• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.7
• /
• pp.109-117
• /
• 2019

Recently, child safety map making education has attracted attention as a way to reduce crimes against children. In Korea, the Ministry of Gender Equality and Family organized a child safety map making education program in 2011. The program's manual was revised in 2013 and the Ministry implemented it as a project to promote the rights of women and children. Child safety map making education aims to raise a child's understanding of their neighborhood, to have voluntary control and normal consciousness as a local inhabitant, to be aware of wrong behavior and crime, and to be part of creating a safe urban environment. However, when compared to educational programs in other major developed countries, the child safety map making education program in Korea currently does not improve a child's awareness of their surroundings. In this workshop study, we proposed and ran a new program to improve children's awareness of their environment based on the active participation of children in the existing safety map educational program. The workshop was held for 4 weeks for 48 students from 5th and 6th grade at Osan Daeho Elementary School. We analyzed this new program's effects with the following results. First, an analysis of the effects of the program on children's recognition of safe and dangerous spaces revealed that their understanding of these spaces increased by 30.4% after the workshop. The safety-related factor in the mind map key concept increased from 0.94 to 4.94, indicating that the children's perception of neighborhood risk and safety factors improved. Second, the analysis of the effects of the program on the children's coping ability in dangerous situations showed that their understanding of how to deal with dangerous situations increased by 11.3%. The children's understanding of facilities they could ask for help, such as police boxes and child safety guard houses, improved by 17.9%. Third, analysis of the effects of child safety map making education on children's understanding of their neighborhood, their perception of responsibility in the neighborhood, and their neighborhood attachment showed that these levels of children's understanding of the neighborhood improved by 6.0% after the workshop.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.49-60
• /
• 2020

The number of traffic control equipment installed to prevent traffic accidents increases every year due to continuous installation by the National Police Agency and local governments. However, it is installed based on qualitative judgment rather than engineering analysis results. The purpose of this study was to present additional installations in the future by presenting the installation criteria considering the severity of accidents for each road type and calculating the appropriate number of installations. ARI indicators that can indicate the severity of traffic accidents were developed, and road types were classified through analysis of variance and cluster analysis, and accident information by road type was analyzed to derive ARI of clusters with high traffic accident severity. The ARI values required to determine the installation of equipment for each road type were presented, and 5,244 additional installation points were analyzed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.61-66
• /
• 2020

Recently, a variety of electric anesthetics devices have been developed and used in clinical practice to reduce the fatigue of the operator during local anesthesia for dental procedures and to compensate for the disadvantages of manual anesthesia device. In this electric anesthesia injection device, the accurate and constant delivery of pressure for drug infusion is a very important performance factor. In order to evaluate the accuracy of the transfer pressure, a small pressure gauge using a load cell is often used, but since the elastic body inside the load cell may not be able to accommodate a sufficient displacement, an error may occur when evaluating pressure performance. For these reasons, in this study, we proposed and evaluated a silicon-chrome steel (Si-Cr steel) spring jig that can accommodate relatively large displacements that can be used when evaluating the performance of a pressure-controlled pressure application device using a load cell type pressure gauge. As a result of the pressure transmissibility test and repeated measurement results using a commercial dental anesthesia injection device, a more stable result was obtained when using a spring jig, and it was confirmed that the frequency of abnormally high measurement was reduced.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.25-33
• /
• 2020

To investigate the relationship between strain distribution and tensile properties of brittle material, five types of tensile coupon of carbon fiber reinforced polymer (CFRP) modified the tab portion in order to have a strain distribution including S0, SD1, SD2, SV1, SV2 were tested. The ultimate stress and strain of SD2 and SV2 which was intended to have larger strain distribution were smaller than those of SD1 and SV1, that was more clearly shown in the test results of the symmetric coupons (SV series) than the asymmetric coupons (SD series). In addition, the ultimate stress and strain of most coupons with strain distribution in this study were decreased when compared to the control group with uniform strain. These results were analyzed in various ways through 1) the average of the strain values directly measured by the strain gages, 2) the converted strain calculated by dividing the total deformation by the effective length, and 3) the ultimate effective strain derived from both the elastic modulus and the ultimate load. The values measured by strain gage indicates response of the local region precisely, but it does not represent the response from whole section. However, the converted strain and effective strain can supplement disadvantage of gage because they represent the average response of whole section. In particular, the effective strain can provide rupture strain conservatively, which can be utilized in practice, when the value obtained by strain gage was not effective due to gage damage or abnormal gage readings near ultimate load. This value provides a value that can be used even when partial rupture has occurred and is reasonably useful for specimens with strain distribution.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.77-87
• /
• 2021

