• 한국수산과학회지
• /
• 제28권1호
• /
• pp.7-14
• /
• 1995

1992년부터 1993년까지 수행된 득량만의 양식생산성 향상을 위한 종합적 해양조사의 일환으로 수온과 염분 관측을 실시한 결과 중에서 하계의 자료를 비교 분석하였다. 두 해에 여름철의 기상조건은 서로 대조적이었는데 1992년에는 비가 적고 맑은 날이 많았던데 비해 1993년에는 흐린 날이 많고 강수량 또한 많아 이상저온 현상이 심했다. 이러한 기상의 영향은 만내의 수온과 염분의 분포에 직접적으로 영향을 주었다. 바람이 대체로 약한 여름에는 태양복사에 의한 열 공급과 조류에 의한 연직혼합 및 해수순환에 의한 열 수송에 의해서 수온분포가 결정되는데, 염분분포에는 열 공급 대신에 강수에 의한 담수의 공급이 중요해진다. 서부와 북동부의 천해역이 고온저염수가 분포하여 입구로부터 상류 방향으로 수온은 증가하고 염분이 감소하는 1992년과는 달리 1993년에는 등온선과 등염선이 만의 종축과 평행한 경향이 강하여 많은 강수량과 함께 복사열의 공급이 감소 한데다가 만의 종축 방향으로 흐르는 조류와 항류의 영향이 상대적으로 증가된 결과로 해석된다. 한편, 연직분포에 있어서는 조류가 강한 대조기에는 성층이 파괴되며 소조기에는 성층이 발달하는 현상을 보여주었다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.8-8
• /
• 2003

Electron-phonon interaction plays a significant role in forming of colossal magnetoresistance effect (CMR). Polaron formation was observed by neutron diffraction and by extended X-ray absorption fine structure (EXAFS) analysis. Local probe as given by the EXAFS is a useful method to study the polaronic charge and its dependence on temperature and ions size. Here we present the EXAFS study of polaronic charge in La/sub 0.7/Ca/sub 0.3-X/Ba/sub X/MnO₃ compositions. The single phase La/sub 0.7/Ca/sub 0.3-X/Ba/sub X/MnO₃ manganites (x=0; 0.03; 0.06, ..., 0.3) were prepared by ceramic technology [1]. The Curie temperature was determined by extrapolation of the temperature dependence of the magnetization (down to zero magnetization). EXAFS experiments were carried out at the 7C EC beam line of the Pohang Light Source (PLS) in Korea. The atomic pair distribution functions (PDF) were obtained by re-regularization method [2] from filtered spectra. The PDF for the x=0.3 sample showed a single peak function and for x=0.0, 0.03, 0.06, 0.09, 0.12 compositions were asymmetric in agreement with a small Jahn-Teller elongation of two (short and long) bonds of the MnO/sub 6/ octahedron. Dispersion, σ/sub Min-O//sup 2/, and asymmetry, σ/sub Min-O//sup 3/, of the Mn-O bond distances varied significantly with x and showed a maximums at x=0.09. The maximum of σ/sub Min-O//sup 2/ is caused by increase of dynamic rms displacements of the Mn-O distances near the T/sub C/. The observed x dependence of σ/sub Min-O//sup 3/ reflects the reduction of charge carriers mobility at approaching to T/sub C/ from low as well as high temperatures.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.615-627
• /
• 1997

An experiment was performed to local heat transfer coefficient and Nusselt number in the circular duct of 180.deg. bend for Re=6*10$^{4}$, 8*10$^{4}$ and 1*10$^{5}$ at swirling flow and non-swirling flow conditions. The test tube with circular section was made by stainless which has curvature ratio 9.4. The wall of test tube was heated directly by electrical power to 3.51 kw and swirling motion of air was produced by a tangential inlet to the pipe axis at the 180 degree. Measurements of local wall temperatures and bulk mean temperature of air are made at four circumferential positions in the 16 stations. The wall temperatures show particularly reduced distribution curve at bend for non-swirling flow but this effect does not appear for swirling flow. Nusselt number distributions for swirling flow which was calculated from the measured wall and bulk temperatures were higher than that of non-swirling flow. Average Nusselt number of swirling flow increased about 90 ~ 100% than that of non-swirling flow whole through the test tube. The Nu/N $u_{DB}$ values at the station of 90.deg. for non-swirling flow and swirling flow are respectively about 2.5 and 4.8 at Re=6*10$^{4}$. Also that is good agreement with Said's result for non-swirling flow. flow.

