• 제목/요약/키워드: load transfer curves

검색결과 60건 처리시간 0.026초

Single piles under cyclic lateral loads - Full scale tests and numerical modelling

  • Hocine Haouari;Ali Bouafia
    • Geomechanics and Engineering
    • /
    • 제32권1호
    • /
    • pp.21-34
    • /
    • 2023
  • In order to analyze the effect of the cyclic lateral loading on the response of a pile-soil system, a full-scale single steel pile was subjected to one-way cyclic loading. The test pile was driven into a bi-layered soil consisting of a normally consolidated saturated clay overlying a silty sandy layer, the site being submerged by water up to one meter above the mudline in order to reproduce the conditions of an offshore pile foundation. The aim of this paper is to present the main results of interpretation of the cyclic lateral tests in terms of pile deflections, bending moment, and cyclic P-Y curves. From these latter an absolute secant reaction modulus EAS,N was derived and a simple calculation model of the test single pile is proposed based on this modulus. Two applications of the proposed model are carried out, one with a 2D finite element modelling, and the second with a load transfer curves-based method.

수치해석을 이용한 연약지반에 시공된 스마트 앵커의 거동 분석 (Numerical Analysis of Smart Anchors in Soft Clay by)

  • 김낙경;김성규;강병철;김정열
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.964-968
    • /
    • 2010
  • Ground anchor, commonly referred to as tiebacks or tie-down, is essentially steel elements secured in the ground by cement grout. They are used to provide either lateral or vertical support for various engineered structures, and are effective in all types of soil and rock. However, ground anchor can not be used in soft clay because anchor resistance would not be guaranteed. In this paper, conceptual introduction of the Smart Anchor is presented. The Smart Anchor is a kind of friction type anchor, the load is diffused and applied to the various parts of the distributed bond length, having less impact on the grout strength, and being able to secure necessary anchoring force in relatively soft grounds. This study shows a numerical study of predicting the load transfer of The Smart Anchor in soft clay. A beam-column analysis was performed by a elastic-plastic P-y curves in soft clay.

  • PDF

After-fracture behaviour of steel-concrete composite twin I-girder bridges: An experimental study

  • Lin, Weiwei
    • Steel and Composite Structures
    • /
    • 제42권1호
    • /
    • pp.139-149
    • /
    • 2022
  • To simplify the design and reduce the construction cost of traditional multi-girder structural systems, twin I-girder structures are widely used in many countries in recent years. Due to the concern on post-fracture redundancy, however, twin girder bridges are currently classified as fracture critical structures in AASHTO specifications for highway bridges. To investigate the after-fracture behavior of such structures, a composite steel and concrete twin girder specimen was built and an artificial fracture through the web and the bottom flange was created on one main girder. The static loading test was performed to investigate its mechanical performance after a severe fracture occurred on the main girder. Applied load and vertical displacement curves, and the applied load versus strain relationships at key sections were measured. To investigate the load distribution and transfer capacities between two steel girders, the normal strain development on crossbeams was also measured during the loading test. In addition, both shear and normal strains of studs were also measured in the loading test to explore the behavior of shear connectors in such bridges. The functions and structural performance of structural members and possible load transfer paths after main girder fractures in such bridges were also discussed. The test results indicate in this study that a typical twin I-girder can resist a general fracture on one of its two main girders. The presented results can provide references for post-fracture performance and optimization for the design of twin I-girder bridges and similar structures.

풍화된 암반에 근입된 현장타설말뚝의 하중전이기구 (Load Transfer Mechanism of Drilled Shafts in Weathered Rock)

  • 권오성;조성민;정성준;김명모
    • 한국지반공학회논문집
    • /
    • 제21권5호
    • /
    • pp.187-196
    • /
    • 2005
  • 풍화 및 절리가 발달한 암반에 근입된 말뚝의 허용지지력 결정에는 침하량이 매우 중요한 인자가 되며, 설계단계에서 말뚝두부의 침하량을 예측하기 위해서는 말뚝의 하중전이기구에 대한 이해가 필수적이다. 따라서 본 연구에서는 풍화된 암반에 근입된 현장타설말뚝의 하중전이기구에 대한 연구를 수행하였다. 이를 위해 직경 1m의 총 5본의 현장 타설말뚝을 풍화된 편마암 부지에 시공하구 재하시험 및 하중전이 계측을 수행하여 말뚝의 축방향 지지거동을 분석하였다. 암반상태를 정량적으로 파악하기 위하여 재하시험 부지의 암반에 대한 엄밀한 현장/실내시험을 수행하고, 이를 토대로 암반상태가 말뚝의 하중전이기구에 미치는 영향을 분석하였다. 하중전이 계측을 통해 얻은 주면하중전이 (f-w) 곡선은 풍화상태가 상대적으로 양호한(MW) 연암의 경우, 수 mm의 변위에서 항복에 도달하며, 이후 변위에 따른 지지하중의 증가율이 급격히 둔화되는 경향을 보였다. 반면 풍화암/풍화토에 근입된 말뚝의 f-w 곡선은 뚜렷한 항복점을 보이지 않으며, 상대적으로 큰(>15m) 변위까지 주면하중이 쌍곡선 형태로 증가하였다. 선단하중전이(q-w) 곡선은 암반상태에 관계없이 선단변위 (q-w)까지는 선형적인 거동을 보였다.

