• 전자공학회논문지
• /
• 제53권6호
• /
• pp.21-28
• /
• 2016

본 논문은 수중 음파 센서 네트워크의 패킷 전송률을 높이고 에너지 소모량을 줄이기 위한 협력 전송 기법을 제안한다. 제안하는 기법은 각 노드에서 가상 안테나 배열이라고 부르는 분산 안테나들이 같은 패킷들을 전송하고, 수신노드에서는 수신된 패킷들을 결합하여 패킷 손실률을 낮춘다. 따라서 높은 전송 손실, 전파 지연 및 주위 잡음과 같은 수중 채널의 고유 특성을 고려한 채널 특성 기반의 협력 전송 기법은 중계노드들을 통한 높은 다이버시티 이득을 제공하여 수중 음파 센서 네트워크의 신뢰성을 향상시킨다. 또한 송신노드에서 채널 상태, 거리 비용, 각 노드 당 남은 에너지를 고려하여 이웃노드들 중에서 목적지와 중계노드를 선택하는 알고리즘을 제안한다. 모의실험 결과는 OPNET Moduler를 통해 제안된 방법의 평균 에너지 소비, 패킷 전달 비율, 응답 시간 측면에서 비-협력 기법 및 SPF(Shortest Path First) 기법보다 향상된 성능을 보여준다.

• 한국대기환경학회지
• /
• 제27권2호
• /
• pp.225-237
• /
• 2011

For each local town (6 cities and 8 counties) affiliated with Jeonbuk provincial government, characteristics of greenhouse gas (GHG) emissions were analyzed and key emission areas were drawn to establish mitigation policies of the regional greenhouse gases. National Institute of Environmental Research (NIER) reported that the total greenhouse gas emission of Jeonbuk was 20.93 million $tCO_2e$ in 2006. The inland area of 5 cities and 1 county (Jeonju, Gunsan, Iksan, Jungeup, Kimje, Wanju) covered 82% of total greenhouse gas emission in Jeonbuk, while the rest local towns of the province, mostly from mountainous areas were responsible for the rest of the total GHG emission. The cities and counties having relatively higher emission in Jeonbuk province were influenced dominantly by the emission from energy and waste sections. Also, agricultural section showed similar tendency except industrial cities such as Gunsan and Jeonju. In the internal portion of city and county, energy section showed the highest portion at the range of 72.1 (Sunchang)~97.0% (Jeonju) and agricultural section was at the range of 1.2% (Jeonju)~26.6 (Sunchang). When the portion of energy section was higher, the lower agricultural section. The emission index was applied to decide the key city and county and the potential city and county with two methodologies in this study. It was required that the key emission areas were drawn to establish regional greenhouse gases mitigation policies.

• Structural Engineering and Mechanics
• /
• 제13권4호
• /
• pp.369-385
• /
• 2002

Ductility capacity is comprehensively studied for steel moment-resisting frames. Local, story and global ductility are being considered. An appropriate measure of global ductility is suggested. A time domain nonlinear seismic response algorithm is used to evaluate several definitions of ductility. It is observed that for one-story structures, resembling a single degree of freedom (SDOF) system, all definitions of global ductility seem to give reasonable values. However, for complex structures it may give unreasonable values. It indicates that using SDOF systems to estimate the ductility capacity may be a very crude approximation. For multi degree of freedom (MDOF) systems some definitions may not be appropriate, even though they are used in the profession. Results also indicate that the structural global ductility of 4, commonly used for moment-resisting steel frames, cannot be justified based on this study. The ductility of MDOF structural systems and the corresponding equivalent SDOF systems is studied. The global ductility values are very different for the two representations. The ductility reduction factor $F_{\mu}$ is also estimated. For a given frame, the values of the $F_{\mu}$ parameter significantly vary from one earthquake to another, even though the maximum deformation in terms of the interstory displacement is roughly the same for all earthquakes. This is because the $F_{\mu}$ values depend on the amount of dissipated energy, which in turn depends on the plastic mechanism, formed in the frames as well as on the loading, unloading and reloading process at plastic hinges. Based on the results of this study, the Newmark and Hall procedure to relate the ductility reduction factor and the ductility parameter cannot be justified. The reason for this is that SDOF systems were used to model real frames in these studies. Higher mode effects were neglected and energy dissipation was not explicitly considered. In addition, it is not possible to observe the formation of a collapse mechanism in the equivalent SDOF systems. Therefore, the ductility parameter and the force reduction factor should be estimated by using the MDOF representation.

