• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1605-1607
• /
• 2000

In this paper, the design of class AB BiCMOS log-domain filter for low-voltage and low-power was proposed. This filter is consist of a log-domain integrator using folded junctions with capacitor connected to emitter and it's class AB structure. A comparison between the proposed class AB BiCMOS log-domain filter and classical class A BiCMOS log-domain filter is drawn on the basis of SNR, THD and the frequency response. This comparison shows proposed filter are more than good SNR, THD and frequency characteristics than more class A log-domain filter for low voltage and low power.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.603-606
• /
• 2006

In this study, we proposed a Modified Log-Periodic Tooth antenna structure with reflector for millimeter wave image sensor of PMMW(Passive Millimeter Wave). PMMW image sensor satisfy the requirements, such as, High Gain, Wideband, and Planar antenna structure.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.16-21
• /
• 1984

The relative Arrhenius parameters for t-butoxy radical decomposition (log $A_d$, $E_d$) and hydrogen abstraction of t-butoxy radical from hydrogen donor (log $A_d$, $E_d$) by competitive method were obtained as follows: for cyclohexane; log $A_a/A_d$ = -4.17 mole/l and $E_d-E_a$ = 9.01 kcal/mole, for isobutane; log $A_a/A_d$ = -5.70 mole/l and $E_e-E_a$= 11.0 kcal/mole. From the reported Arrhenius parameters for t-Butoxy radical decomposition reactions the parameters for t-Butoxy radical reactions with isobutane and cyclohexane are estimated to be log $A(l/mol{\cdot}sec)$ = 8.4, $E_a$ = 4.3 kcal/mol and $log A (l/mol{\cdot}sec)= 9.9,\;E_a$ = 6.3 kcal/mol, respectively.

• Journal of the Korean Mathematical Society
• /
• v.45 no.2
• /
• pp.467-477
• /
• 2008

In this paper, we provide a criterion for Chow stability in terms of log canonical threshold of the Chow form in the Grassmannian.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.12.2-12
• /
• 2001

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.281-290
• /
• 2015

Log density data were collected and compared with the core density data throughout the southern Korean Peninsula. The comparison reveals that the log densities obtained from gamma-gamma log are much lower than the core densities obtained from laboratory density measurement of core samples. The anomalously low log densities can be attributed to the small-source density log data. Correlation analysis reveals differences between densities derived from the two methods, indicating that a data quality problem arises when using small-source log data. The problem is probably due to the fact that small-source data have not been obtained under ideal conditions for maintaining the appropriate relationship between gamma response and formation density. The frequency distribution characteristics of formation density in the southern Korean Peninsula could be determined using the core and the standard-source log data which are well-correlated.

• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.48-59
• /
• 2018

Recently, network technology has been used in various fields due to development of network technology. However, there has been an increase in the number of attacks targeting public institutions and companies by exploiting the evolving network technology. Meanwhile, the existing network intrusion detection system takes much time to process logs as the amount of network log increases. Therefore, in this paper, we propose a Spark-based network log analysis system that detects unstructured network attack pattern. by using Snort. The proposed system extracts and analyzes the elements required for network attack pattern detection from large amount of network log data. For the analysis, we propose a rule to detect network attack patterns for Port Scanning, Host Scanning, DDoS, and worm activity, and can detect real attack pattern well by applying it to real log data. Finally, we show from our performance evaluation that the proposed Spark-based log analysis system is more than two times better on log data processing performance than the Hadoop-based system.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.5
• /
• pp.355-360
• /
• 2005

The purpose of the present study was to evaluate the bioequivalence of two cetirizine HCl tablets, Zyrtec tablet (UCB Pharm. Co., Ltd. Korea, reference product) and Zyrix tablet (Kukje Pharm. Co., Ltd., Korea, test product), according to the guidelines of Korea Food and Drug Administration (KFDA). After adding an internal standard (diazepam), plasma samples were extracted using 1 mL of dichloromethane. Compounds extracted were analyzed by reverse-phase HPLC with ultra-violet detector. This method for determination cetirizine is proved accurate and reproducible with a limit of quantitation of 10 ng/mL in male plasma. Twenty-four healthy male Korean volunteers received each medicine at the cetirizine HCl dose of 10 mg in a $2{\times}2$ crossover study. There was a one-week wash out period between the doses. Plasma concentrations of cetirizine were monitored for over a period of 24 hr after the administration. AUC (the area under the plasma concentration-time curve) was calculated by the linear trapezoidal rule. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed AUC and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals for the log transformed data were acceptable range of log 0.8 to log 1.25 $(e.g.,\;log\;0.93-log\;1.08\;for\;AUC_{0-t},\;log\;0.91-log\;1.08\;for\;AUC_{0-{\infty}}\;and\;log\;1.01-log\;1.11\;for\;C_{max})$. The major parameters, AUC and $C_{max}$ met the criteria of KFDA for bioequivalence indicating that Zyrix tablet is bioequivalent to Zyrtec tablet.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.79-88
• /
• 2005

This research studied the utilization of the bed log wastes as a papermaking grade pulp. Five different bed log samples from shiitake mushroom (Lentinus edodes (Berk.) Sing) cultivation were collected by the cultivating periods of 1 to 5 years. The wood chemical composition and the characteristics of kraft pulping of each sample were investigated. The results of chemical composition showed that the rate of carbohydrate (glucose and xylose) content in sapwood was decreased as the cultivation period was increased. In heartwood, there was no significant difference. The screening yield of non-cultivated bed log from kraft pulping was higher than that of cultivated one, but the reject of cultivated one, especially for 5 year-cultivated, was lower than non-cultivated bed log. The fiber length and width was continuously decreased as the cultivation period was increased. Therefore, the freeness of the pulp from the cultivated bed log was sharply decreased comparing to non-cultivated due to the fiber cutting and the increased fine content. The dry strengths were increased according to the increasing addition level of bed log kraft pulp to KOCC and non-cultivated wood pulp. From the overall results, the pulp from 5 years cultivated bed log can be reasonably used if it is mixed with long fiber pulp for advantages such as reducing beating time.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.218-225
• /
• 1995

In this paper, a mechanical analysis model for steep-slope log-skidding operations of a rubber-tired tractor is discussed and the applicability of the model is investigated. The model largely consists of mathematical analysis models for log drag, dynamic vehicle weight distributions and soil-vehicle traction. For the case study, a theoretical data set for log skidding operations is used in investigating the effect of the factors influencing the results of mechanical analysis or the productivity of skidding operations. The analyses include 1) the effect of log choking methods on tangential log-skidding force, 2) the effects of the change in travel speed and log load on the required input power to the wheels and 3) the log skidding performance of a two-wheel drive compared with that of a four-wheel drive.