• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.47-51
• /
• 2011

This paper analyzes the fatigue-life of welded joints using the notch stress approach. In the notch stress approach, the notch effects are usually approximated by introducing weld-bead parameters for the local detailed weld joints. The actual bead shape is complex and 3-dimensional. It may also greatly influence the fatigue strength. In this study, the welded shape was modeled using a 3D-scanner. The critical distance method was adopted in the evaluation of the fatigue effective notch stress for the weldments. Fatigue life tests were performed to verify the present method of fatigue life estimation for two types of welded plates with longitudinal attachments. The estimated results of the present methods were applied to the results of the experiment. The results of the analysis showed that the scatter of fatigue-life for the experimental data expressed in the nominal stress was significantly reduced by applying the effective fatigue stress of the present study.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.206-214
• /
• 2013

This paper proposes a new method for monitoring local voltage stability using the saddle node bifurcation set or loadability boundary in two dimensional power parameter space. The method includes three main steps. First step is to determine the critical buses and the second step is building the static voltage stability boundary or the saddle node bifurcation set. Final step is monitoring the voltage stability through the distance from current operating point to the boundary. Critical buses are defined through the right eigenvector by direct method. The boundary of the static voltage stability region is a quadratic curve that can be obtained by the proposed method that is combining a variation of standard direct method and Thevenin equivalent model of electric power system. And finally the distance is computed through the Euclid norm of normal vector of the boundary at the closest saddle node bifurcation point. The advantage of the proposed method is that it gets the advantages of both methods, the accuracy of the direct method and simple of Thevenin Equivalent model. Thus, the proposed method holds some promises in terms of performing the real-time voltage stability monitoring of power system. Test results of New England 39 bus system are presented to show the effectiveness of the proposed method.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.51-60
• /
• 2007

This paper presents an algorithm of optimal cutting tool selection for machining of the point-based surface that is defined by a set of surface points rather than parametric polynomial surface equations. As the ball-end and fillet-end mills are generally used for finish machining in a 3-axis computer numerical control machine, the algorithm is applicable for both cutters. The optimum tool would be as large as possible in terms of the cutter radius and/or corner radius which maximise (s) the material removal rate (i.e., minimise (s) the machining time), while still being able to machine the entire point-based surface without gouging any surface point. The gouging are two types: local and global. In this paper, the distance between the cutter bottom and surface points is used to check the local gouging whereas the shortest distance between the surface points and cutter axis is effectively used to check the global gouging. The selection procedure begins with a cutter from the tool library, which has the largest cutter radius and/or corner radius, and then adequacy of the point-density is checked to limit the accuracy of the cutter selection for the point-based surface within tolerance prior to the gouge checking. When the entire surface is gouge-free with a chosen cutting tool then the tool becomes the optimum cutting tool for a list of cutters available in the tool library. The effectiveness of the algorithm is demonstrated considering two examples.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.96-106
• /
• 2000

Though the recent years, large scale structures have been built on offshore for utilization of coastal ocean space as offshore airport and marine terminals. Sometimes, those big scale structures, however, happened to act as significant barriers against waves and severe beach erosion would take place on the coast. The present study deals nearshore topography changes affected by construction of an offshore structure with different distance from the shore. The series of three dimensional movable bed experiments have been examined in detail. Moreover, in order to make clear the relation of nearshore currents and local erosions behind offshore structure, the nearshore currents are calculated by Boussinesq equation model and compared with the same scale condition of the physical model experiments.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.913-916
• /
• 2020

In this paper, we propose the development of nitrogen cooling equipment for personalized local area. The proposed equipment consists of a cold air supply module, a body, and nitrogen injection with the following characteristics. First, it automatically controls the amount and time of cold air supply by utilizing information measuring skin temperature with volumetric temperature sensors, so it can have a competitive edge in function by ensuring complete safety. Second, if the distance measuring sensor is applied to the skin for more than a certain distance, it can block the cold air or control the discharge of nitrogen in conjunction with the control GUI to improve the efficiency of higher cooling therapy while providing safe management. Third, by installing a control module that can control the supply of nitrogen, the cost of maintenance can be minimized by minimizing the loss of nitrogen. Experiments at an external testing agency to evaluate the performance of the proposed equipment showed that the accuracy of the temperature sensor was measured in the range of ±3.8%, which is lower than the world's highest level(±5%), with a range of 110℃ to -160℃ similar to the world's highest level. Distance accuracy was measured in the range of ±3.0%, lower than the world's highest level(±5%), and weight accuracy in the range of ±0.1%, lower than the world's highest level(±5%). In addition, emission control was measured in four stages, higher than the world's highest level(stage 1) and nitrogen use was measured at 0.8L/min below the world's highest(6L/min). Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.450-458
• /
• 2018

