• The Korean Journal of Pain
• /
• v.7 no.2
• /
• pp.205-210
• /
• 1994

The effects of either clonidine or epinephrine into local anesthetics administered into brachial plexus sheath were evaluated in 42 patients who underwent surgery of the upper limb. All patient received 0.5 ml/kg of 2:1 mixture of bupivacaine and lidocaine injected into the brachial plexus sheath, using the subclavian perivascular technique. The patients were randomly allocated into two groups; Group I(n=25) received $150{\mu}g$ of clonidine hydrochloride, and Group II(n=27) received $200{\mu}g$ of epinephrine. The duration of analgesia and the degree of sedation reflecting the systemic effect of clonidine were assessed. The block produced by the addition of clonidine was longer($100.3{\pm}469.8$ vs $648.8{\pm}192.1$ min) and superior to that by epinephrine(p < 0.05). The highest degree of sedation was achieved about 20 minutes after block, which roughly equals the time required for intramuscular clonidine to show the similar effect. The author concludes that the injection of clonidine mixed to local anesthetics into the brachial plexus sheath prolongs analgesia than that of epinephrine, but this prolongation may be due to the systemic effect of clonidine.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.241-252
• /
• 1998

The objective of the research stated herein is to observe the actual responses of a low-rise nonseismic moment-resisting reinforced concrete frame subjected to varied levels of earthquake ground motions. First, the reduction scale for the model was determined as 1 : 5 considering the capacity of the shaking table to be used and the model was manufactured according to the similitude law. This model was, then, subjected to the shaking table motions simulating Taft N21E component earthquake ground motions, whose peak ground accelations (PGAs) were modified to 0.12g, 0.2g, 0.3g, and 0.4g. The lateral accelerations and displacements at each story and local deformations at the critical reginos of the structure were measured. The base shear was measured by using self-made load cells. Before and after each earthquake simulation test, free vibration tests were performed to find the change in the natural period and damping ratio of the model. The test data on the global and local behaviors are interpreted. The model showed the linear elastic behavior under the Taft N21E motion with the PGA if 0.12g, which represents the design earthquake in Korea. The maximum base shear was 1.8tf, approximately 4.7 times the design base shear. The model revealed fairly good resistance to the higher level of earthquake simulation tests. The main components of its resistance to the high level of earthquakes appeared to be 1) the high overstrength, 2) the elongation of the fundamental period, and 3) the minor energy dissipation by inelastic deformations. The drifts of the model under these tests were approximately within the allowable limit.

• Transactions of Materials Processing
• /
• v.23 no.5
• /
• pp.317-322
• /
• 2014

Bursting during tube hydroforming is preceded by localized necking. The retardation of the initiation of necking is a means to enhance hydroformability. Since high strain gradients occur at the necking sites, a decrease in local strain gradients is an effective way to retard the initiation of necking. In the current study, the expansion at potential necking sites was intentionally restricted in order to reduce the strain gradient at potential necking sites. From the strain distribution obtained from FEM, it is possible to determine strain concentrated zones, which are the potential necking sites. Prior to the hydroforming of a trailing arm, an incompressible material(such as lead) is attached to the tube where the strain-concentrated zone would contact the die. Due to the incompressibility of lead, the tube expansion is locally restricted, and the resultant strain extends to adjacent regions of the tube during hydroforming. After the first stage of hydroforming, the lead is removed from the tube, and the hydroforming continues to the final targeted shape without any local restriction. This method was successfully used to fabricate a complex shaped automotive trailing arm that had previously failed during traditional hydroforming fabrication.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.249-252
• /
• 1998

ETSI(European Telecommunications Standards Institute) 300 34701, ITU-T(International Telecommunication Union) G.965 recommended PSTN, CONTROL, LINK CONTROL, BCC, PROTECTION protocols on V-Interfaces. But it is possible to occur misalignment between LE(Local Exchange) and AN(Access Network), especially in link identification procedure because there isn't any comment about V5.2 system management. In this paper we propose S/W guard timer to improve reliability in V5.2 link identification procedure in scope of Recommendation.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.25-29
• /
• 1995

In order to obtain the basic information on cross breeding of peony, the growth and floral characteristics were investigasted for local collected strains in main cultvation area in Korea. Local peony strains were classified by early emergence lines and late emergence lines according to the emergence date. Flower color of single-petaling flower was varied with red, pink and white, on the other hand, red+red, pink+white, pink+red and pink+pink in double-petaling flower. Number of pistil of the most local peony strains was 3-4/flower, number of stamen was varied from 0 to more than 200 ea/flower, classifing by 4 groups according to the diameter of flower. Most of the cross combinations showed the cross comptibility, and number of follicle was 3-5 ea/flower, average number of seed was 15.6 ea/follicle, seed size was grouped : by small grains with less than 10g, medium grains with 10-15g and large grains with more than 15g of 100 seed weight.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.129-140
• /
• 2021

The next generation mBcN should be built to cooperate with the wireless network to support hyper-speed and hyper-connectivity. In this paper, we propose a network architecture for the cooperation mBcN and 5G commercial network and architecture of the cooperative security gateway required for the cooperation. The proposed cooperative security gateway is between gNB and UPF to support LBO, SFC, and security. Our analysis shows that the proposed architecture has several advantages. First of all, user equipment connected with the mBcN can be easily connected through the 5G commercial radio network to the mBcN. Second, the military application traffic can be transmitted to mBcN without going through the 5G core network, reducing the end-to-end transmission delay without causing the traffic load on the 5G core network. In addition, the security level of the military application can effectively be maintained because the user equipment can be connected to the cooperative security gateway, and the traffic generated by the user equipment is transmitted to the mBcN without going through the 5G core network. Finally, we demonstrate that LBO, SFC, and security modules are essential functions of the proposed gateway in the 5G test-bed environment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.25 no.4
• /
• pp.304-310
• /
• 1999