• 터널과지하공간
• /
• 제27권1호
• /
• pp.1-11
• /
• 2017

국내 지하 석회석 광산은 대부분 대단면 갱도로 개발되고 있으며 갱내통기는 주요 선풍기에 의한 통기방식보다는 자연통기 및 국부통기에 의존하고 있다. 국부통기는 국부선풍기와 풍관을 이용한 급배기 통기방식을 적용하고 있으나 대단면 갱도 특성과 갱내 굴진 운반장비의 디젤화에 따라 소요통기량이 대폭 증대하여 통기의 효율 및 경제성 확보가 주요과제로 대두되고 있다. 본 연구에서는 대단면 갱내 작업장 국부통기를 위한 선풍기 용량 최적화를 위하여 축류식 및 프로펠러 선풍기를 개발하여 갱내 승압력 및 통기효과를 비교 분석함을 목적으로 한다.

• The Journal of Korean Physical Therapy
• /
• 제24권3호
• /
• pp.202-207
• /
• 2012

Purpose: The purpose of this study was to determine the effect of monochromatic infrared energy (MIRE) on the blood flow of the superficial radial artery and local skin temperature in healthy subjects. Methods: Forty healthy volunteers were recruited and randomly assigned to MIRE group (n=20) and placebo group (n=20). The MIRE group received a 890 nm MIRE irradiation on the forearm using two therapy pads for 30 minutes. The therapy pad was composed of an array of 60 diodes. MIRE unit was set at bar 8, that corresponds to a diode power of 10 mW and a power density of $63mW/cm^2$. The placebo group received sham MIRE. Peak blood flow velocity (PBFV), mean blood flow velocity (MBFV), and skin temperature (ST) were measured pre- and post-MIRE irradiation. Results: There was a significant difference in PBFV (p<0.001), MBFV (p<0.001), and ST (p<0.001) between the pre- and post-treated values in the MIRE group. In contrast, no significant difference was found between the pre- and post-treated values in the placebo group. There was significant difference in mean change values from baseline of PBFV (p<0.001), MBFV (p<0.001), and ST (p<0.001) between the MIRE group and the placebo group. There was a significant increase in PBFV (p<0.001), MBFV (p<0.001), and ST (p<0.001) following MIRE irradiation. Conclusion: The arterial blood flow and local skin temperature of the forearm in the healthy subjects were significantly increased following MIRE irradiation.

• 터널과지하공간
• /
• 제25권6호
• /
• pp.543-555
• /
• 2015

최근 대단면 갱도로 개발하고 있는 국내 석회석광산은 작업공간 환기를 위하여 과거 석탄광산에 광범위하게 사용되던 형태의 국부 선풍기를 주로 이용하고 있다. 대단면 갱도에서의 낮은 정압손실을 고려할 때 고풍압 선풍기는 과다 설비용량으로 인하여 비용측면에서 심각한 한계를 보이고 있다. 대단면 갱도에서의 최적 선풍기는 안전한 작업환경 유지를 위한 충분한 환기량을 공급할 수 있어야 할 뿐만 아니라 저운전비용도 보장하여야 한다. 본 연구는 대단면 갱도 내에서 높은 환기효율과 경제성을 가지는 저풍압 국부선풍기를 개발함이 목적이다. 이론적 연구와 아울러 2개소의 단면적이 다른 현장 실험 연구를 통하여 저풍압 선풍기의 환기효율을 분석하였다. 본 연구결과는 작업공간 공기질 및 작업환경 개선을 위한 국부선풍기의 경제성과 효율 제고에 적용 가능할 것으로 기대된다.

• 한국식품영양학회지
• /
• 제14권2호
• /
• pp.106-112
• /
• 2001

The purpose of this study was to investigate to the effect of regular exercise on nutrients intakes and energy balance related to food habit and nutrient knowledge of college women. This study was conducted from May to June in 2000. One hundred and forty female students made their three day dietary records by 24-hr recall method and one day activity record. The questionaires were designed to fine out food habit and nutrition knowledge status. The height. weight and blood pressure were measured and also body fat mass and lean body mass measurements were performed. The results obtained are summerized as follows. Average height and weight of E(exercise) group were found to be increased than those of NE(non-exercise) group. The percent of body fat and body fat mass(kg) in E group were slightly lower than those of NE group. Calorie intake of NE group was 1,664kca1 per day. This was composed of carbohydrate 60%kcal. protein 14%local and fat 24%local. Calorie, calcium, iron, vitamin A, vitamin B$_2$ and niacin intakes of NE group were lower than those of RDA and calorie intake of E group was 2.313kca1 per day. This was composed of carbohydrate 54%, protein 13% and fat 31%. Other nutrients such as iron, vitamin A, niacin and vitamin C were lower than those of RDA. Daily energy expenditure and physical activity of E group were 2,397.6$\pm$49.2kca1; 1,035.7 $\pm$36.5kcal, respectively and it was higher than those of NE group.