Smart Factory refers to a factory that can be controlled by itself with an intelligent factory that improves productivity, quality and customer satisfaction by combining the entire process of manufacturing and production with digital automation solutions. The manufacturing industry around the world is rapidly changing, with Germany, Europe, and the United States at the center. In order to cope with such changes, the Korean government is also implementing a policy to spread the supply of smart factories for small and medium-sized companies, and related ministries and agencies such as the Ministry of Commerce, Industry and Energy, the Ministry of SMEs and Venture Business, the Korea Institute of Technology and Information Promotion, and local technoparks, as well as large companies such as Samsung, SK and LG are actively investing in smart manufacturing projects to support smart factories[1]. Factory Automation (FA) construction has many issues regarding the connection of heterogeneous equipment. The most difficult aspect of configuring various communications from various equipment is the reason. Although it may not be known if there are standards or products made up of the same company, it is not easy to build equipment that is old, up-to-date, and different use environments through a series of communications. To solve this problem, we would like to propose a method of communication using Modbus, one of FieldBus, which is one of the many industrial devices of PLC, a representative facility control system, and is used as a communication standard.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.395-408
• /
• 2021

In this study, we investigated the effects of wind speed and direction on building fires using GIS and a CFD model. We conducted numerical simulations for a fire event that occurred at an apartment in Ulsan on October 8, 2020. For realistic simulations, we used the profiles of wind speeds and directions and temperatures predicted by the local data assimilation and prediction system (LDAPS). First, using the realistic boundary conditions, we conducted two numerical simulations (a control run, CNTL, considered the building fire and the other assumed the same conditions as CNTL except for the building fire). Then, we conducted the additional four simulations with the same conditions as CNTL except for the inflow wind speeds and direction. When the ignition point was located on the windward of the building, strong updraft induced by the fire had a wide impact on the building roof and downwind region. The evacuation floor (15th floor) played a role to spread fire to the downwind wall of the building. The weaker the wind speed, the narrower fire spread around the ignition point, but the higher the flame above the building reaches. When the ignition point was located on the downwind wall of the building, the flame didn't spread to the upwind wall of the building. The results showed that wind speed and direction were important for the flow and temperature (or flame) distribution around a firing building.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.469-482
• /
• 2022

The purpose of this study is to analyze regional variation factors of hypertension treatment rate in COVID-19 based on the analysis results based on ecological methodology. To this end, data suitable for ecological analysis were collected from the Korea Centers for Disease Control and Prevention's regional health statistics, local government COVID-19 confirmed cases, National Health Insurance Corporation, Health Insurance Review and Assessment Service's welfare statistics, and Korea Transport Institute's traffic access index. Descriptive statistics and correlation analysis were conducted using SPSS Statistics 23 for regional variation and related factors in hypertension treatment rate, and geographical weighted regression analysis was conducted using Arc GIS for regional variation factors. As a result of the study, the overall explanatory power of the calculated geo-weighted regression model was 27.6%, distributed from 23.1% to 33.4% by region. As factors affecting the treatment rate of hypertension, the higher the rate of basic living security medical benefits, diabetes treatment rate, and health institutions per 100,000 population, the higher the rate of hypertension treatment, the lower the number of COVID-19 confirmed patients, the lower the rate of physical activity, and the alcohol consumption. Percentage of alcohol consumption decreased due to COVID-19 pandemic. It was analyzed that the lower the ratio, the higher the treatment rate for hypertension. Based on these results, the analysis of regional variables in the treatment rate of hypertension in COVID-19 can be expected to be effective in managing the treatment rate of hypertension, and furthermore, it is expected to be used to establish community-centered health promotion policies.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.615-627
• /
• 2021