The purpose of this study is to investigate the impact of university knowledge capital on the local business activity in the Korean local governments in the year 2015. We found that the increase of the standard deviation of university patent, scientific publications, incumbent firms, and industrial property rights raised the number of new knowledge-intensive firms to 15%, 11%, 54%, and 22%, respectively, in the local economy. In addition, the coefficient which reflects the interaction effects of the knowledge capital between universities and local industries was significant in the given area in the year. On the other hand, in the control variables, the coefficients for the size of local government, population density, and percentage of 20s~40s out of the total population in the local government were significant, showing above 90% level except for the variable of the distance between a local government and Seoul. In particular, when the knowledge capital of the university and industry coexists, the synergistic effect which has influence on the foundation of knowledge-intensive firms was meaningful despite the small scale, and these two types of knowledge capital could be complementary in creating new knowledge-intensive firms in the Korean local economy.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1372-1381
• /
• 2017

In this paper, a texture feature extraction method using local energy and local correlation of Gabor transformed images is proposed and applied to an image retrieval system. The Gabor wavelet is known to be similar to the response of the human visual system. The outputs of the Gabor transformation are robust to variants of object size and illumination. Due to such advantages, it has been actively studied in various fields such as image retrieval, classification, analysis, etc. In this paper, in order to fully exploit the superior aspects of Gabor wavelet, local energy and local correlation features are extracted from Gabor transformed images and then applied to an image retrieval system. Some experiments are conducted to compare the performance of the proposed method with those of the conventional Gabor method and the popular rotation-invariant uniform local binary pattern (RULBP) method in terms of precision vs recall. The Mahalanobis distance is used to measure the similarity between a query image and a database (DB) image. Experimental results for Corel DB and VisTex DB show that the proposed method is superior to the conventional Gabor method. The proposed method also yields precision and recall 6.58% and 3.66% higher on average in Corel DB, respectively, and 4.87% and 3.37% higher on average in VisTex DB, respectively, than the popular RULBP method.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.154-158
• /
• 2009

The vortex ventilation system (VV) which uses a rotating finned swirler installed coaxially with the exhaust duct is a very effective local ventilator. VV can enhance the capture depth by a factor of 3-5 compared to the conventional exhaust hood, in the absence of any solid walls nearby. In real situations there may exist ceiling, side wall and floor, all of which can affect the flow field and suction performance by way of the no-slip condition on the walls. 3D CFD simulation was performed in order to see the effect of the floor on the capture performance of the VV. The presence of floor reduced suction flow velocity, and increased the critical rotational speed which is the rotational speed required for stable vortex formation. Flow velocity profile along the axis could be well approximated by a universal functional form when the distance from the exhaust inlet is non-dimensionalized by the distance to the floor. Capture depth, define by the distance from the exhaust inlet to a point of velocity decreased to 10% of that at the inlet, is reduced by about 10% when the floor distance is 6 times the exhaust hood diameter.

• Journal of The Korean Astronomical Society
• /
• v.22 no.1
• /
• pp.63-79
• /
• 1989

Current estimates, based on the same star-count analysis, of the distance to the globule Bamard 361 range from 300 pc to 650 pc. All the problems associated with the estimates have been fully rectified in this study, and a modification has been made to the classical Wolf diagram to improve the accuracy in the distance determination. A reference field was carefully selected close to the globule but well outside the globule boundary, and star counts for this field were performed on the blue POSS plate in order to set up the reference magnitude sequence appropriate to the general area of B 361. From the reference sequence, the stellar density function has been derived specifically for the direction toward the globule. Correction was made for the general interstellar extinction, and the luminosity function with the Wielen's dip was adopted. The resulting density function clearly reveals the existence of the local Cygnus-Orion arm in the direction of B 361 at about 700 pc away from the Sun. Analysis of the star-count data for the program field locates the globule at distance $600{\pm}50$ pc ; thus, the globule is an object located in the Cygnus-Orion arm, residing somewhat toward its leading edge.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.202-205
• /
• 1998

X-ray absorption fine structure spectroscopic studies at the Ni K-edge have been performed for the Ni-Zn alloy coating layer on steel. The Ni-Zn interatomic distances and Debye-Waller factors were determined by fitting the experimental data with the theoretical spectra in the temperature range of 80 to 300K. The average Ni-Zn interatomic distance was found to be $2.557{\AA}$ and the variation of the Ni-Zn interatomic distance with temperature in this range was insignificant. From the comparison of the Ni-Zn interatomic distance with the nearest neighbor distance of pure Zn lattice it has been suggested that there is an apparent contraction around Ni atom.