• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.405-409
• /
• 2009

본 논문에서는 LLR (Log-Likelihood Ratio) 근사화가 LDPC (Low-Density Parity Check) 복호기의 성능에 미치는 영향을 분석하였으며, 이를 통해 LDPC 복호기의 최적 설계조건을 도출하였다. LLR 합-곱 (LLR sum-product) LDPC 복호 알고리듬을 근사화시킨 최소합 알고리듬 (Min-Sum Algorithm; MSA)을 Matlab으로 모델링한 후, 시뮬레이션을 통해 근사화 비트 폭과 최대 반복 복호 횟수에 따른 비트오율 (BER) 성능을 분석하였다. 모델링된 LDPC 복호기는 IEEE 802.11n 표준에 제안된 블록길이 1,944비트, 부호화율 1/2인 패리티 검사 행렬을 사용하였으며, QPSK 변조와 백색 가우시안 잡음채널 하에서 시뮬레이션 하였다. LLR 근사화에 따른 비트오율 성능을 분석한 결과, LLR 비트 폭은 (7,5)이고 반복복호 횟수는 7인 경우에 비트오률 성능이 가장 우수함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.690-693
• /
• 2005

In this paper, probabilistic distribution of fatigue life of chassis component is determined statistically by applying the design of experiments and the Pearson system. To construct $p-\varepsilon-N$ curve, the case that fatigue data are random variables is attempted. Probabilistic density function(p.d.f) for fatigue life is obtained by design of experiment and using this p.d.f fatigue reliability about any aimed fatigue life can be calculated. Lower control arm and rear torsion bar of chassis component are selected as examples for analysis. Component load histories, which are obtained by multi-body dynamic simulation for Belsian load history, are used. Finite element analysis are performed using commercial software MSC Nastran and fatigue analysis are performed using FE Fatigue. When strain-life curve itself is random variable, probability density function of fatigue life has very little difference from log-normal distribution. And the case of fatigue data are random variables, probability density functions are approximated to Beta distribution. Each p.d.f is verified by Monte-Carlo simulation.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.110-117
• /
• 2007

In this paper, probabilistic distribution of chassis component fatigue life is determined statistically by applying the design of experiments and the Pearson system. To construct p - ${\varepsilon}$ - N curve, the case that fatigue data are random variables is attempted. Probabilistic density function (p.d.f) for fatigue life is obtained by the design of experiment and using this p.d.f fatigue reliability, any aimed fatigue life can be calculated. Lower control arm and rear torsion bar of chassis components are selected as examples for analysis. Component load histories which are obtained by multi-body dynamic simulation for Belsian load history are used. Finite element analysis is performed by using commercial software MSC Nastran and fatigue analysis is performed by using FE Fatigue. When strain-life curve itself is random variable, the probability density function of fatigue life has very little difference from log-normal distribution. And the cases of fatigue data are random variables, probability density functions are approximated to Beta distribution. Each p.d.f is verified by Monte-Carlo simulation.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.33.2-33.2
• /
• 2009

Diffuse ionized gas (DIG or warm ionized medium, WIM) outside traditional regions is a major component of the interstellar medium (ISM) not only in our Galaxy, but also in other galaxies. It is generally believed that major fraction of the Halpha emission in the DIG is provided by OB stars. In the "standard" photoionization models, the Lyman continuum photons escaping from bright H II regions is the dominant source responsible for ionizing the DIG. Then, a complex density structure must provide the low-density paths that allow the photons to traverse kiloparsec scales and ionize the gas far from the OB stars not only at large heights above the midplane, but also within a galactic plane. Here, I present Monte-Carlo models to examine the propagation of the ionizing radiation leaked out of traditional H II regions into the diffuse ISM applied to two face-on spirals M 51 and NGC 7424. We find that the "standard" scenario requires absorption too unrealistically small to be believed, but the obtained scale-height of the galactic disk is consistent with those of edge-on galaxies. We also report that the probability density functions of the Halpha intensities of the DIG and H II regions in the galaxies are log-normal, indicating the turbulence property of the ISM.

• 지질공학
• /
• 제18권2호
• /
• pp.137-144
• /
• 2008

강원대학교 구내에 설치된 4개의 보정시험공에서 플라스틱재질의 원통 및 반원통 케이싱을 이용한 이격오차 실험을 수행하였다. 이격실험 자료에 spine and ribs 기법을 적용한 결과 케이싱 두께 및 유형에 관계없이 하나의 밀도모델에서는 하나의 이격선이 얻어졌으며 그 기울기는 모델지층의 밀도에 비례하는 것으로 나타났다. 이러한 이격특성을 이용하여 플라스틱 케이싱이 설치된 NX시추공에서의 효과적인 밀도보정 방안이 제시되었다.

• Bulletin of the Korean Chemical Society
• /
• 제20권10호
• /
• pp.1177-1180
• /
• 1999

The ab initio SCF MO and density functional theory (DFT) studies are carried out on the electrophilic (1a) and electron transfer (1b) addition reactions to the vinyl double bond of aryl vinyl sulfides and ethers. In the electrophilic addition processes, a double bond shift from C3 = C4 to X = C3 occurs with occupation number (1.97) close to the normal two. Due to this shift direct conjugation between the cationic center, X = S or O, and the para electron-donor substituent becomes impossible so that the reaction energies (or log K) are correlated with σ rather than σ+. By contrast, radical cation formation leads to delocalization of the SOMO, a lone-pair πorbital on X, with four major resonance structures in which cationic charge as well as spin density is delocalized over C4 , X and C7 atoms. As a result, partial πbonds are formed over C1 -X and C3 - C4 with occupation numbers (0.82) lower than one. In two of the cannonical structures, III(Ⅹ) and III(X+), direct conjugation between the cationic center, X, and the para substituent is achieved so that a better correlation with σ+ rather than σis obtained. The SCF MO energies at the HF/3-21G* and HF/6-31G* levels lead to very much inferior Hammett correlations in the σ/ σ+ diagnostic criterion. In contrast, the ρvalues evaluated with the DFT energies can give reliable diagnostic distinction between the two addition mechanisms.

