 2000

Rheumatoid arthritis as one of the chronic illness requiring management in long period of time puts great burden to patients, their family and society. For patients with chronic illnesses, providing a social support is important and the most important source comes from spouses. Therefore we assessed burden of husbands of female rheumatoid arthritic patients and also found out the factors affecting burden. The sample of study was 107 female rheumatoid arthritic patients and their spouses. The tool of assessing spouses' burden was the revised version of subjective and objective parameters developed by Montgomery et al.(1985). The results are as follows: 1. General characteristics of patients and spouses: The mean age of the patients was 48 years. Educational level of patients was high school 41.1%. The mean age of the spouses was 51years. Educational level of spouses was mostly high school(40.2%) and college(29.9%) graduate. The mean marital period was 23.4years. Average income per month was 1,609,000 won. The average duration since diagnosis was 9.4years. As a therapy, 67.3% chose standard drug therapy. Average rating of discomfort by patient was 3.05(range 1-5) and that of severity was 3.48 and that of dependency was 2.58. The husband's rating of their spouses disease severity was 3.68. 2. Husbands' burden: The average burden in subjective items was 21.61(range 6-36) and objective items was 35.24(range 10-60). The average of total burden was 56.59(range 16-96). 3. Husband's total burden correlated with patient's age, educational level of patients, therapy method, patient's level of discomfort, patient's severity, patient's level of dependence, husband's recognition of level of severity in statistical level. Husband's objective burden correlated with patient's age, educational level of patient, patient's level of discomfort, husband's recognition of level of severity. Husband's subjective burden correlated with patient's age, educational level of patients, therapy method, patient's severity, patient's level of dependence, husband's recognition of level of severity. 4. Linear correlation analysis on burden: The husbands' total burden is explained in 37 7% by husband's recognition of level of severity and husband's age. The husbands' objective burden is explained in 31.2% by patient's level of dependence, husband's age, husband's recognition of level of severity. The husbands' subjective burden is explained in 26.7% by husband's recognition of level of severity and patient's age. In conclusion, husbands' level of burden is affected by many factors and therefore nursing strategy for relieving burden of middle aged husbands should be individualized taking these factors into consideration.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.367-370
• /
• 2006

The ballistic range has long been employed in a variety of engineering fields such as high-velocity impact engineering, projectile aerodynamics, creation of new materials, etc, since it can create an extremely high-pressure state in very short time. Two-stage light gas gun is being employed most extensively. The present experimental study has been conducted to develop a new type of ballistic range which can easily perform a projectile simulation. The ballistic range consists of a high-pressure tube, piston, pump tube, shock tube and launch tube. The experiment is conducted to find out the dependence of various parameters on the projectile velocity. The pressure in high-pressure tube, pressure of diaphragm rupture and projectile mass are varied to obtain various projectile velocities. This study also addresses the effect of the presence of a shock tube located between the pump tube and launch tube on system study. The experimental results are compared with those obtained through an author's theoretical study.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.366-371
• /
• 1995

High performance magnetic materials are characterized by the combination of outstanding magnetic properties and optimized microstructures, e.g., nanocrystalline composites of multilayers and small particle systems. The characteristic parameters of the hysteresis loops of these materials vary over more than a factor of $10^{6}$ with optimum values for the coercive field of several Tesla and permeabilities of $10^{6}$. Within the framework of the computational micromagnetism (nanomagnetism) using the finite element method the upper and lower bounds of the coercive field of different types of grain ensembles and multilayers have been determined. For the case of nanocrystalline composites the role of grain size, exchange and dipolar coupling between grains and the degree of grain alignment will be discusses in detail. It is shown that the largest coercivities are obtained for exchange decoupled grains, whereas remanence enhancing requires exchange coupled grains below 20 nm. For composite permanent magnets based on $Nd_{2}Fe_{14}B$ with an amount of ~ 50% soft $\alpha$-Fe-phase coercivities of ${\mu}_{0}H_{c}=0.75\;T$, a remanence of 1.5 T and an energy product of $400\;kJ/m^{3}$ is expected. In nanocrystalline systems the temperature dependence of the coercivity is well described by the relation ${\mu}_{0}H_{c}=(2\;K_{1}/M_{s}){\alpha}-N_{eff}{\mu}_{0}M_{s}$, where the microstructural parameters $\alpha$ and $N_{eff}$ take care of the short-range perturbations of the anisotropy and $N_{eff}$ is related to the long-range dipolar interactions. $N_{eff}$ is found to follow a logarithmic grain size size dependence ${\mu}_{0}H_{c}=(2\;K_{1}/M_{s}){\alpha}-N_{eff}(\beta1nD){\mu}_{0}M_{s}$. Several trends how to achieve the ideal situation $\alpha$->1 and $N_{eff}$->1->0 will be discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.263-266
• /
• 2007

