• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.191-194
• /
• 2003

In IEEE 802.11b, Medium Access Control Sublayer consists of DCF (Distributed Coordination Function) and PCF (Point Coordination Function). DCF provides contention based services and PCF provides contention free services for QoS satisfaction. DCF uses CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) as an access protocol. And PCF uses Polling Scheme. In this paper, a modified New-PCF, which gives weights to channels with heavier traffic load, was suggested. NS-2 simulations were conducted to compare the service performances with original DCF, PCF and the modified New-PCF respectively. Simulation results has shown the increased overall throughput with the proposed New-PCF compared with other cases.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.2
• /
• pp.312-316
• /
• 2013

Caffeine is a thermogenic agent that can be used in weight loss products. In order to achieve a sustained release of caffeine, silk fibroin (SF) film was uses as carrier. It has been shown that the loading method of caffeine into SF film affected the uniform distribution of caffeine in the SF film. When caffeine was added directly into SF solution, gelation has been occurred immediately and prevented the uniform distribution of caffeine. On the other hand, caffeine was dissolved in methanol in order to load the caffeine in SF film and crystallize the SF film at the same time. However, due to the fast evaporation of methanol, caffeine was recrystallized on the surface of SF film rather than penetrating into the film. Finally, caffeine was loaded into pre-crystallized SF film and uniform distribution of caffeine could be achieved. There was an initial burst of caffeine during the first 15 min, but after that a sustained release was achieved.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2016

Reverse matrix converters, which can step up voltages, are suitable for applications with source voltages that are lower than load voltages, such as generator systems. Reverse matrix converter topologies are advantageous because they do not require additional components to conventional matrix converters. In this paper, a detection method and a post-fault modulation strategy to operate a converter as close as possible to its desired normal operation under the open-switch fault condition in the rectifier stage are proposed. An open-switch fault in the rectifier stage of a reverse matrix converter causes current distortions and voltage ripples in the system. Therefore, fault-tolerant control for open-switch faults is required to improve the reliability of a system. The proposed strategy determines the appropriate switching stages from among the remaining healthy switches of the converter. This is done based on reference currents or voltages. The performance of the proposed strategy is experimentally verified.

• Computers and Concrete
• /
• v.13 no.5
• /
• pp.679-694
• /
• 2014

The selected carrier systems of reinforced concrete frame buildings are quite important on structural damages. In this study are examined comparatively nonlinear behaviours of reinforced concrete frames which having different stiffening members under a horizontal load. In that respect, the study consists of six parametric models. With this purpose, nonlinear structural analyses of reinforced concrete frames which having different stiffening members were carried out with LUSAS which uses the finite element method. Thus, some conclusions and recommendations to mitigate the damage of reinforced concrete buildings in the future designs are aimed to present. The obtained results revealed that in terms of performance, the x-shaped diagonal elements can be used as an option to shear walls. In addition, it was found that frame-2, frame-3 and frame-4 showed a better performance than traditional frame system (frame-1).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1218-1224
• /
• 2017

With the increasing risk in building liquefied natural gas carriers (LNGC), pre-simulation of various scenarios is required for system integration and safe operation. In particular, the power management system (PMS) is an important part of the LNGC; it works in tight integration with the power control systems to achieve the desired performance and safety. To verify and improve unpredicted errors, we implemented a simulation model of power generation and consumption for testing PMS based on software-in-the-loop (SIL) method. To control and verify the PMS, numeric and physical simulation modeling was undertaken utilizing MATLAB/Simulink. In addition, the simulation model was verified with a load sharing test scenario for a sea trial. This simulation allows shipbuilders to participate in new value-added markets such as commissioning, installation, operation, and maintenance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.77-81
• /
• 2008

In the deeply coupled GPS/INS integrated systems, if the integration filter update period is longer than the period of GPS navigation data, the loss of correlation values occurs due to the bit transition. This problem can be resolved when data wipe off(DWO) is used. However, general DWO methods requires heavy computation or cannot be applied continuously. This paper proposes an effective DWO method using carrier phase discriminator In order to show validity of the proposed method, simulations were carried out. The simulation results show that the data bit is accurately estimated and conform that the loss of correlation values and the error of code phase is small.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.2
• /
• pp.126-132
• /
• 2014

In this study, a method for analyzing the collision and interaction between ice bergy bits and a Mark III type liquid natural gas (LNG) carrier was considered, and the structural safety of a ship's hull and cargo containment system (CCS) was evaluated. In the analysis, a constitutive model implementing the strain rate dependant mechanical property was used to consider the typical material characteristics of ice rationally. A relatively simple and easy ice structure interaction analysis procedure, compared with the accurate but complicated FSI analysis scheme, was suggested. When the ice bergy bits collided with ship's side hull under the four assumed scenarios, the structural behaviors of the ship structure and LNG CCS were simulated by applying the suggested ice collision analysis procedure using the commercial hydro-code LS-DYNA. In addition, the effects of the shapes and colliding speed of the ice bergy bits on the ice-structure interaction and safety of the CCS were examined in detail.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6C
• /
• pp.483-491
• /
• 2012

In vehicle-to-vehicle (V2V) communications, each vehicle should periodically disseminate a beacon message including the kinematics information, such as position, speed, steering, etc., so that a neighbor vehicle can better perceive and predict the movement of the vehicle. However, a simple broadcasting of such messages may lead to a low reception probability as well as an excessive delay. In this paper, we attempt to analyze the impact of the following key parameters of the beacon dissemination on the performance of vehicular networks: beacon period, carrier-sensing range, and contention window (CW) size. We first derive a beacon period which is inversely proportional to the vehicle speed. Next, we mathematically formulate the maximum beacon load to demonstrate the necessity of the transmit power control. We finally present an approximate closed-form solution of the optimal CW size that leads to the maximum throughput of beacon messages in vehicular networks.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.71-78
• /
• 2008

The paper proposes a chaotic double tent mapping PWM scheme for mitigation the acoustic noise of a motor chive. The chaos area ${\lambda}=0.99$ in bifurcation tree of the double tent mapping is used for generating the chaotic numbers. A 80C196 micro-controller is employed for generation of chaotic numbers, and the triangular carrier with chaotic frequency is obtained by using a 80C196 micro-controller and a MAX038 frequency modulator. The experiments are executed with a 1.5[kw] induction motor chive under the 2.5[A] load condition. As results, the experimental results show that the carrier, voltage and 3-D switching noise spectra of the proposed scheme is spread over the chaotic frequency range with no specific frequency concentration. Thereby, the shrill acoustic noise radiated from a motor chive is reduced by the proposed scheme.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.499-507
• /
• 2023

The core of the liquefied natural gas (LNG) carrier cargo containment system (CCS) is to store and transport LNG safely under temperatures below -163 degrees Celsius. The secondary barrier of the LNG CCS is adopted to prevent LNG leakage from CCS to the ship's hull structure. Recently, as the size of the LNG CCS increases, various studies have been conducted on the applied temperature and load ranges. The present study investigates the working condition-dependent bonding strength of the PU15 adhesives of the secondary barrier. In addition, the mechanical performance is analyzed at a cryogenic temperature of -170 degrees Celsius, and the failure surface and failure mode are investigated depending on the working condition of the bonded process. Even though the RSB and FSB-based fracture mode was confirmed, the results showed that all the tested scenarios satisfied the minimum requirement of the regulation.