항타말뚝과 비교한 현장타설말뚝의 지지력분석 (Analysis of the Bearing Capacity of Drilled Shafts Compared with Driven Piles)

  • 이성준;정상섬;김수일
    • 한국지반공학회지:지반
    • /
    • 제13권5호
    • /
    • pp.75-88
    • /
    • 1997
  • 본 연구에서는 항타말뚝과 비교한 현장타설말뚝의 극한지지력을 하중전이함수를 적용하여 예측하였으며 이를 토대로 항타말뚝과 비교한 현장타설말뚝의 지지력을 현장재하시험 결과와 비교, 분석하였다. 비교, 분석은 하중전이함수들 중 응력 연화를 고려한 방법, 쌍곡선 함수법 및 탄소성 방법을 대표하는 Vijayvergiya의 방법, Castelli의 방법 및 2중 직선법을 적용하여 지반 종류에 따라 현장타설말뚝의 하중-변위관계를 산정하였다. 본 연구 결과 동일한 지반에 설치된 항타말뚝과 현장타설말뚝의 극한지지력은 총 주면마찰력의 차이로 인하여 항타말뚝이 더 큰 것으로 나타났으며 이러한 차이는 점토질 지반에서 보다는 모래질 지반에서 더 크게 나타났다. 같은 지지력을 발현하기 위해 필요한 말뚝 두부에서의 변위량은 항타말뚝보다는 현장타설말뚝에서 더 크게 나타났으며 현장타설말뚝이 극한지지력을 발현하기 위해 필요한 변위량과 이와 같은 크기의 지지력을 발현하는데 필요한 항타말뚝의 변위량과의 차이는 모래질 지반에서 가장 크게 나타났다. 현장타설말뚝과 항타말뚝의 말뚝직경과 길이의 비(LID)의 변화에 따른 극한지지력의 차이는 점토질 지반의 경우 일정한 것으로 나타났으나 모래질 지반에서는 LID의 비가 증가할수록 극한지지력의 차이가 증가하는 것으로 나타났다.

  • PDF

Design of the secondary tunnel lining using a ground-primary support-secondary lining interaction model

  • Chang, Seok-Bue;Seo, Seong-Ho;Lee, Sang-Duk
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.109-114
    • /
    • 2003
  • It is the common practice to reinforce excessively the secondary tunnel lining due to the lack of rational insights into the ground loosening loads. The main load of the secondary lining for drained-type tunnels is the ground loosening. The main cause of the load for secondary tunnel lining is the deterioration of the primary support members such as shotcrete, steel ribs, and rockbolts. Accordingly, the development of the analysis model to consider the ground-primary supports-secondary lining interaction is very important for the rational design of the secondary tunnel lining. In this paper, the interaction is conceptually described by the simple mass-spring model and the load transfer from the primary supports to the ground and the secondary lining is showed by the characteristic curves including the secondary lining reaction curve for the theoretical solution of a circular tunnel. And also, the application of this model to numerical analysis is verified in order to review the potential tool for practical tunnel problems with the complex conditions like non-circular shaped tunnels, multi-layered ground, sequential excavation and so on.

  • PDF

Experimental and theoretical studies on SHS column connection with external stiffening ring under static tension load

  • Rong, Bin;You, Guangchao;Zhang, Ruoyu;Ma, Xu;Quan, Xinxin
    • Steel and Composite Structures
    • /
    • 제28권2호
    • /
    • pp.167-177
    • /
    • 2018
  • In order to investigate mechanical properties in the core area of Square Hollow Section(SHS) column connection with external stiffening ring, four specimens were tested under the static tension load. The failure modes, load-displacement curves and strain distribution were analyzed to study the mechanical properties and the load transfer mechanism of the core area of connections. The connections behave good ductility and load-bearing capacity under the static tension load. Parametric analysis was also conducted, in which the thickness of steel tube, extended width and thickness of the stiffening ring were considered as the parameters to investigate the effects on mechanical properties of the connections. Based on the experimental results, an analytical method for the bearing capacity of connection with external stiffening ring under the static tension load was proposed. The theoretical results and the experimental results are in good agreement, which indicates that the theoretical calculation method of the bearing capacity is advisable.

