• 전기학회논문지P
• /
• 제56권4호
• /
• pp.173-178
• /
• 2007

As development of industry is accelerated, most electricity load system requires power supply that could be high precision and effective control. Among supply and control unit of suitable power supply in these load characteristic, inverter systems of constant current regulate is used widely control of lighting & beaconing of aerodromes and electric heating system. Therefore, in this paper proposed a inverter systems of constant current regulate that using improved measurement and switching techniques. Proposed measure techniques that used moving average method of instantaneous r.m.s. for measuring current sensing improved response and precision. Also, in this paper proposed improved high effectiveness switching techniques that get high efficiency of inverter by the double-carrier modulation. Results of an experiment proved effect of proposed system.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1597-1606
• /
• 2003

Static analysis using hybrid finite element(FE) method has been applied to characterize the influence of position, runout and thickness errors of the sun, ring and planet on the bearing forces and critical tooth stress. Some guidelines for tolerance control to manage critical stress and bearing forces are deduced from the results. Carrier indexing error planet assembly and planet tooth thickness error are most critical to reduce planet bearing force and maximize load sharing as well as to reduce critical stresses. Sun and carrier bearing forces due to errors increase several times more than those of normal condition.

• Journal of Ship and Ocean Technology
• /
• 제11권3호
• /
• pp.24-38
• /
• 2007

It is a very challenging work to design large Arctic LNG carrier, since LNG carrier requires high reliability for the structural safety and the environment of Arctic region is known to be very severe. Therefore, special attention should be paid for the verifying the structural safety of LNG career particularly with regard to LNG leakage. In this paper, the safety of the hull structure and cargo containment system of 208K MK $III^{TM}$ type LNG carriers with Arc4 is investigated based on the direct calculation of ice loads as well as wave loads. From the whole investigation, it is clear that the developed vessel - 208K MK $III^{TM}$ type LNG carrier with RMRS Ice class Arc4 - has enough strength and is safe to be operated in Arctic region.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.92-97
• /
• 2015

The design of the glass-carrier was studied using simulations of the temperature distribution of an ITO deposition inline-sputter process. The temperature distribution was simulated in Heating Chamber 7, and in the ITO Deposition Chambers 8 and 9. The temperature distribution of the glass sheets was low in both the lower and upper lines. Moreover, it was observed that the temperature in Chamber 8 significantly affected the temperature in Chamber 9, and that the latter was hotter. The rear of the chambers were subjected to more heating than the fronts, so the temperature range at the back was wider. Redesigning the shape of the carrier made it possible to load more glass sheets on the glass carrier, and to make deposits on the ITO glass at higher temperature, over a wider area.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.667-679
• /
• 2020

As the LNG carrier operates in ice covered waters, it is key to ensure the overall safety, which is related to the coupling effect of ice-breaking process and internal liquid sloshing. This paper focuses on the sloshing simulation of the ice-breaking LNG carrier, and the numerical method is proposed using Circumferential Crack Method (CCM) and Volume of Vluid (VOF) with two main key factors (velocity νx and force Fx). The ship motion analysis is carried out by CCM when the ship navigates in the ice-covered waters with a constant propulsion power. The velocity νx is gained, which is the initial excitation condition for the calculation of internal sloshing force Fx. Then, the ship motion is modified based on iterative computations under the union action of ice-breaking force and liquid sloshing load. The sloshing simulation under the LNG tank is studied with the modified ship motion. Moreover, an ice-breaking LNG ship with three-leaf type tank is used for case study. The internal LNG sloshing is simulated with three different liquid heights, including free surface shape and sloshing pressure distribution at a given moment, pressure curves at monitoring points on the bulkhead. This present method is effective to solve the sloshing simulation during ice-breaking process, which could be a good reference for the design of the polar ice-breaking LNG carrier.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.537-553
• /
• 2016

This paper addresses the safety of two-row tank design by performing the extensive sloshing model tests. Owing to the uncertainties entangled with the scale law transforming the measured impact pressure up to the full scale one, so called comparative approach was taken to derive the design sloshing load. The target design vessel was chosen as 230 K LNG-FPSO with tow-row tank arrangement and the reference vessel as 138 K conventional LNG carrier, which has past track record without any significant failure due to sloshing loads. Starting with the site-specific metocean data, ship motion analysis was carried out with 3D diffraction-radiation program, then the obtained ship motion data was used as 6DOF tank excitation for subsequent sloshing model test and analysis. The statistical analysis was carried out with obtained peak data and the long-term sloshing load was determined out of it. It was concluded that the normalized sloshing impact pressure on 230 K LNG-FPSO with two-row tank arrangement is higher than that of convectional LNG carrier, hence requires the use of reinforced cargo containment system for the sake of failure-free operation without filling limitation.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.101-106
• /
• 2006

