• Structural Engineering and Mechanics
• /
• v.33 no.1
• /
• pp.79-93
• /
• 2009

This paper investigates the possibility of controlling the response of typical portal frame structures to blast loading using a combination of semi-active and passive control devices. A one storey reinforced concrete portal frame is modelled using non-linear finite elements with each column discretised into multiple elements to capture the higher frequency modes of column vibration response that are typical features of blast responses. The model structure is subjected to blast loads of varying duration, magnitude and shape, and the critical aspects of the response are investigated over a range of structural periods in the form of blast load response spectra. It is found that the shape or length of the blast load is not a factor in the response, as long as the period is less than 25% of the fundamental structural period. Thus, blast load response can be expressed strictly as a function of the momentum applied to the structure by a blast load. The optimal device arrangements are found to be those that reduce the first peak of the structural displacement and also reduce the subsequent free vibration of the structure. Semi-active devices that do not increase base shear demands on the foundations in combination with a passive yielding tendon are found to provide the most effective control, particularly if base shear demand is an important consideration, as with older structures. The overall results are summarised as response spectra for eventual potential use within standard structural design paradigms.

• Journal of Biosystems Engineering
• /
• v.15 no.3
• /
• pp.207-218
• /
• 1990

Grains display characteristics of both elastic bodies and viscous fluids when they are subjected to mechanical treatments in harvesting, handling, and processing. This viscoelastic behavior of grains when mechanically stressed must be fully understood to establish maximum machine efficiency and have a minimum degree of grain damage and the highest quality of the final product. The studies were conducted to examine the effect of the moisture content, the loading rate and the initial deformation on the stress relaxation behavior of whole kernel of rough rice, and develop the rheological model to represent its stress relaxation behavior. The following results were obtained from the study. 1. Moisture content had the greatest influence on the initial portion of the relaxation curve. With elapsing time the lower moisture content resulted in the lower residual stress for the Japonica-type rough rice and vice versa for the Indica-type rough rice. But within the ranges of moisture content tested, the degree of stress relaxation per unit strain on the Indica-type rough rice was a little higher than those on the Japonica-type rough rice. 2. The slower loading rate resulted in less initial stress. The decreasing trend of residual stress for all the samples tested with increasing loading rate was shown. 3. The higher initial deformation for all the samples resulted in less initial stress. The increasing of amount of stress relaxation per unit strain with increase of initial stress indicated that viscoelastic properties of rough rice depended not only upon duration of load applied but also initial stress applied. This means that rough rice is nonlinear viscoelastic material. 4. The compression stress relaxation properties of rough rice kernel can be described by a generalized Maxwell model representing by the Maxwell elements.

• Journal of Biomedical Engineering Research
• /
• v.39 no.3
• /
• pp.109-115
• /
• 2018

Obesity is a worldwide disease caused by the excessive proliferation of adipocytes. Multiple factors, including melatonin and physical loading, are involved in the control of obesity. Melatonin has been shown to induce apoptosis on preadipocytes while physical loading such as fluid shear stress (FSS) affects the proliferation and differentiation of adipocytes. Here, we studied the combined effects of melatonin and FSS on 3T3-L1 preadipocytes. For physical loading, preadipocytes were stimulated with a maximum dynamic fluid shear stress of 1 Pa at 1 Hz for 2 hours with/without melatonin. The experiment conditions were divided into four groups: (1) control, (2) 1 mM melatonin treatment, (3) FSS, and (4) combined 1 mM melatonin and FSS. All groups had a fixed duration time of 2 hours. ERK, p-ERK, COX-2, $C/EBP{\beta}$, $PPAR{\gamma}$, osteopontin, Bax, caspase-3 and caspase-8 proteins were assessed by Western blot analysis. GAPDH was used as a control. Results showed that combined melatonin and FSS treatment activated the ERK/MAPK pathway but not COX-2. Furthermore, combined melatonin and FSS treatment significantly decreased $C/EBP{\beta}$ and $PPAR{\gamma}$ compared to other groups. However, caspase-3 and caspase-8 did not result in significant changes. In summary, combined melatonin and FSS appears to have the potential to inhibit adipogenesis and treat obesity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1082-1088
• /
• 2001

Nowadays study on recycling disused plastics for automobiles was lively progressed. Rubber and talcum powder was added to retrieve degradation of physical properties caused by recycling disused polypropylene. The effect of the temperature, the fatigue load and the loading speed on DEN(double edged notch) specimen which was made by the pp-rubber composites during fracture was studied by. DEN specimen was made on PP-rubber composites through the injection molding. With increasing temperature the fracture strength was linearly decreased and the fracture energy was increased by $0^{\circ}C$ and after that decreased. In the same temperature the fracture strength during increasing the notch radius was hardly increased. The fracture behaviour at low and high loading speed was different entirely. At high loading speed plastic region was small and fracture behaviour was seen to brittle fracture tendency. With increasing fatigue load fracture energy was first rapidly decreased and subsequently steady when radius of notch tip was 2mm, but Maximum load during fracture scarcely varied. The deformation mechanism of polypropylene-rubber composites during fracture was studied by SEM fractography. A strong plastic deformation of the matrix ahead of the notch/crack occurred. The deformation seem to be enhanced by a thermal blunting of the notch/crack.

