• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.2
• /
• pp.31-47
• /
• 2005

This study is to inspect and analyse the historical background, spacial organization and architectural features about the traditional government office building of Gangwon Gamyoung(the supreme local government office of Gangwondo in Chosun dynasty). The results are as follows. - Gangwon Gamyoung was located at the center of Gangwondo in consideration of distance to each small local office. And also it was located in consideration of geographical connection between Hanseong(today's Seoul). - The spatial organization of Gamyoung was divided into the three parts of entrance space, government office building space and backyard space. The entrance space was composed of three gates(Pojungru-Jungsammun-Naesammun). The government office building Space was consisted of business and living building as center of Sunhwadang(the main office building). And the backyard space was composed of Yonji(pond), Jungja(bower), and so on - The way to enter the space of Gamyoung follows the order from Pojungru(the first & outer main gate with a bower), Jungsammun(the second & intermediate gate), Naesammun(the third & inner gate) to Sunhwadang at last. - There were a beautiful Yonji(pond) which to be rectangular type and to have a round island with Bongraegak(bower) at Gamyoung backyard, the drain conduit and pedestrian road covered with pebble in the ground.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1054-1059
• /
• 2005

The artificial potential method uses a potential field to guide a robot from a start to a goal configuration respectively. The potential field consists of attractive potential used to pull a robot toward a goal and repulsive potential to keep it away from obstacles. However, there are two problems concerning local minimum and computational cost to be resolved in conventional artificial potential methods. This study proposes a method utilizing a spline surface that interpolates arbitrary boundaries and a domain reduction method that reduces the unnecessary area. The proposed spline surface interpolates arbitrary shaped boundaries and is used as an artificial potential to guide a robot for global motion planning of a mobile robot. A reduced domain process reduces the unnecessary domain. We apply a distance-weighted function as such a function, which blends distances from each boundary with a reduction in computational time compared with other analytical methods. As a result, this paper shows that an arbitrary boundary spline surface provides global planning and a domain reduction method reduces local minimum with quick operation.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2005.05a
• /
• pp.409-424
• /
• 2005

Today, many universities are confronted with the changing education paradigm such as e-Learning, Distance Education, Virtual University. This IT-based learning paradigm shift is certainly a new opportunity or a threat to our universities. The Local University Community e-Learning Centers that support the demand of e-Learning for their community are recommended. Tn order to operate these centers efficiently, the strategic roles of the e-Learning center should first be defined. To define the strategic roles, We classified the strategic roles of the e-Learning center into four dimensions, (1) to improve management efficiency, (2) to enhance educational service, (3) to acquire competitive advantages, (4) to build new education infrastructure, and each dimension has S or 6 measurement items. As result, to enhance the educational service was considered as the most significant factor among the four dimensions of strategic roles, and the infrastructure building was the next. Through the strategic roles definition and analysis of expected role ratings, we could have recommended the direction and operation policies of the e-Learning centers.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.173-179
• /
• 1999

In reverse engineering, when a shape containing multi-patched surfaces is digitized, the boundaries of these surfaces should be detected. The objective of this paper is to introduce a computationally efficient segmentation technique for extracting edges, ad partitioning the 3D measuring point data based on the location of the boundaries. The procedure begins with the identification of the edge points. An automatic edge-based approach is developed on the basis of local geometry. A parametric quadric surface approximation method is used to estimate the local surface curvature properties. the least-square approximation scheme minimizes the sum of the squares of the actual euclidean distance between the neighborhood data points and the parametric quadric surface. The surface curvatures and the principal directions are computed from the locally approximated surfaces. Edge points are identified as the curvature extremes, and zero-crossing, which are found from the estimated surface curvatures. After edge points are identified, edge-neighborhood chain-coding algorithm is used for forming boundary curves. The original point set is then broke down into subsets, which meet along the boundaries, by scan line algorithm. All point data are applied to each boundary loops to partition the points to different regions. Experimental results are presented to verify the developed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.842-849
• /
• 1997

The aim of this study is an investigation of the interaction of two micro hole defects affecting fatigue crack initation life and propagation behavior. The locatio of two micro hole defects was considered as an angle of alignment and the distance between the centers of two micro hole defects. The fatigue cracking behavior is experimented under bending. When micro defects are located close to each other, the fatigue crack initiation lives are varied with their relative locations. In the experiments, the area of local plastic strain strongly played a role in the fatigue crack initiation lives. Therefore we introduce a parameter which contains the plastic deformation area at stress concentrations and propose a fatigue crack initiation life prediction curve. In addition, the directions and propagation rates of fatigue cracks initiated at two micro hole defects are studied experimentally.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.691-697
• /
• 2008

