• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1759-1761
• /
• 2016

In this letter, we propose a GPS repeat-back jamming signal detection scheme based on the sample variance of the horizontal location of a receiver and evaluate the detection performance using real positioning data of the GPS receiver.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.498-504
• /
• 2015

This paper proposed an Spread Spectrum Time Domain Reflectometry (SSTDR) using time-frequency correlation analysis in order to have more accurate fault determination and location detection than classical SSTDR despite increased signal attenuation due to the long distance to cable fault location. The proposed method was validated through comparison with classical SSTDR methods in open- and short-circuit fault detection experiments of low-voltage power cables. The experimental results showed that the proposed method can detect correlation coefficients at fault locations accurately despite reflected signal attenuation so that cable faults can be detected more accurately and clearly in comparison to existing methods.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3256-3263
• /
• 2021

The main steam line break accident is an essential initiating event of the pressurized water reactor. In present work, the fuzzy set theory and the signal-based fault detection method has been used to detect the occurrence and diagnosis of the location and break area for the small scale MSLB. The models are validated by the AP1000 accident simulator based on MAAP5. From the test results it can be seen that the proposed approach has a rapid and proper response on accident detection and location diagnosis. The method proposed to evaluate the break area shows good performances for small scale MSLB with the relative deviation within ±3%.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.250-252
• /
• 2004

The aim of this paper is to provide a guide to those methods of train detection which are available, or are likely to become available, to the designer of train control or other relevant systems. In broad terms, train detection may be defined as the process of generating information which describes the location and movement of trains. Train detection information is difficult to define in isolation. Consider, for example, the train detection information required in a modern train control system. This may vary considerably : in a future high performance train control system, it might be necessary to know the precise position, direction of movement, speed, and possibly even the acceleration or braking, of all trains in the control area : in a less demanding application, it might be sufficient to know only the location of trains in terms of the occupation of sections of track.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.2
• /
• pp.3-10
• /
• 2018

Damage location and extent of structure could be detected by the inverse analysis on dynamic response properties such as frequencies and mode shapes. In practice the measured difference of natural frequencies represent the stiffness change reliably, however the measured mode shape is insensitive for stiffness change, but provides spatial information of damage. The damage detection index on shear building structures is formulated in this study. The damage detection index could be estimated from mode shape and srory stiffness of undamaged structure and frequency difference between undamaged and damaged structure. For the verification of the observed damage detection method, the numerical analysis of Matlab and MIDAS and shacking table test were performed. In results, the damage index of damaged story was estimated so higher than undamaged stories that indicates the damaged story apparently.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.122-128
• /
• 2013

This paper presents a detection algorithm that accurately finds the active area of a video player on monitors or smart TVs. Unlike the previous approaches, temporal difference-based detection algorithms or hooking programs, the proposed detection algorithm can locate the active video player by using the spatial and temporal correlation and a corner detection filter. First, an initial location of the video player is found using conventional temporal difference-based detection. Then, starting from the initial location, the four corners of the active video player are detected by the spatial edge information and the corner detection filter. The experimental results show that proposed algorithm provides fast detection speed and high accuracy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1002-1008
• /
• 2011

The mine-detection system, which is one of the various mission equipments for Ground Vehicle System, detects mine under the ground. The mine detection sensors comprised of Metal Detection(MD) sensor and Ground Penetration Radar(GPR) are attached on the end of the multi-DOF manipulator. The manipulator moves the sensor to sweep mine areas keeping the pre-determined distance between the sensor and ground to enhance mine detection performance. The detection system can be operated automatically, semi-automatically and manually. When the detection system is operated automatically, the sensor should avoid collisions with unexpected obstacles which may exist on the ground. Two types of ultra-sonic sensors were developed for the mine detection sensor system to keep the appropriate gap between sensor and the ground to avoid the obstacles. Also, mine place marking device was developed.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.19-28
• /
• 2014

Recent advancements in the IT industry have made daily life more convenient than ever before. In particular, studies have focused on the position detection of individuals using the GPS in smartphones, and this application has been utilized actively in emergency rescue organizations. However, existing methods send the location information of a user to a predetermined guardian set by the user or to a control center when the user enters into or deviates from a predetermined space. Such spaces are created by an arbitrary radius, thereby making it difficult to set a detailed area by using an existing radius-area creation method in an unstructured space and path with a specific road, such as for trekking, amusement parks, or mountaineering. This study proposes a novel method for setting up an area by connecting multiple radii to improve the existing radius-area creation method in order to easily set a detailed area in smart devices or on the Internet. In addition, an optimization method for resource use is proposed by comparing the operation results in which a user's location is detected by using the proposed location-based area setup method and deviation detection.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.5
• /
• pp.1069-1076
• /
• 2017

Recently $Pok\acute{e}mon$ GO implements an online game with location-based real time augmented reality on mobile. The correct play of this game should be based on collecting the $Pok\acute{e}mon$ that appears as the user moves around by foot, but as the popularity increases, it appears an abuse to play easily. Many people have used an application that provides a mock location service such as Fake GPS, and these applications can be judged to be cheating in online games because they can play games in the house without moving. Detection of such cheating from a client point of view (mobile device) can consume a large amount of resources, which can reduce the speed of the game. It is difficult for developers to apply detection methods that negatively affect game usage and user's satisfaction. Therefore, in this paper, we propose a method to detect users abusing mock location service in online game by route analysis using GPS location record from the server point of view.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.248-257
• /
• 2014

As observed in the recent war, suppression of enemy air defense operation is one of the major tactics, simultaneously conducted with high payoff target. Specifically, our air defense operation should be properly constructed, since the operating environment of our forces mostly consists with mountainous terrain, which makes detections of the enemy difficult. The effective arrangements of low altitude air defense radars can be suggested as a way of improving the detection capability of our forces. In this paper, we consider the location problem of low altitude air defense radar, and formulate it as an Integer Programming. Specifically, we surveyed the previous researches on facility location problems and applied two particularly relevant models(MCLP, MEXCLP) to our problem. The terrain factor was represented as demand points in the models. We verified the optimal radar locations for operational situations through simulation model which depicts simple battle field. In the simulation model, the performance of optimal radar locations are measured by the enemy detection rate. With a series of experiments, we may conclude that when locating low altitude air defense radars, it is important to consider the detection probability of radar. We expect that this finding may be helpful to make a more effective air defense plan.