• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1748-1759
• /
• 2018

Weber Local Descriptor (WLD) is a stable and effective feature extraction algorithm, which is based on Weber's Law. It calculates the differential excitation information and direction information, and then integrates them to get the feature information of the image. However, WLD only considers the center pixel and its contrast with its surrounding pixels when calculating the differential excitation information. As a result, the illumination variation is relatively sensitive, and the selection of the neighbor area is rather small. This may make the whole information is divided into small pieces, thus, it is difficult to be recognized. In order to overcome this problem, this paper proposes Weber Symmetrical Local Graph Structure (WSLGS), which constructs the graph structure based on the $5{\times}5$ neighborhood. Then the information obtained is regarded as the differential excitation information. Finally, we demonstrate the effectiveness of our proposed method on the database of ORL, JAFFE and our own built database, high-definition infrared faces. The experimental results show that WSLGS provides higher recognition rate and shorter image processing time compared with traditional algorithms.

• Journal of architectural history
• /
• v.22 no.2
• /
• pp.43-54
• /
• 2013

Compared to Early Chosun Dynasty, the spatial structure of most local Eupseongs of Korea had a standardized change with the expansion and spread of the Rye-hak(禮學:a study of confucius Rite). Meanwhile in the process of rebuilding Eupseongs there was a tendency of relocation of the local government offices(官衙) and its attached facilities in terms of functions and use. Although it was PyeongSanseong Miryang Eupseong had an unreasonable spatial structure locating Gaeksa(客舍; accommodation house for visitors) in the middle of the local government office complex, and Dongheon(東軒;main office building) in the east of it before the Japanese Invasion of Korea in 1592. However with the reorganization of spatial Structure of local Eupseongs after the Japanese invasion Gaeksa was moved to the foot of Adongsan where commanded a fine view of river. Dongheon was moved to the center of Eupseong for the effective management of its auxiliary organizations. It was because road system and administrative efficiency had a serious effect on deciding the location of the local government office and its attached facilities. After the Japanese invasion Hyangchoeng(鄕廳), having been out of Eupseong, also was moved to the independent location within Eupseong separate from Dongheon and Gaeksa. It seemed to take into account the autonomy of Hyangchoeng. Dongheon, Gaeksa, and Hyangchoeng which are the crucial facilities of Milyang Eupseong were arranged at each angular point of big triangle. In order to enhance the administative efficiency, the attached administrative facilities were arranged surrounding Dongheon and Hyangchoeng. The spatial structure of Milyang Eupseong in the late Choseon dynasty was of great difference from that of uniformly organized system of early Choseon Period. It was because the development of administrative function, the pursuit of efficiency, and commercial progress had a great impact on the change of urban space.

• Journal of Distribution Science
• /
• v.15 no.4
• /
• pp.25-32
• /
• 2017

Purpose - The introduction and expansion of the railway network since the 19th century brought revolutionary changes in economic activities, performance, and structure. The purpose of this study is estimating the impact of railroads on the local agricultural and manufacturing structures in the 19th century USA. Research design, data, and methodology - To identify the impact of railroads on local economic structure, county-level panel data from the U.S. census were analyzed using a panel fixed-effect differences-in-differences regression. The empirical investigation focuses on whether railroads changed the overall volume and sectoral composition of the local agricultural sector, and whether they contributed to the growth of the local manufacturing industry and its productivity. Results - The railroad introduction led to the relative decline of the agricultural sector, while encouraging the growth of market-oriented gardening. As such, manufacturing productivity increased by the introduction of railroads, although manufacturing inputs and home manufactures were unaffected. Conclusions - The findings imply that railroads contributed to the growth of market-oriented farming in rural areas, and the rise of productivity in the local manufacturing sector. Meanwhile, evidence of railroad-driven growth for the entire agricultural sector or a massive reallocation of resources from agriculture to manufacturing were not found.

• Structural Engineering and Mechanics
• /
• v.23 no.1
• /
• pp.29-42
• /
• 2006

This paper describes the design scheme of the three-dimensional structures based on the concept of the cellular automata simulation. The cellular automata simulation is performed according to the local rule. In this paper, the local rule is derived in the mathematical formulation from the optimization problem. The cell density is taken as the design variable. Two objective functions are defined for reducing the total weight of the structure and obtaining the fully stressed structure. The constraint condition is defined for defining the local rule. The penalty function is defined from the objective functions and the constraint condition. Minimization of the penalty function with respect to the design parameter leads to the local rule. The derived rule is applied to the design of the three-dimensional structure first. The final structure can be obtained successfully. However, the computational cost is expensive. So, in order to reduce the computational cost, the material parameters $c_1$ and $c_2$ and the value of the cell rejection criterion (CRC) are changed. The results show that the computational cost depends on the parameters and the CRC value.

• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.795-807
• /
• 2008

A challenging problem in structural damage detection based on vibration data is the requirement of a large number of sensors and the numerical difficulty in obtaining reasonably accurate results when the system is large. To address this issue, the substructure identification approach may be used. Due to practical limitations, the response data are not available at all degrees of freedom of the structure and the external excitations may not be measured (or available). In this paper, an adaptive damage tracking technique, referred to as the sequential nonlinear least-square estimation with unknown inputs and unknown outputs (SNLSE-UI-UO) and the sub-structure approach are used to identify damages at critical locations (hot spots) of the complex structure. In our approach, only a limited number of response data are needed and the external excitations may not be measured, thus significantly reducing the number of sensors required and the corresponding computational efforts. The accuracy of the proposed approach is illustrated using a long-span truss with finite-element formulation and an 8-story nonlinear base-isolated building. Simulation results demonstrate that the proposed approach is capable of tracking the local structural damages without the global information of the entire structure, and it is suitable for local structural health monitoring.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.60.2-60.2
• /
• 2014

Hierarchical structure of star-forming regions is widespread and may be characteristic of all star formation. We studied the hierarchical structure of star-forming regions in the Local Group galaxies (M31, M33, Phoenix, Pegasus, Sextans A, Sextans B, WLM). The star-forming regions were selected from Galaxy Evolution Explorer (GALEX) far-UV imaging in various detection thresholds for investigating hierarchical structure. We examined the spatial distribution of the hot massive stars within star-forming regions from Hubble Space Telescope (HST) multi-band photometry. Small compact groups arranged within large complexes. The cumulative mass distribution follows a power law. The results allow us to understand the hierarchical structure of star formation and recent evolution of the Local Group galaxies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.686-690
• /
• 2012

The modal test has been carried out using the exciter machine to investigate the vibration characteristics of the hull and super structure of the ship. The conventional exciter acts only one(1) direction and the exciter should be reinstalled for different direction test, which consumes additional expense. The 3 axes exciter has been designed of which force acts three directions without reinstallation for efficient modal test of the ship. It consists of rotatable base frame structure and the clutch mechanism for the unbalances to excite three directions. And the 3 axes exciter for the local structure has been made in advance and its performance test was carried out in the laboratory. The developed 3 axes exciter shows the ability of three-directions excitation with simple operation and modal test for the various local structure of the ship will be performed.

• Korean journal of communication and information
• /
• v.52
• /
• pp.27-47
• /
• 2010

This study analyzes the latest statistics for 3 years based on the traits of market environment, internal organization characteristics(the size and distribution of workforce), and financial structure, and then, investigates the interactivity traits and drawbacks between organization and market environment, among the local broadcast stations, and, among the type of work in the internal organization, by interviewing with broadcasters working at the local stations. Major findings of this studies are : at first, statistically, the conditions of local market environment, the size of local station workforce, financial structure are very poor. And, the interactivity among the local broadcast stations have so many difficulties because of a conflict of interest. So, for getting over a difficult situation at the local stations, in addition to planning to support local stations with various policies, government and local stations should seek for solution to overcome the conflict of interest jointly.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.25-29
• /
• 2004

Some industrial steel structures are composed by components linked by several welding joints to constitute an assembly. The main interest of assembly simulation is to evaluate the global distortion of welded structure. The general method, thermo-elasto-plastic analysis, leads to excessive model size and computation time. In this study, a simplified method called "Local and Global approach" was developed to break down this limit and to provide a accurate solution for distortion. Local and global approach is composed of 3 steps; 1) Local simulation of each welding joint on a dedicated mesh (usually very fine due to high thermal gradients), taking into account for the non linearity of the material properties and the moving heat source. 2) Transfer to the global model of the effects of the welding joints by projection of the plastic strain tensors. 3) Elastic simulation to determine final distortions in global model. The welding deformation test for mock-up structure was performed to verify this approach. The predicted welding distortion by this approach had a good agreement with experiment results.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.11a
• /
• pp.36-46
• /
• 2002

The accurate characterization of paper structure may provide critical information for ideal selection of raw materials and papermaking processes as well as for predicting the behavior and the quality of final paper products. In this study, local paper structure and the relationship among the structural parameters, thickness, grammage, apparent density and surface roughness of various handsheet and commercial paper samples were evaluated by using recently developed methods. A new concept of surface roughness was also introduced. The results demonstrate that there is significant overestimation in the measured thickness when using the conventional caliper method that originates from the surface roughness and poor paper formation. A novel non-contact thickness tester, referred to as the twin laser profilometer(TLP), provided results that were not subject to these artifacts and thus provided the local intrinsic thickness and consequently the local intrinsic apparent density.