Heat exchangers are commonly used in practice in a wide range of application, from heat and air-conditioning system in a household, to chemical processing and power production in large plant. An Experimental study was conducted to investigated the fluid flow and heat transfer around four circular cylinders of in-line in a cross flow of air. The local and average heat transfer characteristics for tube banks are investigated in the present study. Heat transfer in a heat exchanger usually involves convection in each fluid and conduction through the wall separating the two fluid. The in-line pitch ratio was in the range $1.5{\leq}L/d{\leq}4.0$, where L is the center distance and d the cylinder diameter, and in the Reynolds number $8,000{\leq}Re{\leq}50,000$. The local and mean Nusselt numbers were estimated. Subsequently, the heat transfer characteristics of four circular cylinders are found to exhibit a strong dependency upon the separation point of their upstream cylinders.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.19-27
• /
• 2001

Seismic parameters fur computation of ground motions in Southern Korea are obtained from recently recorded data, and site-independent regional and site-dependent local strong ground motions are predicted using efficient computational techniques. For the computation of ground motions, we devised an efficient procedure to compute site-independent $x_{q}$ and dependent $x_{s}$ values separately. The first step of this procedure is to use the coda normalization method far computation of site independent Q or corresponding $x_{q}$ value. The next step is the computation of $x_{s}$, values fur each site separately using the given $x_{q}$ value. For computation of ground motions the empirical Green's function (EGF) is modified to account fur the depth and distance variations of subevents on a finite fault plane using the theoritical Green's function. It is computed using wavenumber integration technique in layered media. The site dependent ground motions at seismic stations in southeastern local area were properly simulated using the modified empirical Green's function method in layered medium. The proposed method and procedures fur estimation of site dependent seismic parameters and ground motions could be efficiently used in the low and moderate seismicity regions.ons.s.ons.

• Journal of The Korean Astronomical Society
• /
• v.47 no.1
• /
• pp.1-13
• /
• 2014

We analyze the dependence of disk morphology (arm class, Hubble type, bar type) of nearby spiral galaxies on the galaxy environment by using local background density (${\Sigma}_n$), projected distance ($r_p$), and tidal index (T I) as measures of the environment. There is a strong dependence of arm class and Hubble type on the galaxy environment, while the bar type exhibits a weak dependence with a high frequency of SB galaxies in high density regions. Grand design fractions and early-type fractions increase with increasing ${\Sigma}_n$, $1/r_p$, and T I, while fractions of flocculent spirals and late-type spirals decrease. Multiple-arm and intermediate-type spirals exhibit nearly constant fractions with weak trends similar to grand design and early-type spirals. While bar types show only a marginal dependence on ${\Sigma}_n$, they show a fairly clear dependence on $r_p$ with a high frequency of SB galaxies at small $r_p$. The arm class also exhibits a stronger correlation with $r_p$ than ${\Sigma}_n$ and T I, whereas the Hubble type exhibits similar correlations with ${\Sigma}_n$ and $r_p$. This suggests that the arm class is mostly affected by the nearest neighbor while the Hubble type is affected by the local densities contributed by neighboring galaxies as well as the nearest neighbor.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1670-1677
• /
• 2000

An experimental investigation on heat transfer characteristics of two-dimensional heated blocks using a confined impinging slot jet has been performed. The effect of jet Reynolds number(Re=3900, 5800, 9700), streamwise block spacing(p/w=0.5, 1, 1.5) and dimensionless nozzle to block distance(H/B=1, 2, 4, 6) have been examined with five isothermally heated blocks. With the measurement of jet mean velocity and turbulence intensity distributions at nozzle exit, initially turbulent regimes, are classified. To clarify local heat transfer characteristics, naphthalene sublimation technique as used. The maximum Nusselt number at the stagnation point for the jet Reynolds number is occurred at H/B=4. Besides, the local and a average heat transfer of heated blocks increase with decreasing streamwise block spacing and increasing jet Reynolds number.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.3
• /
• pp.111-120
• /
• 2007

Recently, the small-scale local governments of japan are enlarging and enriching the service of health, medical and welfare facilities for the elderly . Intensive arrangement of the three types of facilities is one of the effective ways especially for the small-scale local governments. The service network between facilities benefits by the intensive arrangement. Benefits include the network of the medical service, the share of care information, the share of space and equipment. It can be a notable feature in the intensive arrangement that the elderly were taken from welfare facilities (especially dayscare center) to hospital of high movement frequency quickly. Instead of EV path as possible, It is desirable to stand close between facilities of high movement frequency. For large area, the heavy snow made low daycare ratio. Therefore, it is desirable to construct a branch office at a long distance.