The ballistic range has long been employed in a variety of engineering fields such as high-velocity impact engineering, projectile aerodynamics, creation of new materials since it can create an extremely high-pressure state in very short time. Two-stage light gas gun is being employed most extensively. The present experimental study has been conducted to develop a new type of ballistic range which can easily perform a projectile simulation. The experiment is conducted to find out the dependence of various parameters on the projectile velocity. The pressure in high-pressure tube, pressure of diaphragm rupture and projectile mass and piston mass are varied to obtain various projectile velocities. The flow field is visualized to see flow around projectile.

• Journal of Photoscience
• /
• v.2 no.2
• /
• pp.69-72
• /
• 1995

Dry orderly oriented purple membrane from Halobacterium halobium was obtained by a new technique of preparation. This oriented purple membrane film was very stable, nearly permanently, and showed long term reproducibility with respect to its photochemical behavior. In addition, we have investigated the photooptical properties in terms of the M$_{412}$ intermediate of the bacteriorhodopsin photocycle with respect to the humidity of the film. The relative optical density, i.e. its apparent concentration of the M$_{412}$ intermediate was decreased with the humidity increase as a function of the intensity of the exciting flash within our experimental range. It is suggested that the bound water molecules play an important role in the structure of the bacteriorhodopsin.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.435-440
• /
• 2001

This study investigates the rheological properties of in-situ polymerized solutions of polyacrylonitrile(PAN) and acrylonitrile(AN) -itaconic acid(IA) in dimethyl sulfoxide(DMSO) in terms of temperature, concentration, and time. The complex viscosity and storage modulus of the solutions were generally increased with elapsing time, which is ascribable to the three-dimensional pseudostructures formed by strong inter- or Intra-molecular attractions through Polar -CN and -COOH groups. The three-dimensional pseudonetworks would lead to relation of the acrylic solutions in long term. This was more noticeable at higher temperature within the temperature range examined. In the case of 20% solutions one can not observe lower Newtonian flow region in the viscosity curve. Disappearance of lower Newtonian flow region is indicative of heterogeneity of the solution system. Casson Plot of the viscosity data revealed that 20% solutions of PAN and AN-IA copolymer in DMSO clearly demonstrated positive yield stress, ascertaining formation of pseudostructures in the solution systems.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.77-77
• /
• 2001

This study investigates the rheological properties of in-situ polymerized solutions of polyacrylonitrile(PAN) and acrylonitrile(AN)-itaconic acid(IA) in dimethyl sulfoxide(DMSO) in terms of temperature, concentration, and time. The complex viscosity and storage modulus of the solutions were generally increased with elapsing time, which is ascribable to the three-dimensional pseudostructures formed by strong inter- or intra-molecular attractions through Polar -CN and -COOH groups. The three-dimensional pseudonetworks would lead to gelation of the acrylic solutions in long term. This was more noticeable at higher temperature within the temperature range examined. In the case of 20% solutions one can not observe lower Newtonian flow region in the viscosity curve. Disappearance of lower Newtonian flow region is indicative of heterogeneity of the solution system. Casson Plot of the viscosity data revealed that 20% solutions of PAN and AN-IA copolymer in DMSO clearly demonstrated positive yield stress, ascertaining formation of pseudostructures in the solution systems.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.227-231
• /
• 2009

New polyelectrolytes derived from poly(amide-sulfone)s and 1,5-dibromopentane were simultaneously fabricated on the electrode by the crosslinking reaction. The substrate was pretreated with a bromoalkyl-containing, silane-coupling agent to anchor the humidity-sensitive membrane to the substrate through the covalent bond. When the resistance dependence on the relative humidity of the crosslinked poly(amide-sulfone)s was measured, the resistance varied by three orders of magnitude between 20%RH and 90%RH, which was the required RH range for a humidity sensor operating at ambient humidity. Their water durability, long-term stabilities under various environments, hysteresis and response and recovery times were measured and evaluated as a humidity-sensing membrane.