대심도 연약지반상 마찰말뚝의 주면하중전이 거동 분석 (Shear Load Transfer Characteristics of Friction Piles in Deep Soft Clay)

  • 문준식;백진열;정상섬;고준영
    • 한국지반공학회논문집
    • /
    • 제27권10호
    • /
    • pp.55-67
    • /
    • 2011
  • 일반적으로 연직하중을 받는 말뚝의 주면하중전이 거동 및 변형해석을 위해 f-w 하중전이 해석법이 널리 사용되고 있다. 본 연구에서는 국내 지반조건에 적합한 대심도 마찰말뚝의 주면하중전이 해석을 고찰하였으며, 여러 현장재하시험 자료와 3차원 유한요소해석 및 이론적인 방법 통해 말뚝의 실제 거동에 보다 부합되도록 대심도 마찰말뚝의 f-w곡선을 제안하였다. 제안된 하중전이함수법의 타당성을 검증하기 위하여 현장재하시험 사례와의 비교분석을 수행하였고, 그 결과, 제안된 해석방법은 기존 f-w곡선에 비해 대심도 마찰말뚝의 거동 및 변형 특성을 적절히 예측함을 알 수 있었다. 또한 대심도 마찰 말뚝지반의 상호작용을 정량적으로 평가하기 위하여 주면하중전이거동에 영향을 주는 인자들을 통한 매개변수 연구를 추가로 수행하였다.

양방향 재하시험 결과를 이용한 암반소켓 현장타설말뚝의 주면 마찰력과 선단 지지력 (Skin Friction and End Bearing Resistances of Rock-socketed Piles Observed in Bi-directional Pile Load Tests)

  • 송명준;박영호;김명모
    • 한국지반공학회논문집
    • /
    • 제29권7호
    • /
    • pp.17-36
    • /
    • 2013
  • 본 연구에서는 해상 교량 현장과 초고층빌딩 현장에서 실시한 암반에 근입된 대구경 현장타설말뚝의 양방향 재하시험(총 4개 현장, 13개 말뚝) 결과를 분석하여 연암에서의 주면마찰력과 선단지지력 산정을 위한 경험식을 제안하였다. 양방향 재하시험을 위하여 각 시험 말뚝의 정 중앙 위치에서 시추 및 지반조사가 이루어졌으며, 각 말뚝에 부착한 계측장치로부터 얻은 데이터를 이용하여 주면의 f-w 곡선과 선단의 q-w 곡선을 작성하였다. 이 곡선들로부터 - 지반조사결과들과 주면마찰력 및 선단지지력에 대한 다중회귀분석을 실시하여 - 변위에 따른 극한 주면마찰력과 선단지지력 산정식을 제안하였으며, 이 결과를 기존의 경험식들과 비교 분석하였다. 변위가 증가할수록 지지력이 증가하는 국내 암반의 f-w 곡선과 q-w 곡선의 특성상, 다양한 말뚝 변위기준에 따라 제안한 경험식들이 변위와 무관하게 일정한 극한값으로 제안된 기존의 경험식들보다 더 합리적인 것으로 판단된다. 본 연구의 제안식들 중에서 일축압축강도의 함수로 나타낸 주면마찰력 및 선단지지력에 대한 제안식이 다른 지반정수들에 의한 경험식보다 좋은 상관관계를 보여주는 것으로 나타났다.

지반-1차지보재-2차라이닝의 상호작용을 고려한 터널 2차라이닝 해석모델 (An Analysis Model of the Secondary Tunnel Lining Considering Ground-Primary Support-Secondary Lining Interaction)

  • 서성호;장석부;이상덕
    • 터널과지하공간
    • /
    • 제12권2호
    • /
    • pp.107-114
    • /
    • 2002
  • 터널 2차라이닝은 지반하중의 합리적인 산정기준의 부재와 보수적 경향의 지반이완하중법이 적용되고 있기 때문에 과다한 경향으로 보강되고 있는 실정이다. 2차라이닝에 고려되는 주요하중으로는 지반이완하중과 수압을 들 수 있으며, 배수터널의 경우에는 지반하중이 가장 큰 하중이 된다. 터널 주변 지반에 별도의 외력이 작용하지 않는다면, 2차라이닝에 작용하는 하중의 직접적인 원인은 1차지보재의 지지력 저하이다. 따라서, 2차라이닝의 설계시에는 지반과 1차지보재와의 상호작용을 고려한 합리적인 해석방법이 요구된다. 본 논문에서는 단순한 질량-스프링 모델을 통하여 지반-1차지보재-2차라이닝의 상호작용을 개념적 모델로 설명하였으며, 이를 원형터널에 대한 이론해석을 통하여 지반-1차지보재-2차라이닝 의 상호작용에 대한 하중전이 특성을 입증하였다. 그리고, 복잡한 터널해석조건에 대한 본 모델의 적용성을 검토하기 위하여 수치해석법의 적용성을 검증하였다.