• Steel and Composite Structures
• /
• 제48권5호
• /
• pp.531-545
• /
• 2023

Composite dowels are implemented as a powerful alternative to headed studs for the efficient combination of Ultra High-Performance Concrete (UHPC) with high-strength steel in novel composite structures. They are required to provide sufficient shear resistance and ensure the transmission of tensile forces in the composite connection in order to prevent lifting of the concrete slab. In this paper, the load bearing capacity of puzzle-shaped and clothoidal-shaped dowels encased in UHPC specimen were investigated based on validated experimental test data. Considering the influence of the embedment depth and the spacing width of shear dowels, the characteristics of UHPC square plate on the load bearing capacity of composite structure, 240 numeric models have been constructed and analyzed. Three artificial intelligence approaches have been implemented to learn the discipline from collected experimental data and then make prediction, which includes Artificial Neural Network-Particle Swarm Optimization (ANN-PSO), Adaptive Neuro-Fuzzy Inference System (ANFIS) and an Extreme Learning Machine (ELM). Among the factors, the embedment depth of composite dowel is proved to be the most influential parameter on the load bearing capacity. Furthermore, the results of the prediction models reveal that ELM is capable to achieve more accurate prediction.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.503-512
• /
• 1990

본 연구에서는 하중작용점(혹은 변위제어점)이 일점이고 스탭 백 현상이 없는 문제에 유용한 페널티 방법(penalty method)을 제안하고, 스냅 백 현상이 수반되는 경 우에는 페널티 방법과 Riks 방법을 선택적으로 취할 수 있도록 한다. 그리고 하중 작용점이 일점 혹은 그 이상의 점일 경우에 대해서는 Riks 방법을 기준으로 하되 일정 조건하에서는 새로운 증분하중 파라미터를 선택할 수 있게 하여, 순수한 Riks 방법으 로만 계산할 때에 일어날 수 있는 발산을 없앨 수 있게 한다. 끝으로 변위제어점이 일점 혹은 그 이상의 점인 경우에 대해 'Riks형 방법(Riks' type method)'을 제안하고, 이때에도 Riks형 방법을 기준으로 게산하되 일정한 조건하에서는 새로운 증분변위 파 라미터를 선택적으로 취할 수 있게 한다.

• Safety and Health at Work
• /
• 제4권1호
• /
• pp.46-51
• /
• 2013

Objectives: Load carrying tasks are recognized as one of the primary occupational factors leading to slip and fall injuries. Nevertheless, the mechanisms associated with load carrying and walking stability remain illusive. The objective of the current study was to apply local dynamic stability measure in walking while carrying a load, and to investigate the possible adaptive gait stability changes. Methods: Current study involved 25 young adults in a biomechanics research laboratory. One tri-axial accelerometer was used to measure three-dimensional low back acceleration during continuous treadmill walking. Local dynamic stability was quantified by the maximum Lyapunov exponent (maxLE) from a nonlinear dynamics approach. Results: Long term maxLE was found to be significant higher under load condition than no-load condition in all three reference axes, indicating the declined local dynamic stability associated with load carrying. Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.47-55
• /
• 2015

With using adaptive control of the resistance spot welding machine, the advantage on electrode life time for galvanized steels has been addressed. This study was aimed to evaluate the electrode life time of galvanized steels with applying the constant current control and the adaptive control resistance spot welding process for a comparison purpose. The growth in diameter of electrode face was similar for both the constant current and the adaptive control up to 2000 welds. The button diameter was decreased with weld numbers, however, sudden increase in button diameter with use of the adaptive control after 1500 welds was observed. The peak load was continuously decreased with increasing number of welds for both the constant current and the adaptive control. The current compensation during a weld was observed with using the adaptive control after 1800 welds since the ${\beta}$-peak on dynamic resistance curve was detected at later weld time. The current compensation with adaptive control during resistance spot welding enhanced the nugget diameter at the faying interface of steel sheets and improved the penetration to thinner steel sheet.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제10권4호
• /
• pp.93-100
• /
• 2021

블록체인의 확장성 문제를 해결하기 위한 이더리움 샤드 시스템은 부하 균형 문제가 존재하며 이는 그래프 분할 문제로 모델링된다. 본 논문에서는 게임 이론의 협상 해법을 사용하여 이더리움 샤드 시스템의 상반된 효용에 대한 협상이 가능한 적응적 온라인 가중그래프 분할 알고리즘을 제안한다. 게임 이론의 협상 해법은 상반된 효용의 협상점을 공정하게 결정할 수 있는 공리적 해법이다. 제안 알고리즘은 기존 온라인 그래프 분할 알고리즘을 가중그래프에 적용할 수 있도록 개선하였으며 대표적인 교섭 해법인 내쉬 협상 해법을 확장한 확장 내쉬 협상 해법을 사용하여 이더리움 시스템 상황을 고려한 설계를 통해 효과적으로 부하 균형을 수행하였다. 실험 결과, 대표적인 온라인, 오프라인 그래프 분할 알고리즘에 비해 최대 37% 우수한 성능을 보였다.