• 한국철도학회논문집
• /
• 제12권4호
• /
• pp.590-596
• /
• 2009

본 연구에서는 탄소, 유리, 케블라 및 탄소-케블라 하이브리드 섬유로 제작된 원형튜브를 이용하여 각 소재별 에너지 흡수특성과 파손메커니즘을 규명하였다. 이를 위해 각 튜브에 대한 10mm/min의 준정적 압축시험을 수행하였다. 시험결과 탄소섬유 튜브가 가장 에너지 흡수특성이 우수했으며 탄소-케블라 하이브리드 섬유 튜브가 가장 낮은 에너지 흡수율을 보였다. 또한, 각 소재별 에너지 흡수메커니즘을 분석한 결과 탄소 및 유리섬유튜브는 취성파괴 모드로 압축되었다. 또한, 케블라 섬유 튜브는 국부좌굴에 의한 접힘모드가 지배적이고, 탄소와 케블라 하이브리드 섬유 튜브의 경우 단층굽힘과 국부좌굴모드가 혼합되어 나타났다.

• 에너지공학
• /
• 제24권1호
• /
• pp.10-16
• /
• 2015

최근 신뢰성을 기반으로 한 기법을 철도차량 유지관리에 도입, 적용하기 위해 많은 계획을 세우고 정착시키려는 업무가 진행되고 있으나 시간 및 비용대비 성과에 대해 기술적인 향상이 필요하다. 신뢰성기반의 유지관리 활동은 군수분야에서 시작하여 원자력, 항공 분야 등에서 가장 활발히 추진중이지만 국내철도 현장에도 접목하려는 연구를 본 논문에서 제시하였다. 철도 운영기관에서 신뢰성관련 업무를 도입하거나 적용하기 위해서는 우선 내부의 유지관리 환경을 검토할 필요가 있으며, 이러한 검토결과를 기반으로 각종 신뢰성 기법들을 철도현장에 맞게 적용하고, 특화된 신뢰성프로세스의 정립과 주요 대상 시스템을 선정하여 RCM (Reliability Centered Mainteinance)기법을 적용하여 적정성을 검토하였다. 그 결과 철도차량 유지관리를 보다 체계적이고 합리적인 방법으로 시행하기 위한 절차를 제시하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.13-13
• /
• 2010

Switching an elementary excitation by injecting a single carrier would offer the exciting opportunity for the ultra-high data storage technologies. However, there has been no methodology available to investigate the interaction of low energy discrete carriers with nano-structures. In order to map out the spatial dependency of such single carrier level interactions, we developed a pulse-and-probe algorithm, combining with low temperature scanning tunneling microscopy. The new tool, which we call single carrier spectroscopy, allows us to track the interaction with the target macrostructure with tunneling carriers on a single carrier basis. Using this tool, we demonstrate that it is possible not only to locally write and erase individual bi-solitons, reliably and reversibly, but also to track of creation yields of single and multiple bi-solitons. Bi-solitons are pairs of solitons that are elementary out-of-phase excitations on anti-ferromagnetically ordered pseudo-spin system of Si dimers on Si(001)-c(42) surfaces. We found that at low energy tunneling the single bisoliton creation mechanism is not correlated with the number of carriers tunneling, but with the production of a potential hole under the tip. An electric field at the surface determines the density of the local charge density under the tip, and band-bending. However a rapid, dynamic change of a field produces a potential hole that can be filled by energetic carriers, and the amount of energy released during filling process is responsible for the creation of bi-solitons. Our model based on the field-induced local hole gives excellent explanation for bi-soliton yield behaviors. Scanning tunneling spectroscopy data supports the existence of such a potential hole. The mechanism also explains the site-dependency of bi-soliton yields, which is highest at the trough, not on the dimer rows. Our study demonstrates that we can manipulate not just single atoms and molecules, but also single pseudo-spin excitations as well.