• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.633-644
• /
• 2008

The structural framework design uses high-strength bolts and welding in column splices. However, for the column under high compression, the number of the required high-strength bolts can be excessive and the increase of welding results in difficulty of quality inspection, the transformation of the structural steels, and the increase of erection time. According to the AISC criteria, when columns have bearing plates, or they are finished to bear at splices, there shall be sufficient connections to hold all parts securely in place. The Korean standard sets the maximum 25% of the load as criteria. Using direct contact makes it possible to transfer all compressive force through it. The objective of this study is to examine the generally applied stress path mechanism of welded or bolted columns and to verify the bending moment and compression transfer mechanism of the column splice according to metal touch precision. For this study,22 specimens of various geometric shapes were constructed according to the change in the variables for each column splice type, which includes the splice method, gap width, gap axis, presence or absence of splice material, and connector type. The results show that the application of each splice can be improved through the examination of the stress path mechanism upon metal contact. Moreover, the revision of the relative local code on direct contact needs to be reviewed properly for the economics and efficiency of the splices.

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.71-83
• /
• 2005

In this paper, we developed the Distributed Programming Developing Tool(DPDT) which can make distributed application program efficiency based on the distributed object group framework supporting group management and dynamic binding for object resources requested from clients on distributed systems. The distributed object group framework we constructed provides not only the group register/withdraw, the access right and the name/property services for server objects from a point of view of group management services, but also dynamic binding, replicated object supporting, load balance, and federation among the object groups from a point of view of the supporting services of distributed application, When developing distributed application, by using our tool, server programming developer implements objects in each server system, next registers the properties to need for service provision to the object group. Client programming developer can also develop client program easily by obtaining the access right for the object or the object group and using the properties of objects with the access right permitted to the client. For providing above application developing environment in this paper. we described the definition of object group, the architecture of the distributed object group framework which our tool supports, and its functionalities, then specified the 3 GUI environments of DPDT implemented for providing efficient interfaces between the distributed object group and distributed applications. Finally, by using the DPDT, we showed the group register/withdraw and the access right grant procedure of objects which are server programs, the developing process of client program, and the executing results of the distributed application developed.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.773-782
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method to overcome disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do a fast data search and maintain search efficiency independent of the number of peer. The peers in the DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in the DHT method should send messages more frequently to keep the routing table updated and reduce the failure of a request. Therefore, this results in increase of network traffic. In our previous research, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but the reactive method had a disadvantage to generate more traffic than the existing Chord if the number of requests per second becomes large. In this paper, we propose an adaptive method of routing table update to reduce the network traffic. In the proposed method, we apply different routing table update method according to the number of request message per second. If the number of request message per second is smaller than some threshold, we apply the reactive method. Otherwsie, we apply the existing Chord method. We perform experiments using Chord simulator (I3) made by UC Berkeley. The experimental results show the performance improvement of the proposed method compared to the existing methods.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.761-772
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method to overcome disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do a fast data search and maintain search efficiency independent of the number of peer. The peers in the DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in the DHT method should send messages more frequently to keep the routing table updated and reduce the failure of a request. Therefore, this results in increase of network traffic. In our previous research, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but the reactive method had a disadvantage to generate more traffic than the existing Chord if the number of requests per second becomes large. In this paper, we propose an adaptive method of routing table update to reduce the network traffic. In the proposed method, we apply different routing table update method according to the number of request message per second. If the number of request message per second is smaller than some threshold, we apply the reactive method. Otherwsie, we apply the existing Chord method. We perform experiments using Chord simulator (I3) made by UC Berkeley. The experimental results show the performance improvement of the proposed method compared to the existing methods.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.21-28
• /
• 2006

In this paper, the proposed full-bridge high frequency isolated zoo voltage and zero current switching phase shifted pulse width modulation(ZVZCS PS-PWM)DC-DC converter among fuel cell generation system consist of 1.2[kW] fuel cell of Nexa Power Module, full-bridge DC-DC converter to boost the fuel cell low voltage($28{\sim}43[%]$) to 380[VDC] and a single phase full-bridge inverter is implemented to produce AC output(220[VAC], 60[Hz]). A tapped inductor filter with freewheeling diode is newly implemented in the output filter of the proposed full-bridge high frequency isolated ZVZCS PS-PWM DC-DC converter to suppress circulating current under the wide output voltage regulation range, thus to eliminate the switching and transformer turn-on/off over-short voltage or transient phenomena. Besides the efficiency of $93{\sim}97[%]$ is obtained over the wide output voltage regulation ranges and load variations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2B
• /
• pp.130-137
• /
• 2012

In this paper, we propose core and edge router architectures with LPI(Low Power Idle) for reducing energy consumption in OBS networks. The proposed core router architecture is comprised of a BCP switch, a burst switch, line cards and sleep/wake controller for LPI. When the offered load of network is low, sleep/wake controller can change the state of the core router line card from active to sleep state for saving the energy after receiving network control packet. The edge router consists of a switch for access line card, a SCU and OBS edge router line cards. The LPI function in edge router line card is performed through network level control by network control packet, individually. Additionally, PHY/transceiver modules can transition active state to sleep state when burst assemble engine generates new bursts. To evaluate the energy saving performance of proposed architecture with LPI, the power consumption of each router is analyzed by using data sheet of commercial router and optical device. And, simulation is also performed in terms of sleep time of PHY/Transceiver through OPNET.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.618-624
• /
• 2020

A portable power supply system for soldiers must be able to supply electric energy corresponding to the power consumption of combat support troops, and have a carrying load in a range that does not impair the combatant's ability to execute operations. In particular, as the total required power of combat equipment increases with the advances in the future soldier system, a portable, lightweight power supply system with high efficiency is essential. A fuel cell has a high energy-to-weight density compared to lithium batteries, which are used mainly as a military power source system. Therefore, it is capable of miniaturization and lightweight, making active R&D to a portable power supply system. In this paper, the characteristics of the fuel cell applied as a portable power supply system, and the R&D trends of domestic and foreign military portable fuel cell systems were investigated. The current status of domestic technology compared to the level of foreign development was analyzed. In addition, future technology development plans are presented based on the consideration factors when developing a portable fuel cell (power supply stability, portability, and cost reduction) so that it can be used when establishing a plan on the development of a portable fuel cell system for the future soldier system.

• Journal of The Korean Association of Information Education
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2007

Along with the development of telecommunication technology, educational role has been considerably changed and NEIS is introduced and operated for the digital educational administration. However, the function of NEIS is so limited when operated in each school. As a result, Korean government prepares the plan to install and operate a new School Affairs System by separating 3 areas from 27 areas of NEIS. School Affairs System has been used in schools since March, 2006. In this regard, this study attempts to analyze the current status and tasks of using the system in elementary schools. The result of the study shows that about 67% teachers use the system once or twice a day. Most of teachers answer that they get help from other teachers if they have any problem in operating the system. Many teachers affirmatively answer to the design and function of the system, and they are satisfied with the convenience and efficiency of the system. However, they feel difficulty to be familiar with the system sue to the frequent change. The importance of electronic certificate and personal information is well recognized and managed in terms of the security of the system. Facilities need to be well equipped, and information exchange system need to be developed to accept each school's request to improve the function of the system. In addition, applicable laws need to be arranged, clear guideline of educational administration agency and principal's strong intention are required to relieve teachers' work load.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.