The Baekildo fault, a dextral strike-slip fault developed in Baekil Island, Goheung-gun, controls the distribution of tuffaceous sandstone and lapilli tuff and shows a complex fracture system around it. In this study, we examined the spatial variation in the geometry and connectivity of the fracture system by using circular sampling and topological analysis based on a detailed fracture trace map. As a result, both intensity and connectivity of the fracture system are higher in tuffaceous sandstone than in lapilli tuff. Furthermore, the degree of the orientation dispersion, intensity, and average length of fracture sets vary depending on the along-strike variation in structural position in the tuffaceous sandstone. Notably, curved fractures abutting the fault at a high angle occur at a fault bend. Based on the detailed observation and analyses of the fracture system, we conclude as follows: (1) the high intensity of the fracture system in the tuffaceous sandstone is caused by the higher content of brittle minerals such as quartz and feldspar. (2) the connectivity of the fracture system gets higher with the increase in the diversity and average length of the fracture sets. Finally, (3) the fault bend with geometric irregularity is interpreted to concentrate and disturb the local stress leading to the curved fractures abutting the fault at a high angle. This contribution will provide important insight into various geologic and structural factors that control the development of fracture systems around faults.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.4
• /
• pp.558-571
• /
• 2022

Objective : The primary objective of this study was to identify predicting factors for local control (LC) of atypical meningioma, and we validated them with comparing the predicting factors for recurrence-free survival (RFS). We also examined the rate of LC after surgical resection with or without adjuvant treatment and RFS. Methods : Clinical and radiological records of patients with atypical meningiomas diagnosed at two institutes from January 2000 to December 2018 were reviewed retrospectively. Histopathological features were also reviewed using formalin-fixed paraffin embedded samples from pathological archives. Results : Of the 99 atypical meningiomas eligible for analysis, 36 (36.4%) recurred during the follow-up period (mean, 83.3 months; range, 12-232 months). The rate of 3-year LC and 5-year LC was 80.8% and 74.7%, respectively. The mean time-to-recurrence was 49.4 months (range, 12-150). The mean RFS was 149.3 months (95% confidence interval, 128.8-169.8 months) during the mean follow-up duration of 83.3 months (range, 12-232 months). Multivariate analysis using Cox proportional-hazard regression model showed that the extent of resection (hazard ratio [HR], 4.761; p=0.013), Ki67 index (HR, 8.541; p=0.004), mitotic index (HR, 3.275; p=0.044), and tumor size (HR, 3.228; p=0.041) were independently associated with LC. These factors were also statistically associated with RFS. In terms of radiotherapy after surgical resection, the recurrence was not prevented by immediate radiotherapy because of the strong effect of proliferative index on recurrence. Conclusion : The present study suggests that the extent of resection, proliferative index (according to Ki67 expression) and mitotic index, and tumor size are associated with recurrence of atypical meningiomas. However, our results should be further validated through prospective and randomized clinical trials to overcome the inborn bias of retrospective nature of the study design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.963-969
• /
• 2021

The wind data measured from local meteorological masts is used to evaluate wind speed distribution and energy production in the specified site for wind farm However, wind data measured from meteorological masts often contain missing information or insufficient desired height or data length, making it difficult to perform wind turbine control and performance simulation. Therefore, long-term continuous wind data is very important to assess the annual energy production and the capacity factor for wind turbines or wind farms. In addition, if seasonal influences are distinct, such as on the Korean Peninsula, wind data with seasonal characteristics should be considered. This study presents methodologies for generating synthetic wind that take into account fluctuations in both wind speed and direction using the hidden Markov model, which is a statistical method. The wind data for statistical processing are measured at Maldo island in the Kokunnsan-gundo, Jeonbuk Province using the Automatic Weather System (AWS) of the Korea Meteorological Administration. The synthetic wind generated using the hidden Markov model will be validated by comparing statistical variables, wind energy density, seasonal mean speed, and prevailing wind direction with measurement data.