Browse > Article
http://dx.doi.org/10.7843/kgs.2013.29.7.17

Skin Friction and End Bearing Resistances of Rock-socketed Piles Observed in Bi-directional Pile Load Tests  

Song, Myung-Jun (R&D Division, Hyundai Engrg. and Construction Co. Ltd.)
Park, Yung-Ho (R&D Division, Hyundai Engrg. and Construction Co. Ltd.)
Kim, Myoung-Mo (Dept. of Civil and Environmental Engrg., Seoul National Univ.)
Publication Information
Journal of the Korean Geotechnical Society / v.29, no.7, 2013 , pp. 17-36 More about this Journal
Abstract
In this paper, the empirical relations of skin friction and end bearing resistance with the results of site investigation in soft rock are proposed through the analysis of bi-directional pile load tests of rock socketed drilled shafts performed at large offshore bridge foundations and high-rise building projects (13 test piles in 4 projects). The site investigation and drilling for bi-directional pile load tests were performed at the centers of test piles, and f-w curves for skin friction and q-w curves for end bearing were plotted based on load-transfer measurements. From the above curves, the empirical relations of skin friction and end bearing resistance with the results of site investigation depending on the mobilized displacement are determined by multiple regression analysis and compared with previous studies. Since the f-w and q-w curves of rock-socketed piles in Korea show hardening behavior according to mobilized displacement, the developed empirical relations by the mobilized displacement are more reasonable than those of previous studies which could not consider the mobilized displacement and suggested the ultimate capacity with unconfined compressive strength only. Particularly, the developed equations correlated with unconfined compressive strength show the best correlations among the equations correlated with other parameters.
Keywords
Rock socketed pile; Drilled shaft; Skin friction; End bearing; f-w; q-w; Empirical relation; Bi-directional pile load test;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Vipulanandan, C., Hussain, A., and Usluogulari, O. (2007), "Parametric study of open core-hole on the behavior of drilled shafts socketed in soft rock", In Contemporary Issues in Deep Foundations: Proceedings of Geo-Denver 2007, Geotechnical Special Publication No.158, pp.18-21.
2 Zhang, L. and Einstein, H. H. (1998), "End Bearing Capacity of Drilled Shafts in Rock", Journal of the Geotechnical and Geoenvironmental Engineering, ASCE, Vol.124, No.7, pp.574-584.   DOI   ScienceOn
3 Abdelrazaq, A., Poulos, H. G., Badelow, F., and Kim, S. H. (2011), Foundation Design and Pile Testing Program for the 151 Story Incheon Tower in Reclamation Area, Proceedings of the 7th International Conference on Tall Buildings, Incheon, Korea, pp.815-823.
4 AASHTO (1996), Standard Specifications for Highway Bridges. (16th Ed.), American Association of State Highway and Transportation Officials, Washington, D.C.
5 CGS (1992), Canadian Foundation Engineering Manual. (3nd Ed.), Canadian Geotechnical Society, Ottawa, Canada.
6 GEO (2006), Foundation Design and Construction, Geotechnical Engineering Office, Hong Kong.
7 Horvath, R. G. and Kenney, T. C. (1979), "Shaft Resistance of Rock-Socketed Drilled Piers", Proceedings, Symposium on Deep Foundations, ASCE, Atlanta, Georgia, pp.182-214.
8 Kim, M. M. (2007), "The Bi-directional Pile Load Test", Workshop in commemoration of the establishment of the ATC-18 Mega foundation, KGS pile foundation committee, Seoul, Korea, pp.89-98.
9 Korean Geotechnical Society (2003), Korea structure and foundation design specification (KSFDS), pp.348-350.
10 Kwon, O. S. (2004), Effect of rock mass weathering on resistant behavior of drilled shaft socketed into weathered rock, Ph.D. Dissertation, Seoul University, Seoul.
11 Ng, C.W.W., Yau, T.L.Y., Li, J.H.M., and Tang, W. H. (2001), "Side resistance of large diameter bored piles socketed into decomposed rocks", Journal of Geotechnical and Geoenvironmental Engineering, American Society of Civil Engineers, 127(8), pp.642-657.   DOI   ScienceOn
12 Rosenberg, P. and Journeaux, N. L. (1976), "Friction and End Bearing Tests on Bedrock for High Capacity Socket Design", Canadian Geotechnical Journal, Vol.13, pp.324-333.   DOI
13 Osterberg, J.O. (1998), "The Osterberg load test method for bored and driven piles the first ten years", Proceedings of the 7th International Conference on Piling and Deep Foundations, Vienna, pp.1-11.
14 Osterberg, J.O. (2001), "Load testing high capacity piles what have we learned?", Proceedings of the 5th international conference on deep foundation practice, Singapore.
15 Peck, R. B., Hanson, W. E., and Thornburn, T. H. (1974), Foundation Engineering (2nd ed.), John Wiley and Sons, New York, pp.361-374.
16 Rowe, R. K. and Armitage, H. H. (1987), "A Design Method for Drilled Piers in Soft Rock", Canadian Geotechnical Journal, Vol.24, pp.126-142.   DOI   ScienceOn
17 Seol, H.I. (2007), Load Transfer Analysis of Rock-Socketed Drilled Shafts by considering Coupled Soil Resistance, Ph.D. Dissertation, The Graduate School Yonsei University Department of Civil Engineering, Seoul, Korea, pp.93-95.
18 Serrano, A. and Olalla, C. (2002), "Ultimate bearing capacity at the tip of a pile in rock - part 1: theory", International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 39(7), pp.883-846.
19 Song, M. J., Park, Y. H., and Kim, D. J. (2005), "Preliminary Load Tests for the Design of Large Diameter Drilled Shaft by Bi-directional Loading Method at Toe", KGS Spring Conference, Jeju, Korea, pp.89-98.   과학기술학회마을
20 Song, M. J., Kim, D. J., Park, Y. H., and Cho, S. (2006), "Joint Pile Load Tests by Multi Level Bi-directional Test Method for Incheon Bridge", KGS Fall Conference, Daegu, Korea, pp.689-697.
21 Williams, A. F. and Pells, P. J. N. (1981), "Side Resistance of Rock Sockets in Sandstone, Mudstone, and Shale", Canadian Geotechnical Journal, Vol.18, pp.502-513.   DOI   ScienceOn