Formwork is a temporary structure that supports its weight and that of freshly placed concrete as well as construction live loads. In constructions site, pipe supports are usually used as shores which are consisted of the slab formwork. The strength of a pipe support is decreasing as it is frequently being used at the construction site. Among the accidents and failures that occur during concrete construction, there are many formwork failures which usually happen at the time concrete is being placed. The objective of this study is to find out the strength change of used pipe support and unused pipe supports according to aging. In this study, 2857 pipe supports were prepared. Among these pipe supports, 2337 pipe supports were lent to the construction companies free of charge. 520 pipe supports were kept on the outside. Compressive strength was measured by knife edge test and plate test at each 3 month. Test results show that the strength of unused pipe supports as well as used pipe supports was decreasing according to age, use frequency and load carrier, and the strength of used pipe supports was lower than the strength of unused pipe supports at the same age. So, the strength of used pipe supports from 191 days to present day was not satisfied the specification of KS F 8001. In this study, the strength of pipe support according to age, use frequency and load carrier was predicted using SPSS 12.0. It was known that the strength of pipe support using for 5 years was reduced to 42.8%. According to these results, it shows that attention has to be paid to formwork design using used pipe supports. Therefore, the present study results will be able to provide a finn base to prevent formwork collapses.

• 건설안전기술
• /
• 통권38호
• /
• pp.79-87
• /
• 2006

Formwork is a temporary structure that supports its weight and that of freshly placed concrete as well as construction live loads. In constructions site, pipe supports are usually used as shores which are consisted of the stab formwork. The strength of a pipe support is decreasing as it is frequently being used at the construction site. Among the accidents and failures that occur during concrete construction, there are many formwork failures which usually happen at the time concrete is being placed. The objective of this study is to find out the strength change of used pipe support and unused pipe supports according to aging. In this study, 2857 pipe supports were prepared. Among these pipe supports, 2337 pipe supports were lent to the construction companies free of charge. 520 pipe supports were kept on the outside. Compressive strength was measured by knife edge test and plate test at each 3 month. Test results show that the strength of unused pipe supports as well as used pipe supports was decreasing according to age, use frequency and load carrier, and the strength of used pipe supports was lower than the strength of unused pipe supports at the same age. So, the strength of used pipe supports from 191 days to present day was not satisfied the specification of KSF 8001. In this study, the strength of pipe support according to age, use frequency and load carrier was predicted using SPSS 12.0. It was known that the strength of pipe support using for 5 years was reduced to 42.8%. According to these results, it shows that attention has to be paid to formwork design using used pipe supports. Therefore, the present study results will be able to provide a firm base to prevent formwork collapses.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.953-960
• /
• 2012

풍력발전기용 증속기의 유성기어열에서 한단 지지 캐리어에 유연 핀을 적용하여 유성 축과 유연 핀의 변형에 의한 자기 정렬 효과가 증속기 유성기어열의 수명에 미치는 영향에 대한 연구를 수행하였다. 유성기어열의 하중 분배 효과를 분석하기 위하여 오일러 이론과 상용 프로그램을 이용하였다. 풍력발전기용 증속기에 한단 지지 캐리어와 유연 핀이 사용됨에 따라 유성기어의 미스얼라인먼트, 치면 하중분포 계수 및 요구수명이 만족할 만한 성능 향상을 가져왔으며, 특히 요구수명에 있어서 증속기가 요구하는 20년 보증 수명을 만족하는 것으로 확인되었다.

• 무역상무연구
• /
• 제69권
• /
• pp.221-237
• /
• 2016

This study aims to review the article 26 of UCP 600. The article 26 of UCP 600 deals with 'on deck cargo' and 'unknown wording' in L/C transaction. The article 26 of UCP 600 says that a transport document stating that the goods may be carried on deck is accept able. UCP 600 requires to reject transport documents which evidence that the goods are or will be loaded on deck. So the bank will not accept the B/L containing a clause stating the goods are or will be loaded on deck. But in practice a container cargo is carried on deck actually but we do not describe this fact on the Bill of Lading. The deck stowage is not allowed under the clean B/L. But in case of container cargo, the carrier has the right to carry the container on deck in practice. In spite of this practice the carrier can not describe this fact correctly like this : "The container cargo loaded on deck". If carrier describes on B/L like this, the bank rejects the B/L in L/C transaction. So the carrier describes as "the goods may be carried on deck" on the back of the B/L. But they loaded the container on deck actually. This article suggests some ideas on this matter. In addition, the article 26 of UCP 600 says that a transport document bearing a clause such as "shipper's load count" or "said by shipper to contain" is acceptable. This means that a carrier has no responsibility on the contents of containers. In case of FCL Cargo, it is impossible for a carrier to check the details of container cargo. Therefore it is inevitable to insert the expressions such as "SLC(shipper's load and count)" or "STC(said to contain)". The wording described on the face of B/L should be interpreted as intended and consistently. The intention of the carrier is not the actual quantity or weight. So unknown wording does not represent the actual quantity or weight. But some cases show that the carriers are indemnified by such insertion but others reject the effectiveness of such insertion. So this study emphasizes that unknown wording can not fully indemnify the carriers and that the insertion of such expressions shall be minimized.