• 설비공학논문집
• /
• 제14권5호
• /
• pp.424-432
• /
• 2002

Numerical analysis has been conducted to characterize deposition rates of aerosol particles onto a heated, rotating disk with electrostatic effect under the laminar flow field. The particle transport mechanisms considered were convection, Brownian diffusion, gravitational settling, thermophoresis and electrophoresis. The aerosol particles were assumed to have a Boltzmann charge distribution. The electric potential distribution needed to calculate local electric fields around the disk was calculated from the Laplace equation. The Coulomb, the image, the dielectrophoretic and the dipole-dipole forces acting on a charged particle near the conducting rotating disk were included in the analysis. The averaged particle deposition vetocities and their radial distributions on the upper surface of the disk were calculated from the particle concentration equation in a Eulerian frame of reference, along with a rotation speed of 0∼1,000rpm, a temperature difference of 0∼5K and a charged disk voltage of 0∼1000V.Finally, an approximate deposition velocity model for the rotating disk was suggested. The present numerical results showed relatively good agreement with the results of the present approximate model and the available experimental data.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.921-929
• /
• 2005

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot spots in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• 한국초전도ㆍ저온공학회논문지
• /
• 제26권1호
• /
• pp.20-24
• /
• 2024

Over the past four years, as the COVID-19 pandemic has struck the world, cold chain of COVID-19 vaccination has become a hot topic. In order to overcome the pandemic situation, it is necessary to establish a cold chain that maintains a low-temperature environment below approximately 203K (-70℃), which is the appropriate storage temperature for vaccines, from vaccine suppliers to local hospitals. Usually, cryocoolers are used to maintain low temperatures, but it is difficult for small-scale local distribution to have cryocooler due to budget and power supply issues. Accordingly, in this paper, a cryogenic TSU (Thermal storage unit) system for vaccination cold chain is designed that can maintain low temperatures below -70℃C for a long time without using a cryocooler. The performance of the TSU system according to the energy storage material for using as TSU is experimentally evaluated. In the experiments, four types of cold storage materials were used: 20% DMSO aqueous solution, 30% DMSO aqueous solution, paraffin wax, and tofu. Prior to the experiment, the specific heat of the cold storage materials at low temperature were measured. Through this, the thermal diffusivity of the materials was calculated, and paraffin wax had the lowest value. As a result of the TSU system's low-temperature maintenance test, paraffin wax showed the best low-temperature maintenance performance. And it recorded a low-temperature maintenance time that was about 24% longer than other materials. As a result of analyzing the temperature trend by location within the TSU system, it was observed that heat intrusion from the outside was not well transmitted to the low temperature area due to the low thermal conductivity of paraffin wax. Therefore, in the TSU system for vaccine storage, it was experimentally verified that the lower the thermal diffusivity of the cold storage material, the better low temperature maintenance performance.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.545-553
• /
• 2006

Generally, the temperature drop under $0^{\circ}C$ on vaporizer surface creates frozen dews. This problem seems to increase as the time progress and humidity rises. In addition, the frozen dews create frost deposition. Consequently, heat transfer on vaporizer decreases because frost deposition causes adiabatic condition. Therefore, it is very important to solve this problem. This paper aims to study of the optimum design of used vaporizer at local LNG station. In this paper, experimental results were compared with numerical results. Geometries of numerical and experimental vaporizers were identical. Studied parameters of vaporizer are angle between two fins $(\Phi)$ and fin thickness $(TH_F)$. Numerical analysis results were presented through the correlations between the ice layer thickness $(TH_{ICE})$ on the vaporizer surface to the temperature distribution of inside vaporizer $(T_{IN})$, fin thickness $(TH_F)$, and angle between two fins $(\Phi)$. Numerical result shows good agreement with experimental outcome. Finally, the correlations for optimum design of vaporizer are proposed on this paper.

• 한국대기환경학회지
• /
• 제18권3호
• /
• pp.183-192
• /
• 2002

Concentrations of $\alpha$- and ${\gamma}$-hexachlorocyclohexane (HCH) were measured in ambient air samples at a two week intervals between July 1999 and February 2000 at Ansung, Kyonggi province. Their concentration levels averaged at 78 ($\alpha$-HCH) and 18 pg/m$^3$(${\gamma}$-HCH). Although the use of HCHs was ceased in South Korea since 1979, their residues are still present in air even after nearly 20 years. Given the composition of the two main HCH pesticide formulation (technical HCH antral lindane), the $\alpha$/${\gamma}$-HCH ratio in air is a useful indicator on the regional scale. The moderately low $\alpha$/${\gamma}$-HCH ration in this study indicates previous usage of both technical HCH and lindane. The relationship of temperature with gas-phase partial pressures was also examined using the Clausius-Clapeyron equation. Slopes generated by linear regression analysis between partial pressure (In P) and 1/T were considerably steep thor HCHs. It is thus suggested that their concentrations are controlled by re-volatilization processes from surfaces in the local surroundings of the sampling site.