• 한국멀티미디어학회논문지
• /
• 제6권7호
• /
• pp.1209-1218
• /
• 2003

다수의 사용자 요구에 의해 비디오 타이틀을 실시간으로 제공해야 하는 VOD 서비스는 클라이언트의 버퍼 안정화와 재생 질 보증을 위해서, 네트워크의 상태에 따라 드로핑 (Dropping)이나 스키핑(Skipping) 알고리즘으로 프레임을 전송하는 메카니즘이 필요하다. 본 논문에서는 네트워크의 부하에 따라 저장 장치에서 생략 인출한 MPEG 프레임 (I, P, B 프레임)을 클라이언트에 전송하는 알고리즘을 제시한다. 또한 시뮬레이션을 통해 네트워크의 부하에 적응적으로 대처하여 네트워크의 부하를 줄이고 클라이언트의 수신 버퍼를 안정화시킬 수 있음을 검증한다.

• Journal of Communications and Networks
• /
• 제10권1호
• /
• pp.38-43
• /
• 2008

In this paper, adaptive channel borrowing approach fuzzy neural networks for load balancing (ACB-FNN) is presented to maximized the number of served calls and the depending on asymmetries traffic load problem. In a wireless network, the call's arrival rate, the call duration and the communication overhead between the base station and the mobile switch center are vague and uncertain. A new load balancing algorithm with cell involved negotiation is also presented in this paper. The ACB-FNN exhibits better learning abilities, optimization abilities, robustness, and fault-tolerant capability thus yielding better performance compared with other algorithms. It aims to efficiently satisfy their diverse quality-of-service (QoS) requirements. The results show that our algorithm has lower blocking rate, lower dropping rate, less update overhead, and shorter channel acquisition delay than previous methods.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권10호
• /
• pp.587-594
• /
• 2005

An adaptive observer for rotor resistance is designed to estimate rotor flux for the a-b model of an induction motor assuming that rotor speed and stator currents are measurable. A singularly perturbed model of the motor is used to design an Adaptive sliding mode observer which drives the estimated stator currents to their true values in the fast time scale. The adaptive observer on the sliding surface is based on the equivalent switching vector and both the estimated fluxes and the estimated rotor resistance converge to their true values. A speed controller considering the effects of parameter variations and external disturbance is proposed in this paper. First, induction motor dynamic model at nominal case is estimated. based on the estimated model, speed controller is designed to match the prescribed speed tracking specifications. Then a dead-time compensator and a robust controller are designed to reduce the effects of parameter variations and external disturbances. the desired speed tracking control performance can be preserved under wide operating range, and good speed load regulating performance. Some simulated results are provided to demonstrate the effectiveness of the Proposed controller.

• 한국정보통신학회논문지
• /
• 제9권6호
• /
• pp.1241-1246
• /
• 2005

멀티미디어 통신의 실현 및 주파수의 유효이용을 위해 불가결한 다중마이크로 셀 환경에서의 효율적인 시스템 구성을 위해서는 정보의 종류 및 트래픽의 시간적인 변동에 대해서 유연한 접속 제어가 필요하다. 본 논문에서는 높은 시스템 용량을 실현하기 위해, 송신 단말의 평균 SNR에 대응하여 변조 파라미터를 동적으로 설정하는 저속적응변조 방식과 트래픽 상황에 대응하여 TDMA 데이터 슬롯 수를 가변으로 하는 다중슬롯 할당 방식을 조합시켰다. 적응 다중슬롯 할당 방식을 제안하고, 제안방식의 평균 메시지 지연 특성을 시뮬레이션에 의해 평가한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권11호
• /
• pp.575-582
• /
• 2001

This paper presents a calculating method of switching angle for adaptive switched reluctance motor (SRM) drive of a drill. The operation of the SRM is completely characterized by the flux linked by one phase winding which depends only on the current in that same phase winding and the rotor position. An efficiently adaptive SRM drive is possible on appropriately scheduling the commutation angles with accurate rotor position, supplied current value and speed information. An adaptive SRM drive with reduction torque ripple should be controlled by an optimized phase current control along with rotor position. Therefore, we are suggested a computing method of switching turn-on and off angles for adaptationally SRM operation with varied rotor speed and load. To probe the computing method, we have some simulation and experiment, it is shown a good result that can be computing the optimized switching angles for an electric drill motor.