• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1233-1244
• /
• 2016

In the IoT network environments for LLNs(Low power and Lossy networks), IPv6 Routing Protocol for Low Power and Lossy networks(RPL) has been proposed by IETF(Internet Engineering Task Force). The goal of RPL is to create a directed acyclic graph, without loops. As recommended by the IETF standard, RPL route recovery mechanisms in the event of a failure of a node should avoid loop, loop detection, DIO Poisoning. In this process, route recovery time and control message might be increased in the sub-tree because of the repeated route search. In this paper, we suggested RPL route recovery method to solve the routing overhead problem in the sub-tree during a loss of a link in the RPL routing protocol based on IoT wireless networks. The proposed method improved local repair process by utilizing a route that could not be selected as the preferred existing parents. This reduced the traffic control packet, especially in the disconnected node's sub tree. It also resulted in a quick recovery. Our simulation results showed that the proposed RPL local repair reduced the recovery time and the traffic of control packets of RPL. According to our experiment results, the proposed method improved the recovery performance of RPL.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.430-437
• /
• 2020

In this research, the anti-windup techniques for the cascade control system are newly developed. Cascade control system has an additional internal feedback control loop to reject disturbances better than the conventional control system. Remarkable difference between the conventional single-loop control system and the cascade control system is the interaction that the controller output saturation of the secondary control loop strongly affects the integral action of the primary control loop. In industry, local back calculation anti-windup method has been mainly used for each controller without considering the interaction between the two controllers. But it cannot eliminate the integral-windup of the primary controller originated from the saturation of the secondary controller output. To solve the problem, the two anti-windup techniques of the cascade conditional integration and the cascade back calculation are proposed in this research by extending the local anti-windup techniques for the single-loop control system to the cascade control system. Simulation confirmed that the proposed methods can effectively remove the integral windup of the primary controller caused by the saturation of the secondary controller output and show good control performances for various types of processes and controllers. If the reliability of the proposed methods is proved through the applications to real processes in the future, they would highly contribute to improving the control performances of the cascade control system in industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1178-1188
• /
• 2002

Local Loop Unbundling(LLU) has been understood as the way of facilitate the competition on the access and the local telephone service market. There are major benefits of stimulating the competition in the local service, avoiding access network duplication and reducing in environmental disruption. However, LLU has several disadvantages such as removing incentives for building alternative access networks, undermining existing investment in alternative access networks, introducing new substantial costs to the industry and requiring prolonged and detailed regulatory intervention. The economic effects of LLU generally will be different according to the special situation of each countries and the object of LLU. In case of EU, most of countries have already introduced and implemented LLU. But EU can't expect the economic effects on LLU emerged in the early stage of introducing it and faced with dilemma. To be realized the successful implementation of LLU, I think, it is required to be reviewed about the main issues such as the problem of regulation, the reasonable level of LLU pricing and the technical & operational problems.

• 정보화사회
• /
• s.183
• /
• pp.40-43
• /
• 2006

WLL(Wireless Local Loop)은 흔히 '무선가입자망'으로 불린다. 수년 전 국내에서도 잠깐 반짝 등장했다가 업체들 개발노력만 헛되이 사장시킨 서비스이기도 하다. 교환기에서 가입자 단말까지를 무선으로 연결하는 방식의 이 서비스는 흔히 유선(PSTN 등)보다 저렴하게 구축할 수 있어 개도국 등 통신환경이 미비한 지역에서 선호된다. 이 때문에 '틈새시장용'이란 수식어도 따른다. 주류는 아니라는 것.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1196-1207
• /
• 1998

The link sublayer segmentizes a use data into several frames and transmits it through a wireless channel. In this case, the packet error probability and link throughput are affected by the frame size. And a portion of pure user data in a packet affects a link throughput. In this paper we analyze and simulate the retransmission scheme of the Wireless Local Loop(WLL) system and study the link throughput according to the payload size.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1802-1809
• /
• 2004

This paper discusses cost allocation model of common facilities in voice and data traffic of mobile telephone network. There are several methods to be considered including traffic, facility, revenue, Ramsey, and benchmarking in local loop unbundling for High Speed Internet. It is important to investigate the strength and weakness of each method. This paper reviews the theoretical literatures and compares the characteristics of each methodology. Also, case studies are employed to get the implications concerned. As a result, in the beginning, it is desirable to introduce 50:50 allocation method used in local loop unbundling in UK. Then, it is recommendable to apply the ratio allocation method as the quantities of voice and data traffic become equal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.234-240
• /
• 2002