• ETRI Journal
• /
• 제46권3호
• /
• pp.485-500
• /
• 2024

A hardware architecture is presented to decode (N, K) polar codes based on a low-density parity-check code-like decoding method. By applying suitable pruning techniques to the dense graph of the polar code, the decoder architectures are optimized using fewer check nodes (CN) and variable nodes (VN). Pipelining is introduced in the CN and VN architectures, reducing the critical path delay. Latency is reduced further by a fully parallelized, single-stage architecture compared with the log N stages in the conventional belief propagation (BP) decoder. The designed decoder for short-to-intermediate code lengths was implemented using the Virtex-7 field-programmable gate array (FPGA). It achieved a throughput of 2.44 Gbps, which is four times and 1.4 times higher than those of the fast-simplified successive cancellation and combinational decoders, respectively. The proposed decoder for the (1024, 512) polar code yielded a negligible bit error rate of 10^-4 at 2.7 E_b/N_o (dB). It converged faster than the BP decoding scheme on a dense parity-check matrix. Moreover, the proposed decoder is also implemented using the Xilinx ultra-scale FPGA and verified with the fifth generation new radio physical downlink control channel specification. The superior error-correcting performance and better hardware efficiency makes our decoder a suitable alternative to the successive cancellation list decoders used in 5G wireless communication.

• 한국IT서비스학회지
• /
• 제17권1호
• /
• pp.91-103
• /
• 2018

This study developed a prediction model using machine learning technology and predicted the success of health consulting by using life log data generated through u-Health service. The model index of the Random Forest model was the highest using. As a result of analyzing the Random Forest model, blood pressure was the most influential factor in the success or failure of metabolic syndrome in the subjects of u-Health service, followed by triglycerides, body weight, blood sugar, high cholesterol, and medication appear. muscular, basal metabolic rate and high-density lipoprotein cholesterol were increased; waist circumference, Blood sugar and triglyceride were decreased. Further, biometrics and health behavior improved. After nine months of u-health services, the number of subjects with four or more factors for metabolic syndrome decreased by 28.6%; 3.7% of regular drinkers stopped drinking; 23.2% of subjects who rarely exercised began to exercise twice a week or more; and 20.0% of smokers stopped smoking. If the predictive model developed in this study is linked with CBR, it can be used as case study data of CBR with high probability of success in the prediction model to improve the compliance of the subject and to improve the qualitative effect of counseling for the improvement of the metabolic syndrome.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.57-64
• /
• 1999

The electrical conductivity of TiO$_2$ doped with 0.05~1.5mol% WO$_3$ was measured in the oxygen partial pressure range of 10\ulcorner~10\ulcorner atm and temperature range of 1100~130$0^{\circ}C$ to investigate the defect types and the electrical properties. The grain size and density were increased as the liquid phase was formed by the doped WO$_3$. The secondary phase and WO$_3$peaks at the sample doped up to 4.0 mol% were not detected from the XRD results. The data(log$\sigma$/logPo$_2$) over 110$0^{\circ}C$ were divided into the four regions. From these experimental results, we proposed the following defect regions. 1) Magneli phase(extended defect), 2) Reduced rutile region which is similar to the behavior of undoped rutile, 3) Nearly stoichiometric Ti\ulcornerW\ulcornerO$_2$region in which extra charge of W\ulcorner cation is expected to be compensated by an electron, 4) Overstoichiometric Ti\ulcornerW\ulcornerO\ulcorner region which is a metal deficiency not to be observed in pure TiO$_2$. The electrical conductivity of w-doped TiO$_2$ was influenced by the measuring temperature, oxygen partial pressure, and the dopig content.

• The Plant Pathology Journal
• /
• 제28권1호
• /
• pp.1-9
• /
• 2012

In this study, 200 isolates of fluorescent pseudomonads were isolated from different fields of East and West Azarbaijan and Ardebil provinces of Iran. These bacterial isolates were screened on the basis of a dual culture assay, the presence of known antibiotic genes, and their ability to successfully colonize roots and to promote plant growth. Twelve isolates exhibited 30% or more inhibition of mycelia growth of $P.$ $drechsleri$. Genes encoding production of the antibiotics 2,4-diacetylphloroglucinol, phenazine-1-carboxylic acid, and pyoluteorin were detected in some strains but none of the strains possessed the coding gene for production of antibiotic pyrrolnitrin. In an $in$ $vitro$ test for root colonization, the population density on roots of plants treated with most of the above strains was more than 6 $\log_{10}$ CFU $g^{-1}$ roots, with a maximum of 7.99 $\log_{10}$ CFU $g^{-1}$ roots for strain 58A. Most of the strains promoted significant plant growth in comparison to non-treated controls. In green house studies, the percentage of healthy plants in pots treated with strains 58A and 8B was 90.8% and 88.7%, respectively. The difference between these treatments and treatment with the fungicide metalaxyl was not significant.