• Structural Engineering and Mechanics
• /
• v.14 no.3
• /
• pp.287-306
• /
• 2002

The assessment of structural performance of transfer structures under potential seismic actions is presented. Various seismic assessment methodologies are used, with particular emphasis on the accurate modelling of the higher mode effects and the potential development of a soft storey effect in the mega-columns below the transfer plate (TP) level. Those methods include response spectrum analysis (RSA), manual calculation, pushover analysis (POA) and equivalent static load analysis (ESA). The capabilities and limitations of each method are highlighted. The paper aims, firstly, to determine the appropriate seismic assessment methodology for transfer structures using these different approaches, all of which can be undertaken with the resources generally available in a design office. Secondly, the paper highlights and discusses factors influencing the response behaviour of transfer structures, and finally provides a general indication of their seismic vulnerability. The representative Hong Kong building considered in this paper utilises a structural system with coupled shear walls and moment resisting portal-frames, above and below the TP, respectively. By adopting the wind load profile stipulated in the Code of Practice on Wind Effects: Hong Kong-1983, all the structural members are sized and detailed according to the British Standards BS8110 and the current local practices. The seismic displacement demand for the structure, when built on either rock or deep soil sites, was determined in a companion paper. The lateral load-displacement characteristic of the building, determined herein from manual calculation, has indicated that the poor ductility (brittle nature) of the mega-columns, due mainly to the high level of axial pre-compression as found from the analysis, cannot be effectively alleviated solely by increasing the quantity of confinement stirrups. The interstorey drift demands at lower and upper zones caused by seismic actions are found to be substantially higher than those arising from wind loads. The mega-columns supporting the TP and the coupling beams at higher zones are identified to be the most vulnerable components under seismic actions.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.6
• /
• pp.525-536
• /
• 2015

An experimental study was performed to investigate the axial-flexural load-carrying capacity of concrete-encased and-filled steel tube (CEFT) columns. To restrain local buckling of longitudinal bars and to prevent premature failure of the thin concrete encasement, the use of U-cross ties was proposed. Five eccentrically loaded columns were tested by monotonic compression. The test parameters were axial-load eccentricity, spacing of ties, and the use of concrete encasement. Although early cracking occurred in the thin concrete encasement, the maximum axial loads of the CEFT specimens generally agreed with the strengths predicted considering the full contribution of the concrete encasement. Further, due to the effect of the circular steel tube, the CEFT columns exhibited significant ductility. The applicability of current design codes to the CEFT columns was evaluated in terms of axial-flexural strength and flexural stiffness.

• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.227-236
• /
• 2020

Expansive soils are renowned for their swelling-shrinkage property and these volumetric changes resultantly cause huge damage to civil infrastructures. Likewise, subgrades consisting of expansive soils instigate serviceability failures in pavements across various regions of Pakistan and worldwide. This study presents the use of polypropylene fibers to improve the engineering properties of a local swelling soil. The moisture-density relationship, unconfined compressive strength (UCS) and elastic modulus (E₅₀), California bearing ratio (CBR) and one-dimensional consolidation behavior of the soil treated with 0, 0.2, 0.4, 0.6 and 0.8% fibers have been investigated in this study. It is found that the maximum dry density of reinforced soil slightly decreased by 2.8% due to replacement of heavier soil particles by light-weight fibers and the optimum moisture content remained almost unaffected due to non-absorbent nature of the fibers. A significant improvement has been observed in UCS (an increase of 279%), E₅₀ (an increase of 113.6%) and CBR value (an increase of 94.4% under unsoaked and an increase of 55.6% under soaked conditions) of the soil reinforced with 0.4% fibers, thereby providing a better quality subgrade for the construction of pavements on such soils. Free swell and swell pressure of the soil also significantly reduced (94.4% and 87.9%, respectively) with the addition of 0.8% fibers and eventually converting the medium swelling soil to a low swelling class. Similarly, the compression and rebound indices also reduced by 69.9% and 88%, respectively with fiber inclusion of 0.8%. From the experimental evaluations, it emerges that polypropylene fiber has great potential as a low cost and sustainable stabilizing material for widespread swelling soils.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.4
• /
• pp.935-941
• /
• 1997

Mediastinal fibrosis is pathologically characterized by chronic inflammation and fibrosis of mediastinal soft tissue. Mediastinal fibrosis is local expression of a family of systemic fibrosing syndroms. This can result in compression of adjacent mediastinal structures. Idiopathic fibrosing syndromes include retroperitoneal fibrosis, sclerosing cholangitis of the orbit and fibrosis of the thyroid gland(Riedel's struma). The cause of these disorders is obscure, in some instance there is an underlying malignancy, infection, history of drug ingestion, or trauma with retroperitoneal bleeding. Treatment of mediastinal fibrosis depends on structures involved by the fibrotic process. The disease is self limited in most case or improved by steroids uses. We experienced a case of idopathic sclerosing mediastinitis with orbital fibrous dysplasia of unknowm cause, which was confirmed by open lung biopsy, so reported it with a review of literature.