A power amplifier with AlGaAs/InGaAs/GaAs HBT's has been developed for customer premise equipments of the quasi millimeter-wave frequency-band broadband wireless local loop(BWLL) system. Parameters of the linear and nonlinear equivalent circuits for a common base HBT have been extracted by a fitting method. The amplifier has been designed through the linear and nonlinear circuit simulations and fabricated on a ceramic substrate for a hybrid IC. The amplifier has produced a 25.5-dBm output power with 35% power-added efficiency(PAE) at 24.4 GHz and achieved a 7.5-dB linear power gain at 24.8 GHz. In 24.25 ∼24.75 GHz band, the amplifier has exhibited a saturated output over larger than 22 dBm and PAE higher than 25%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.411-424
• /
• 2017

An all-digital delay-locked loop (DLL) for a mobile memory interface, which runs at 0.11-2.5 GHz with a phase-shift capability of $180^{\circ}$, has two internal DLLs: a global DLL which uses a time-to-digital converter to assist fast locking, and shuts down after locking to save power; and a local DLL which uses a phase detector with an adaptive phase sampling window (WPD) to reduce jitter accumulation. The WPD in the local DLL adjusts the width of its sampling window adaptively to control the loop bandwidth, thus reducing jitter induced by UP/DN dithering, input clock jitter, and supply/ground noise. Implemented in a 65 nm CMOS process, the DLL operates over 0.11-2.5 GHz. It locks within 6 clock cycles at 0.11 GHz, and within 17 clock cycles at 2.5 GHz. At 2.5 GHz, the integrated jitter is $954fs_{rms}$, and the long-term jitter is $2.33ps_{rms}/23.10ps_{pp}$. The ratio of the RMS jitter at the output to that at the input is about 1.17 at 2.5 GHz, when the sampling window of the WPD is being adjusted adaptively. The DLL consumes 1.77 mW/GHz and occupies $0.075mm^2$.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.47-58
• /
• 1999

In this paper, we design the radio interface protocols of wideband Wireless Local Loop(WLL) that uses wideband Code Division Multiple Access(CDMA), and propose the random access procedures on access channel and analyze the performance of the channel. The structure of radio interface protocols are designed by three modular parts to meet the requirements of IMT-2000 : radio resource controlling part that depends on the radio resources, connection controlling part that is independent of the radio resources, and application part that supports the interface between different parts and user terminals. In addition, we propose the random access procedures on access channel and analyze the performance of the channel. We assume that both near-far effect and shadow fading can be compensated by open loop power control. We observe that the number of access probes(delay) depend on the initial mobile transmission power and power increment, and the poor estimation of initial mobile transmission power might increase the average number of access probes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.500-508
• /
• 2004

The heat transfer coefficients during gas cooling process of carbon dioxide in a horizontal tube were investigated. The experiments are conducted without oil in the refrigerant loop. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater, and a gas cooler(test section). The water loop consists of a variable-speed pump, an isothermal tank, and a flow meter. The gas cooler is a counterflow heat exchanger by cooled water flowing in the annulus. The $CO_2$ flows in the horizontal stainless steel tube. which is 9.53mm in O.D. and 7.75mm in I.D. The gas cooler is 6 [m] in length. which is divided into 12 subsections, respectively. The experimental conditions considered in the study are following range of variables : refrigerant temperature is between 20 and $100^{\circ}C$. mass fluxes ranged from 200 to 400kg/($m^2$.s), average pressure varied from 7.5 to 10.0MPa. The main results were summarized as follows : The friction factors of $CO_2$ in the gas cooler show a relatively good agreement with those predicted by Blasius' correlation. The local heat transfer coefficient in the gas cooler has compared with most of correlations, which are the famous ones for forced convection heat transfer of turbulent flow. The results show that the local heat transfer coefficient of gas cooler agrees well with the correlation by Bringer-Smith except that at the region near pseudo critical temperature. while that at the near pseudo critical temperature is higher than the correlation.