• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권7호
• /
• pp.446-451
• /
• 2017

본 논문에서의 문맥의존 철자오류(Context-Sensitive Spelling Error) 교정 기법은 샤논(Shannon)의 노이지 채널 모형(noisy channel model)을 기반으로 한다. 논문에서 제안하는 교정 기법의 향상에는 보간(interpolation)을 사용하며, 일반적인 보간 방법은 확률의 중간 값을 채우는 방식으로 N-gram에 존재하지 않는 빈도를 (N-1)-gram과 (N-2)-gram 등에서 얻는다. 이와 같은 방식은 동일 통계 말뭉치를 기반으로 계산하는데 제안하는 방식에서는 통계 말뭉치와 교정 문서간의 빈도 정보를 이용하여 보간 한다. 교정 문서의 빈도를 이용하였을 때 이점은 다음과 같다. 첫째 통계 말뭉치에 존재하지 않고 교정 문서에서만 나타나는 신조어의 확률을 얻을 수 있다. 둘째 확률 값이 모호한 두 교정 후보가 있더라도 교정 문서를 참고로 교정하게 되어 모호성을 해소한다. 제안한 방법은 기존 교정 모형보다 정밀도와 재현율의 성능향상을 보였다.

• Asian Spine Journal
• /
• 제12권6호
• /
• pp.1053-1059
• /
• 2018

Study Design: Retrospective review. Purpose: To detect the effect of cannulated (poly-axial head) and solid (mono-axial head) screws on the local kyphotic angle, vertebral body height, and superior and inferior angles between the screw and the rod in the surgical management of thoracolumbar fractures. Overview of Literature: Biomechanics studies showed that the ultimate load, yield strength, and cycles to failure were significantly lower with cannulated (poly-axial head) pedicle comparing to solid core (mono-axial head). Methods: The medical charts of patients with thoracolumbar fractures who underwent pedicle screw fixation with cannulated or solid pedicle screws were retrospectively reviewed; the subjects were followed up from January 2011 to December 2015. Results: Total 178 patients (average age, $36.1{\pm}12.4years$; men, 142 [84.3%]; women, 28 [15.7%]) with thoracolumbar fractures who underwent surgery and were followed up at Hamad Medical Corporation were classified, based on the screw type as those with cannulated screws and those with solid screws. The most commonly affected level was L1, followed by L2 and D12. Surgical correction of the local kyphotic angle was significantly different in the groups; however, there was no significant difference in the loss of correction of the local kyphotic angle of the groups. Surgical correction of the reduction in the vertebral body height showed statistical significance, while the average loss of correction in the reduction of the vertebral body height was not significantly different. The measurement of the angles made by the screws on the rods was not significantly different between the cannulated (poly-axial head) and solid (mono-axial head) screw groups. Conclusions: Solid screws were superior in terms of providing increased correction of the kyphotic angle and height of the fractured vertebra than the cannulated screws; however, no difference was noted between the screws in the maintenance of the superior and inferior angles of the screw with the rod.

• 한국사회복지학
• /
• 제59권1호
• /
• pp.329-351
• /
• 2007

이 연구는 Beck(1991)이 제안한 오차교정모형(error correction models)을 이용하여 우리나라 기초지방정부의 사회복지비 지출비중의 변화를 분석하였다. 분석결과는 크게 네 가지로 요약된다. 첫째, 지역인구의 증가는 사회복지비 지출비중을 단기적으로 증가시킨다. 둘째, 노인인구비중이 높고 경제개발비 및 기존 사회복지비 지출비중이 낮을 경우, 장기적으로 기초지방정부의 사회복지비 지출비중이 커진다. 셋째, 우리나라에서 기초지방정부 사회복지비 지출비중의 변화에 대한 지방자치(지방선거)의 영향력은 분명하지 않다. 넷째, 어떤 기초지방정부의 사회복지비 지출비중의 수준과 성장률이 클 경우, 그것과 인접한 다른 기초지방정부의 사회복지비 지출비중이 장 단기적으로 크게 상승한다. 전체적으로, 본 연구의 분석결과는 우리나라 기초지방정부들의 사회복지비 지출비중의 변화가 각 지역의 내부정책 환경의 변화보다는 중앙 광역 기초지방정부간의 정치적 제도적 상호작용의 결과임을 시사한다.

• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1289-1297
• /
• 2006

Before other statistical data analysis the preprocessing steps should be performed adequately to have meaningful results. These steps include processes such as baseline correction, normalization, denoising, and multiple alignment. In this paper an algorithm for baseline correction is proposed with using the piecewise cubic Hermite interpolation with block-selected points and local minima after denoising for SELDI or MALDI mass spectrometry data.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.678-687
• /
• 2005

This paper describes a relative localization algorithm using odometry data and consecutive local maps. The purpose of this paper is the odometry error correction using the area matching of two consecutive local maps. The local map is built up using a sensor module with dual laser beams and USB camera. The range data form the sensor module is measured using the structured lighting technique (active stereo method). The advantage in using the sensor module is to be able to get a local map at once within the camera view angle. With this advantage, we propose the AVS (Aligned View Sector) matching algorithm for. correction of the pose error (translational and rotational error). In order to evaluate the proposed algorithm, experiments are performed in real environment.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.73-80
• /
• 2000

The distance correction term -logA0 of the local magnitude scale was estimated for earthquakes in southern Korea using linear least-squares inversion and interpolation scheme. Total 1054 short-period velocity seismograms from 107 local events recorded at hypocentral distances ranging from 10 to 480 km were used in this study. Simulated Wood-Anderson amplitudes were obtained from velocity seismograms with use of revised Wood-Anderson instrument response with static magnification 2080, damping factor 0.7, and natural period 0.8 sec. The estimated distance correction term for southern Korea is found to be -logA0=1.137 log(r/17) + 0.001159(r-17) + 20, where r is hypocentral distance in kilometers. The attenuation rate of this distance correction term falls between those of southern California and eastern North America.

• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.74-86
• /
• 2012

For the improvement of environmental comfort in the buildings with the blind control, the objective of this study is to prevent the direct glare caused by the daylight inlet. During the process of solar profile prediction, time are significant factors that may cause error and glare during the blind control. This research proposes and evaluates the correction and control method to minimize prediction error. For the local areas with different longitude and local standard meridian, error occurred in the process of the time conversion from local standard time to apparent solar time. In order to correct error in time conversion, apparent solar time should be recalculated after adjusting the day of year and the equation of time. To solve the problems by the potential time errors, control method is suggested to divide the control sections using the calibrated fitting-curve and this method is verified through simulations. The proposed correction and control method, which considered potential time errors by loop lop leap years, could solve the problems about direct glare caused by daylight inlet on the work-plane according to the prediction errors of solar profile. And also these methods could maximize daylight inlet and solar heat gain, because the blocked area on windows could be minimized.

• Journal of Chest Surgery
• /
• 제18권3호
• /
• pp.492-496
• /
• 1985

Two cases of surgical correction of funnel chest using metal struts were presented. The main procedures of the method were transverse submammary incision, subperichondrial resection of the deformed costal cartilages, division of the xiphisternal joint, wedge osteotomy of the sternum, freeing of the posterior surface of the sternum and stabilization by means of 2 metal struts. The struts were removed postoperative 3 and 6 months by a small incision under the local anesthesia. The results in both patients were satisfactory. This method of correction is simple, easy to perform and free of any operative risks.

• 한국멀티미디어학회논문지
• /
• 제19권5호
• /
• pp.837-847
• /
• 2016

Tone mapping for High Dynamic Range(HDR) image provides matching human visual perception between real world scene and displayable devices. Recently, a tone mapping algorithm based on localized gamma correction is proposed. This algorithm is using human visual properties of contrast and colorfulness with background intensity, generating a weight map for gamma correction. However, this method have limitations of controlling enhancement region as well as generating halo artifacts caused by the weight map construction. To overcome aforementioned limitations, proposed algorithm in this paper modifies previous weight map, considering base layer intensity of input luminance channel. By determining enhancement region locally and globally based on base layer intensity, gamma values are corrected accordingly. Therefore, proposed algorithm selectively enhances local brightness and controls strength of edges. Subjective evaluation using z-score shows that our proposed algorithm outperforms the conventional methods.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.429-431
• /
• 2010

The hybrid geoid model should be determined by fitting the gravimetric geoid to the geometric geoid which were presented the local vertical level. Therefore, it is necessary to find firstly the optimal scheme for improving the accuracy of gravimetric geoid in order to development the high-precision hybrid geoid model. Through finding the optimal scheme for determining the each part of gravimetric geoid, the most accurate gravimetric geoid model in Korea will be developed when the EIGEN-CG03C model to degree 360, 4-band spherical FFT and RTM reduction methods were used for determining the long, middle and short-frequency part of gravimetric geoid respectively. Finally, we developed the hybrid geoid model around Korea by correcting to gravimetric geoid with the correction term. The correction term is modelled using the difference between GPS/Levelling derived geoidal heights and gravimetric geoidal heights. The stochastic model used in the calculation of correction term is the LSC technique based on second-order Markov covariance function. 503 GPS/Levelling data were used to model the correction term. The degree of LSC fitting to the final hybrid geoid model in Korea was evaluated as 0.001m ${\pm}0.054m$.