• 대한기계학회논문집B
• /
• 제33권5호
• /
• pp.358-364
• /
• 2009

This paper is to investigate the influence of driving patterns of slow and high speed vehicles on the performance of continuously regenerating diesel particulate filter(DPF) system matched with operating conditions in field application. The DPF performance test for field application was carried out for two identical DPFs installed to slow and high speed vehicles. A slow speed vehicle was selected among local buses which have driving patterns to repeat running and stop frequently, while a high speed vehicle was prepared to have long route of high speed over 60km/h like inter-city buses. In this test, the regeneration performance on the DPF of slow speed vehicle deteriorated because of high soot load index(SLI) in spite of same balance point temperature(BPT) distribution for high speed vehicle. The DPF of slow speed vehicle melted in the end because the rapid increase of back pressure caused high temperature over $1200^{\circ}C$ in the ceramic wall of DPF. The PM components like ash collected to the filter in the DPF were analyzed in order to investigate the cause of the defect and provide an operation performance of DPF system. In the result of the analysis, high levels of lubrication oil ash(Ca, Mg, P, Zn) were detected.

• 생물환경조절학회지
• /
• 제24권3호
• /
• pp.217-225
• /
• 2015

본 연구에서는 동절기 시설원예 난방에너지 절감을 위해 방울토마토의 온도민감부인 생장부를 추종하면서 난방을 수행할 수 있는 국소난방 시스템을 개발하고자 하였다. 방울토마토 생장부 추종형 국소난방시스템은 온실하류로의 균일한 열분배를 위해 내/외부 덕트와 온풍난방기를 연결하는 이중덕트 분배장치, 정식 후 작물 유인에 따라 덕트를 토마토 줄기끝 생장점과 개화화방을 추종하여 상하로 이동시키기 위한 권취장치 등으로 구성되었다. 국소난방 시스템의 운용은 토마토 정식 직후에는 덕트를 작물 상부에 위치시키며 작물 생장에 따라 생장부 국소난방과 차광 회피를 위해 덕트를 상하로 이동시켰다. 방울토마토 수경재배 온실을 대상으로 생장부 국소난방구와 관행의 바닥덕트 난방구에 대해 난방성능과 작물생육 비교시험을 수행하였다. 그 결과 생장부 국소난방구는 야간 난방시간에 작물 군락내 상부 기온이 하부에 비해 $0.9{\sim}2.0^{\circ}C$ 높으며, 바닥덕트 난방구에 비해 군락상부 기온은 $0.3{\sim}1.8^{\circ}C$ 높고, 하부 기온은 $1.4{\sim}1.8^{\circ}C$ 낮게 나타나 온도에 민감한 상부 생장부를 상대적 고온으로 관리하고, 군락하부는 상대적 저온으로 관리 가능하며, 관행 바닥덕트 난방구의 높이별 온도분포를 역전시킬 수 있음을 확인하였다. 토마토 군락에 대한 적외선 열화상 측정을 통해 정식 직후부터 줄기내림 유인재배기간에 걸쳐 생장부 국소난방구는 군락내에 높이별 엽온의 온도성층화를 형성하여 생장부 추종 국소난방이 가능함을 확인하였다. 난방방식별 작물생육 분석결과 초장을 제외한 나머지 항목은 유의적인 차이가 없었으며, 수확량에서도 생장부 국소난방구가 초기 수량이 약간 우세하였으나 총 수확량은 동일한 수준으로 나타났다. 온풍난방비 경유소비량은 생장부 국소난방구가 군락의 높이별 최적 온도관리로 관행 바닥덕트 난방구에 비해 약 23.7% 절감되는 것으로 나타났다. 본 시스템은 길이 90m 온실에 대한 적용시험에서 열분배 성능의 한계로 온실 상/하류간 온도편차가 발생하였으며, 시스템 개선을 위해 내부덕트의 직경 또는 두께 상향, 열복사 억제 재질의 덕트 사용 등 열분배 성능 최적화를 위한 추가연구가 필요한 것으로 판단되었다.