• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.44-48
• /
• 2005

Experimental works were carried out to evaluate the service life of low pressure LPG regulators for domestic use. Experimental results showed that the operating pressure of regulators used for 7 years notably deviated from the standard value of the adjusting pressure and the lock-up pressure. Thus, it is estimated that low pressure LPG regulators have approximately 6 years of service life.

• Wind and Structures
• /
• v.30 no.1
• /
• pp.37-54
• /
• 2020

To investigate the motion-induced aeroelastic effects (or aerodynamic feedback effects) on a square cylinder in uniform flow, a series of wind tunnel tests involving the pressure measurement of a rigid model (RM) and simultaneous measurement of the pressure and vibration of an aeroelastic model (AM) have been systematically carried out. More specifically, the aerodynamic feedback effects on the structural responses, on the mean and root-mean-square wind pressures, on the power spectra and coherence functions of wind pressures at selected locations, and on the aerodynamic forces were investigated. The results indicated the vibration in the lock-in range made the shedding vortex more coherent and better organized, and hence presented unfavorable wind-induced effects on the structure. Whereas the vibration in the non-lock-in range generally showed insignificant effects on the flow structures surrounding the square cylinder.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.114-123
• /
• 1993

In is well known that a cyclic Karman vortex street is thrown out periodically from cylinder whose axis is vertical to the bulk flow. When the cylinder is vibrating in the frequency close to that of Karman vortex street, the vortex shedding frequency is locked onto that of cylinder. While there are many experimental studies for this phenomenon compared with analytical studies by numerical calculation, are very limited. In this study, a new algorithm for moving boundary is proposed and a simulator is develoed, which can deal with this phenomenon with experimental studies.

• World Technopolis Review
• /
• v.3 no.2
• /
• pp.66-77
• /
• 2014

This paper aims at exploring a conceptual framework of analyzing the evolutionary processes of regional economies by reconciling the notion of regional resilience and the concepts prevailing in the disciplines of evolutionary economics and geography. The resilience framework appears to offer a promising outlet with which combination of the seemingly contradictory conceptions is made possible. It can address why some regions manage to adapt to external shocks, renew themselves, or lock out themselves, while others are more locked in decline. In addition, it can also explain how the spatial organization of economic production, distribution, and consumption is transformed over time. Then, regional economic resilience, together with its accompanying vehicle of panarchy, emerges as a workable framework of explaining regional differentiation in regional economic performance and trajectories. Despite the risk of being a fuzzy concept, the resilience conception can be properly operationalized to provide policy principles of regional economic innovation adjusted to region-specific contexts.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2083-2088
• /
• 2010

It is necessary to carry out quantitative analysis for the ABS hydraulic modulator to upgrade the system performances. Mathematical modeling method for the ABS hydraulic modulator, is suggested in the view of electromagnetism and fluid mechanics. Also, an analytic method is proposed for the resultant forces of electromagnetism and hydraulic pressure generated in the real vehicle ABS. The relationships between the design factor of Inlet & outlet solenoid valve and the system performance of ABS, are investigated through the analytical precess.

• Journal of Technology Innovation
• /
• v.15 no.2
• /
• pp.61-81
• /
• 2007

A typical small firm in consumer goods sectors of developing countries is an OEM supplier to big MNCs. Lacking design and marketing capability, a small firm relies on the MNCs for survival but their long term growth is not guaranteed as the MNCs are always looking for, and ready to relocate to, cheaper production sites. In this light, we can say that there is something like "OEM trap" from which most firms from LDCs find difficult to move out (Lee 2005). In this situation, one way for long term growth and catch-up is to make a transition to the OBM (own brand manufacturer). But, the transition is not easy or even risky. This paper analyzes the cases of three companies in Korea to find out common features in their successful transition to OBM. They are Aurora World (a flush toy maker), Hankook Chinaware (a chinaware maker), and Hanacobi (a plastic-made food container maker with the Lock-and-Lock brand). These firms can be commonly characterized by 1) arranging access to external knowledge base and steady increase of in-house R&D efforts and capabilities leading to acquisition of formal IPRs and their management, and 2) establishment of global production networks with factories in lower-income countries as well as their own independent global marketing network.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.74-84
• /
• 2007