This study was designed to find the effect of Minocycline loaded microcapsule applied locally to tissue by measuring drug concentration in tissue and serum by HPLC and to achieve optimal drug delivery system and duration to a specific target site. Control group were administrated minocycline intramuscularly twice a day with $0.2{\mu}g/100g$ for 1 to 10 days. In experimental group, surgical wound was created on Rt. cheek and then minocycline loaded microcapsule was applied into the space between superficial and deep layer of masseter muscle. Animals were sacrificed at 1, 3, 5, 7, 10 days after initial administration, blood was obtained from heart and right masseter muscle was excised. Blood sample was centrifuged at 3000rpm for 15min. Tissue sample was homogenized, left at room temperature for 48hr and centrifuged at 4000g for 5min. Supernatant was completely dried and dissolved in distilled water. Analysis was conducted using a ${\mu}Bondapack$ C18 column. The mobile phase was 0.2M Ammonium Oxalate/0.1M EDTA/DMF=11/4/5 solution, which was injected into the column and detected with photodiode detector at 344nm wavelength. The results were as follows : 1. This method was reliable, could be replicated and suitable for minocycline analysis in tissue as well as serum. 2. In tissue, concentration of minocycline of experimental group was higher than that of control group for 5days. 3. Except 1 day, concentration of minocycline in serum of experimental group was lower than that of control group. 4. Concentration of minocycline in tissue was much higher than that in serum. From these results, minocycline loaded microcapsule might be effective tool for local drug delivery system might be useful for treatment of infections of oral and maxillofacial region and management of infected surgical wound, minimizing systemic effects.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.527-537
• /
• 1995

The effect of calcitonin gene-related peptide (CGRP), substance P (SP) and electrical stimulation of the tooth on the intradental nerve activtiy (INA) was investigated in anesthetized cats. The INA was recorded from single pulp nerve units dissected from the inferior alveolar nerve under stereomicroscope. The INA elicited by 3 minute application of 4M NaCl in deep dentinal cavity was compared before and after stimulation at 10 minute intervals. The magnitude of INA was calculated as the total number of nerve impulses produced in given period, and the changes of INA are expressed as % of control INA. The results obtained were as follows. 1. 16 single pulp nerve units were classified as 14 $A{\delta}$-fibers (3.4~19.4m/sec) and 2-fibers (1.5~1.7m/sec) according to the conduction velocity. 2. 4M NaCl evoked an irregular bursts of spikes which continued until washing out. Isotonic saline did not affect INA to subsequent applications of the hypertonic NaCl solution (P>0.05). 3. Local application of CGRP ($200{\mu}g$/ml) in deep dentinal cavity reduced the INA induced by 4M NaCl in $A{\delta}$-fiber units (P<0.01) and some units of those responded to CGRP during application. 4. Local application of SP ($100{\mu}g$/ml) in deep dentinal cavity reduced the INA induced by 4M NaCl in AS-fiber units (p<0.05), but increased the INA in C-fiber unit coincided with large reduction of the INA of $A{\delta}$-fiber units. 5. Monopolar electrical stimulation applied to the crown at intensities high enough to excite C-fibers (12V, 5ms, 10Hz, 10~30min) decreased the INA in $A{\delta}$-fiber units (P<0.01) and systemic pretreatment with phenoxybenzamine (3mg/kg, i.v.) enhanced this inhibitory effect (P<0.01). On the contrary, electrical stimulation increased the INA in C-fiber unit.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.336-341
• /
• 2018

In this paper, we designed and implemented an ultra wideband (UWB) antenna with 5G mobile communication and WLAN bands rejection characteristics. The proposed antenna consists of a planar radiation patch with two slots, parasitic elements on both sides of the strip line and ground plane on back side. The upper n-type slot contributes for 5G mobile communication band (3.42~3.70 GHz) rejection and the lower n-type slot contributes for wireless local area network (WLAN) band (5.15~5.825 GHz) rejection. Parasitic elements were used in order to satisfy the voltage standing wave ratio (VSWR) less than or equal to 2.0 for UWB band (3.10~10.60 GHz) except two rejection bands. The Ansoft's high frequency structure simulator (HFSS) was used for antenna design and simulations. The simulated antenna showed dual rejection bands of 3.36~3.71 GHz and 5.13 ~ 5.92 GHz in UWB band, and measured result for the implemented antenna showed dual rejection bands of 3.40~3.72 GHz and 5.08~5.858 GHz. Simulated and measured VSWRs are less than or equal to 2.0 for all UWB band except dual rejection bands.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.22-27
• /
• 2020

With the deployment of 5G infrastructure, content delivery network (CDN) will be a key role to provide explosive growing services for the independent media and YouTube which contain high-speed mobile contents. Without a local cache, the mobile backhaul and fronthaul should endure huge burden of bandwidth request for users as the increase number of direct accesses from contents providers. To deal with this issue, this paper fist presents both fronthaul solutions for CDN that use dark fibers and a passive optical network (PON). On top of that, we propose the aggregated content request specialized for PON caching and evaluate and compare its performance to legacy schemes through the simulation. The proposed PON caching scheme can reduce average access time of up to 0.5 seconds, 1/n received request packets, and save 60% of backhaul bandwidth compared to the no caching scheme. This work can be a useful reference for service providers and will be extended to further improve the hit ratio of cache in the future.