• The Korean Journal of Physiology
• /
• v.10 no.2
• /
• pp.29-37
• /
• 1976

Effect of furosemide administration on glucose tolerance, insulin-and HGH response following parenteral glucose loading was studied in healthy subjects. Effects of potassium or calcium on the furosemide induced changes were also observed in the same subjects. Furosemide administration resulted in a considerable reduction in the magnitude and duration of insulin response although no obvious changes were observed in glucose disappearance from the circulation. Oral potassium or calcium supplement to the furosemide treated subjects showed a reversion toward normal of the insulin response. The author suggested that a decreased endogenous insulin production resulting from the potassium and/or calcium depletion is responsible for the changes observed. In those subjects who receive parenteral nutrition if administration of furosemide is essential, it should be supplemented by potassium and/or calcium.

• Journal of Korean Society on Water Environment
• /
• v.24 no.3
• /
• pp.297-305
• /
• 2008

It is necessary to select proper reduction methods and to calculate reasonably reduction amount for making good practice of the reduction scheme. Moreover, it is suggested that the reduction amount have to be distributed properly during the planning period. In other words, it has not to be concentrated on the specific year (especially final year of the planning period). The reason why, if the reduction amount concentrate on the final year of the planning period, allotment loading amount could not be achieved in some cases (e.g., insufficiency of budget, extension of construction duration). Even though much of the budget have been supported from national treasury (about 50%), it is thought the role of the local government must be strengthened gradually.

• International Journal of Reliability and Applications
• /
• v.17 no.1
• /
• pp.21-49
• /
• 2016

Many mechanical, electrical and electronic products have more than one performance characteristics (PCs). For example the performance degradation of rubidium discharge lamps can be characterized by the rubidium consumption or the decreasing intensity the lamp. The product may degrade due to all the PCs which may be independent or dependent. This paper deals with the design of optimal bivariate step-stress partially accelerated degradation test (PADT) with degradation paths modelled by gamma process. The dependency between PCs has been modelled through Frank copula function. In partial step-stress loading, the unit is tested at usual stress for some time, and then the stress is accelerated. This helps in preventing over-stressing of the test specimens. Failure occurs when the performance characteristic crosses the critical value the first time. Under the constraint of total experimental cost, the optimal test duration and the optimal number of inspections at each intermediate stress level are obtained using variance optimality criterion.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.33-44
• /
• 1999

An energy balance procedure is developed to incorporate the effects of earthquake duration which involves the effect of cyclic loading and the corresponding cumulative plastic deformation. Particular emphasis is given to the flexural failure of non-seismically designed columns of reinforced concrete frames. For this, conceptual strength deterioration models for columns, governed by concrete, anchorage failure and longitudinal steel fracture due to low-cycle fatigue, are proposed. It is evident that the energy-based method has good agreement with the experimental data and is able to predict the failure mode.

• Asian Journal of Business Environment
• /
• v.4 no.3
• /
• pp.5-12
• /
• 2014

Purpose - This study is aimed at examining Indian consumers' online shopping motivations, information search, and shopping intentions. The study intends to reveal the relationship between online shopping motivations, information search, and shopping intentions. Research design, data, and methodology - The study employs factor analysis to verify correct loading of items on corresponding factors, and to confirm the applicability of constructs in the Indian context. The model was verified using stepwise regression analysis. Results -The findings show that hedonic and utilitarian motivations significantly affect online information search and shopping intentions. The information search is a significant predictor of online purchase intention. Conclusions - Hedonic and utilitarian motivations are the salient factors affecting online information search and purchase intentions. Marketers are required to design websites that foster an enjoyable online experience. This will attract customers who will browse the website for a longer duration. More time devoted to information search will ensure brand building and loyalty.

• 전기의세계
• /
• v.30 no.2
• /
• pp.112-118
• /
• 1981

This paper derives two new algorithms to calculate the expected energy generated and the reliability indices of a generating system when the loading order of the generating units and the load data of the system are given. These algorithms use the probabilistic simulation model considering the two-block system, and can be easily extended to the three or more block system if necesssary. Suggested model I is a more improved algorithm from the conventional ones, in which the load duration curve is used as is in any other conventional algorithms. And model II, by using the newly developed " ENERGY CURVE", remarkably saves the computing time with reducing the computational errors. Case studies were carried out for the actual load data of Korea Electric Company.c Company.