This paper presents a new dual-loop Delay Locked Loop(DLL) to expand the delay lock range of a conventional DLL. The proposed dual-loop DLL contains a Coarse_loop and a Fine_loop, and its operation utilizes one of the loops selected by comparing the initial time-difference among the reference clock and 2 internal clocks. The 2 internal clock signals are taken, respectively, at the midpoint and endpoint of a VCDL and thus are $180^{\circ}$ separated in phase. When the proposed DLL is out of the conventional lock range, the Coarse_loop is selected to push the DLL in the conventional lock range and then the Fine_loop is used to complete the locking process. Therefore, the proposed DLL is always stably locked in unless it is harmonically false-locked. Since the VCDL employed in the proposed DLL needs two control voltages to adjust the delay time, it uses TG-based inverters, instead of conventional, multi-stacked, current-starved inverters, to compose the delay line. The new VCDL provides a wider delay range than a conventional VCDL In overall, the proposed DLL demonstrates a more than 2 times wider lock range than a conventional DLL. The proposed DLL circuits have been designed, simulated and proved using 0.18um, 1.8V TSMC CMOS library and its operation frequency range is 100MHz${\sim}$1GHz. Finally, the maximum phase error of the DLL locked in at 1GHz is less than 11.2ps showing a high resolution and the simulated power consumption is 11.5mW.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.189-189
• /
• 2010

The Improved flux-lock type superconducting fault current limiter(SFCL) is composed of a series transformer and superconducting unit of the YBCO coated conductor. The primary and secondary coils in the transformer were wound in series each other through an iron core and the YBCO coated conductor was connected with secondary coil in parallel. In a normal condition, the flux generated from a primary coil is cancelled out by its structure and the zero resistance of the YBCO thin films. When a fault occurs, the resistance of the YBCO coated conductor was generated and the fault current was limited by the SFCL. In this paper, we investigated the fault current limiting characteristics through the spot at the beginning of the fault current in the Improved flux-lock type SFCL. The experiment results that the fault current limiting characteristics was difference according to the point of a fault current started. Through the analysis, it was shown that shorter the time of a phase transition.

• 한국가시화정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.134-137
• /
• 2007

The temporal evolution of wake behind a circular cylinder oscillating rotationally with a relatively high forcing frequency has been investigated experimentally using a dynamic PIV technique. Experiments were carried out with varying the frequency ratio $F_R\;(=f_f/f_n)$ in the range from 0.0 (stationary) to 1.6 at oscillation amplitude of ${\theta}_A=30^{\circ}$ and Reynolds number of $Re=4.14{\times}10^3$. Depending on the forcing condition ($F_R$), the flow was divided into three regimes; non-lock-on ($F_R=0.4$), transition ($F_R=0.8$, 1.6) and lock-on regimes ($F_R=1.0$) with markedly different flow structure in the near-wake region behind the cylinder. When the frequency ratio was less than 1.0 ($F_R{\le}1.0$), the rotational oscillatory motion of the cylinder decreased the length of the vortex formation region and enhanced the mutual interaction between large-scale vortices across the wake centerline. The entrainment of ambient fluid seemed to play an important role in controlling the near-wake flow and shear-layer instability. However, the flow characteristics changed markedly beyond the lock-on flow regime ($F_R=1.0$) due to high-frequency forcing. At $F_R=1.6$, the mutual interactions between the vortices shed from both sides of the cylinder were not so strong. Thereby, the flow entrainment and momentum transfer into the wake center region were reduced. In addition, the size of the large-scale vortices decreased since the lateral extent of the wake was suppressed.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.74-80
• /
• 2009

In this study, the static and modal analyses to find the characteristic of eigenvalues for a towed cable were with a free boundary condition at the bottom end carried out with numerical study. The resulting numerical code with finite element method was used to study sample problems for a cable with towing speeds. After tracing the equilibrium state with a towing speed through the static analysis, modal analysis on the basis of static results was performed. The static top tension for a critical towing speed is nearly 50 percent of what it was for a free hanging pipe. From static analyses, it is found that towing speed has a noticeable effect on top tension of a towed pipe. At a high towing speed, differences between the first and second periods become larger. Compared to the fundamental period for a free hanging pipe, that for a towed pipe with a critical towing speed is approximately 1.4 times larger. This result is very important point in that the lock in condition and tension of the towed cable system with top excitation can be predicted. The corrected close form solution to solve natural periods for a towed cable was presented in this study. The code is validated by comparison of the results of theoretical and numerical studies. Two results were in very good agreement. This study can contribute to predicting the lock-in condition and tension for a towed cable or pipe with top excitation.