• The Korean Journal of Pain
• /
• v.9 no.2
• /
• pp.407-411
• /
• 1996

Stereotactic radiofrequency dorsal root ganglionotomy can be very useful procedures for the treatment of pain emanating from the lumbar segmental nerves. This procedure is reserved for patients who have failed conservative interventional treatments and in whom open surgical intervention is not an option. The advantages of the radiofrequency lesion method are presented, excellent control of the lesion process using temperature monitoring to quantify the lesion size, prevent boiling, and to produce differential destruction of neural tissue. The afferent fibers in the ventral root which are spared by dorsal rhizotomy but nerve fibers with their cells in the ganglion from either dorsal or ventral root can be destructed with stereotactic radiofrequency ganglionotomy. This technique is performed using a 100 mm cannula with a 5 mm active tip. Repeated lateral fluoroscopic view should be taken to make sure that cannlua still resides within the superior, dorsal quadrant or the foramen. With the cannula in this position, electrostimulation is performed and good paresthesia on the leg should be noted with 0.3 and 0.5 volt at 50 Hz stimulation. At 2Hz stimulation distinct dissociation between motor and sensory should be shown. Percutaneous lumbar ganglionotomy have carried out under local anesthesia on inpatient basis in 6 patients. A series of 5 patients with metastatic cancer pain and a patient with compression fracture have been relieved of pain without serious complications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.827-834
• /
• 2020

In this paper, a third-order harmonic mixer is designed using frequency multiplier theory for the microwave airborne radar. Unlike the basic mixer design method, the gate bias voltage, at which the third-harmonic component of the Local frequency (LO) is the maximum, is selected using a frequency multiplier theory to maximize the third-harmonic mixing component at the intermediate frequency (IF). The proposed harmonic mixer was designed and manufactured using a commercial GaAs MESFET device in a plastic package, and it was possible to improve the high conversion loss, circuit complexity, high cost, and manufacturing complexity of the existing microwave mixer. The harmonic mixer using the proposed design method has a -8 ~ -10 dB conversion loss by pumping 11.5 GHz LO with a +5 dBm level when operating from 33.0 GHz to 36.0 GHz and the 1-dB gain compression point (P1dB) of 0 dBm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.117-126
• /
• 2016

In this study, a new meta-heuristic optimization algorithm, Vision Correction Algorithm (VCA), designed according to the optical properties of glasses was developed. The VCA is a technique applying optometry and vision correction procedure to optimization algorithm through the process of myopic/hyperopic correction-brightness adjustment-compression enforcement-astigmatism adjustment. The proposed VCA unlike the conventional meta-heuristic algorithm is an automatically adjusting global/local search rate and global search direction based on accumulated optimization results. The proposed algorithm was applied to the representative optimization problem (mathematical and engineering problem) and results of the application are compared with that of the present algorithms.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.213-219
• /
• 2007

Glass-to-metal contact should be prevented in the design of any structural glass component. Because glass is extremely brittle and will fracture readily if even a small point load is applied. If the assembly includes a glass component supported by metallic structure, designers should provide a pliable interface of some kind between the two parts. But there happens high demand of glass-to metal contact in semiconductor industries due to adoption of dry cleaning process as one of the good solution to reduce running cost - carry out equipments cleaning with high corrosive and etching gas such as CF4 with keeping process temperature as the same as high service temperature. Therefore the quartz glass have to be received compression by direct contact with metal as the form of weight itself and vacuum pressure and fatigue by vibrations caused by process during the process. In this paper investigation will be carried out on fracture behavior of quartz glass contacted with metal directly under local load and fatigue given by process vibration with apparatus which can give $lox{\backslash}cal$ load and vibration through PZT ceramics to give guideline to prevent unintended fracture of quartz glass.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1254-1259
• /
• 2010

In this paper, Low Computational Adaptive Expanded Block Search Motion Estimation Method is proposed. Proposed method classifies ME blocks as Average Motion Block(AMB) and Local Motion Block(LMB) according to correlation of reference frame. It could reduce the computational complexity with performing Modified Fast Search(MFS). And accuracy of MV is also increased by 4 sub-blocks on LMB and Block Expansion(BE). The experimental results show that the proposed method has better performance that increased 1.8dB than Diamond Search and 0.6dB than Full Search with 7.5 % computation of Full Search. The proposed method could be applied to video compression and Frame Rate Conversion(FRC).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.117-120
• /
• 2007

It has able to be possible that expression and store visual image from analog to digital without picture quality damaged via improvement of video compression technology. And also, It is possible to broadcasting digital image via transmission of digital image on MPEG-2 standardization. for this reason, the broadcasting business owners have converted broadcasting service from analog to digital. But, local SO(System Operator) has a difficult point which secure HD(High Definition) broadcasting program. In this paper, we designed and implemented Scheduling System for MPEG-2 Digital broadcasting which gather HD broadcasting program from major broadcasting business owners(as like MBC, KBS, SBS, etc) and broadcast them.