• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6687-6692
• /
• 2013

Background: This study aimed to determine the demographical distribution, survival and prognostic factors for neuroendocrine tumors monitored in our clinic. Materials and Methods: Data for 52 patients who were admitted to Cumhuriyet University Medical Faculty Training Research and Practice Hospital Oncology Center between 2006 and 2012 and were diagnosed and treated for neuroendocrine tumors were investigated. Results: Of the total, 30 (58%) were females and 22 (42%) were males. The localization of the disease was gastroenteropancreatic in 29 (56%) patients and other sites in 23 (44%). The most frequently involved organ in the gastroenteropancreatic system was the stomach (n=10, 19%) and the most frequently involved organ in other regions was the lungs (n=10, 19%). No correlation was found between immunohistochemical staining for proteins such as chromogranin A, synaptophysin, and NSE and the grade of the tumor. The patients were followed-up at a median of 24 months (1-90 months). The three-year overall survival rate was 71%: 100% in stage I, 88% in stage II, 80% in stage III, and 40% in stage IV. The three-year survival rate was 78% in tumors localized in the gastroenteropancreatic region, and 54% in tumors localized in other organs. In the univariate analysis, gender, age, performance status of the patients, grade, localization, surgical treatment, and neutrophil/lymphocyte ratio (${\leq}5$ versus >5) affected the prognosis of the patients. Conclusions: Most of the tumors were localized in the gastroenteropancreatic region, and the three-year survival rate in tumors localized in this region was better than the tumors localized in other sites. Surgical treatment was a positive independent prognostic factor, whereas Grade 3 and a neutrophil/lymphocyte ratio of >5 were negative independent prognostic factors.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.197-208
• /
• 1999

The process of localization of cracks and movement of the fracture process zone(FPZ) was studied using the acoustic-emission(AE) techniques. The rate of AE events and sources of AE activity were studied for mortar and rock specimens loaded in uniaxial compression. A series of transducers could be used to detect and AE activity. Based on the time differences between detection of the event at different transducers, source of AE activity could be detected. The rate of AE events increased sharply before peak load. The highest rate occurred just after peak load was attained. The effective crack length estimated from the modified linear-elastic fracture mechanics seemed consistent with the optical and AE measurements.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.233-236
• /
• 2004

This paper proposes new method for the enhancement of nonexistent high frequency spectral contents from low sample rate audio signal. For example, Due to the protocol constraint, the audio bandwidth of MP3 is restricted to 16Khz. Although band-restricted MP3 audio provide savings of storage space and network bandwidth, it suffers a major problem of a loss in high frequency fidelity such as localization, ambient information, and bright nature of audio. This paper provides a new mathematical analysis for the adaptive estimation of the high frequency contents based on the nature of the input low sample rate audio. Proposed method can be worked globally to any kind of audio such as speech and music that are restricted by sampling rate and bandwidth.

• Coupled systems mechanics
• /
• v.7 no.6
• /
• pp.669-690
• /
• 2018

This paper deals with numerical modeling of dynamic failure phenomena in rate-sensitive brittle and/or ductile materials. To this end, a two-dimensional continuum viscodamage-embedded discontinuity model, which is based on our previous work (see Do et al. 2017), is developed. More specifically, the pre-peak nonlinear and rate-sensitive hardening response of the material behavior, representing the fracture-process zone creation, is described by a rate-dependent continuum damage model. Meanwhile, an embedded displacement discontinuity model is used to formulate the post-peak response, involving the macro-crack creation accompanied by exponential softening. The numerical implementation in the context of the finite element method exploiting the second-order mid-point scheme is discussed in detail. In order to show the performance of the model several numerical examples are included.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.67-72
• /
• 2002

Real-time techniques are motivated by a number of factors including the potential for direct acquisition of diagnostic quality images, facilitation of patient-specific imaging parameters, and reduced examination time. Real-time MRI includes not only a rapid pulse sequence but also high speed image reconstruction and easy interactivity. The frame rate of the real-time technique used should be matched to the physiological timeframes under study. Principal applications thusfar have been in localization, fluoroscopic triggering, guidance of other processes, and potentially in the generation of diagnostic images of moving structures.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.581-587
• /
• 2010

In this study, we investigated the effect of the simplification for low frequency region in Head-Related Transfer Function(HRTF) on the sound localization. For this purpose, HRTF was measured and analyzed. The result in the standard deviation of HRTF showed that the directional dependence of low frequency was smaller than that of high frequency region, which means the possibility of simplification in the low frequency region. Simplification was performed by flattening of the low frequency amplitude characteristics with the insertion of the high-pass filter, whose cutoff frequency is given by boundary frequency. Auditory experiments were performed to evaluate the simplified HRTF. The result showed that direction perception was not influenced by the simplification of the frequency characteristics of HRTF for the error of sound localization. The rate of confusion for the front and back was not affected by the simplification of the frequency characteristics within 1kHz of HRTF. Finally, we made it clear that the sound localization was not affected by the simplification of frequency characteristics of HRTF within 1kHz. The result is expected to be utilized to reduce the size of speech information with no deterioration of the directional characteristics of the speech signal.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1697-1703
• /
• 2014

In this paper, we propose an indoor RSSI (received signal strength indication)-based localization method that uses virtually overlapped visible light with an indoor LED lighting system. In our system, a photodiode (PD) measures the RSSI from LED lamps that blink in one row or column units. Subsequently, the RSSI is used to obtain the horizontal distances between the LED lamps and the receiver with the predetermined characteristics curve, R-D curve, that represents the relation between the RSSI and the horizontal distances. When the controlled LED lamps blink in one row or column units, the R-D curve at the border of the LED lamps is different because of the weak lighting, which results in the position sensing error of the receiver. The deviation of the optical power of each LED also causes the error. To solve these problems, we propose a method that overlaps the visible light through the numerical operation at the receiver side without any modification of the light source side. Our proposed method has been simulated in a room measuring $1.2{\times}1.2{\times}1.8m^3$ considering the effect of the error on the optical power of the LED. The simulation result shows that the proposed method eliminates the error condition with the R-D curve and achieves an average positioning error of 13.4 mm under the error rate 3% of the optical power.

• The Korean Journal of Zoology
• /
• v.35 no.2
• /
• pp.149-160
• /
• 1992

Using the protein A-gold complex, the mvoabrillogenesis and actin localization of cultured myoblast were invastisated. In the superstructural changes of mvogenic cell during differentiation, pectoral myoblasts contained large nucleus and numerous ribosomes but no myofibrils during the first 24 hr of cultures. Mvoblast initiated to differentiate at 3-day of culture contained the primitive myofibrillar structure. At 96 hr of culture, the mvofibrillar structure showed reletively discernable Z band but pools defined A, H and M bands. The feature of sarcomeric structure showed more defined form at cultur 5 day. In the aspect of actin localization, actin wvas diffusely detected throughout the cytoplasm of myogenic cell and nucleus during the proliferating stage. At 72 hr of culture, with the appearantc oi primitive mvofibrils, gold particles were observed in surrounding of myofibrils but still presented in overall of cytoplasm, especially in the surface and lumen of endoplasmic reticulum. With the gradual increase of culture time, local distribution of actin was readily detected within cytoplasm. In the 5-day specimen of cultures, gold particles precisely indicate the sites of actin localifation within the sarcomere. These results indicate the time of onset of myofibrill appearance and the biosynthetic and incorporation pathway of actin molecules into sarcomeric structure during myofibrillogenesis. Thus, in the present study, the first mvoabrillar structure was detected at culture 3 day, and the initiation of assembly into a typical sarcmeric structure was observed at culture 5 day. It seems, however, that the course of events on myofibrillogenesis of cultured myoblasts can be changed with great dependence of culture conditions including the number and groluth rate of mononucleated mvoblasts after seeding although the fundamental process shows identical appearances.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.687-694
• /
• 2022

In this paper, we proposed an autonomous vehicle platform that delivers goods to a designated destination based on the SLAM (Simultaneous Localization and Mapping) map generated indoors by applying the Visual SLAM technology. To generate a SLAM map indoors, a depth camera for SLAM map generation was installed on the top of a small autonomous vehicle platform, and a tracking camera was installed for accurate location estimation in the SLAM map. In addition, a convolutional neural network (CNN) was used to recognize the label of the destination, and the driving algorithm was applied to accurately arrive at the destination. A prototype of an indoor delivery autonomous vehicle was manufactured, and the accuracy of the SLAM map was verified and a destination label recognition experiment was performed through CNN. As a result, the suitability of the autonomous driving vehicle implemented by increasing the label recognition success rate for indoor delivery purposes was verified.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.237-240
• /
• 2004

High strain-rate deformation behavior of NiAl/Ni micro-laminated composites was characterized by split hopkins on pressure bar(SHPB). When the strain rate increased, the compressive stress of micro-laminated composites were increased a little. When the intermetallic volume fraction increased, the compressive stress of micro-laminated composites increased linearly irrespective of strain rate. Absorbed energy during the quasi-static and SHPB tests was calculated from the integrated area of stress-strain curve. Absorbed energy of micro-laminated composites deviated from the linearity in terms of the intermetallic volume fraction but merged to the value of intermetallic as the strain rate increased. This was due to high tendency of intermetallic layer for the localization of shear deformation at high strain rate. Microstructure showing adibatic shear band(ASB) confirmed that the shear strain calculated from the misalignment angle of each layer increased and ASB width decreased when the intermetallic volume fraction. Simulation test impacted by tungsten heavy alloy cylinder resulted that the absorbed energies multiplied by damaged volume of micro-laminated composites were decreased as the intermetallic volume fraction increased. Fracture mode were changed from delamination to single fracture when the intermetallic volume fraction and this results were good matched with previous results[l] obtained from the fracture tests.