• 유기물자원화
• /
• 제8권4호
• /
• pp.147-152
• /
• 2000

남은 음식물을 기질로 생균효모사료를 만들기 위해 Kluyveromyces marxianus 효모의 호기적 액상발효가 $35^{\circ}C$에서 시도되었다. 먼저 액상으로 시료를 충분히 마쇄시킨 시료의 효모 생균수를 증가시키기 위한 적정발효조건이 진탕배양을 통해 연구되었다. 시료로 사용된 남은 음식물의 고형분 함량을 수분첨가로 5%, 10%와 15%로 다르게 조정하여 발효시킨 결과 고형분 함량 10%에서 생균수가 가장 높은 것으로 나타났다. 효모의 생균농도를 증가시키기 위하여 Aspersillus oryzae를 2리터용 jar fermenter를 이용하여 혼합배양한 결과 증식속도를 증가시켜 주었으나 최고 생균수는 $3.5{\times}10^9/ml$로서 단독 배양시보다 근소하게 높은 결과를 보여주었다.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1470-1475
• /
• 2009

The seed coat of the black soybean contains 3 main anthocyanins such as delphinidin-3-O-$\beta$-glucoside, cyanidin-3-O-$\beta$-glucoside, and petunidin-3-O-$\beta$-glucoside. As a part of our effort on discovering and breeding new black soybean cultivars which possesses specific anthocyanin component rich, we determined the anthocyanin profiles of the 2 cultivars recently developed soybean cv. Gaechuck #1 and cv. Gyeongsang #1, using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and compared their content and identity with those of previously known 10 cultivar controls. The Cosmosil-$5C_{18}$-AR-II column were selected for the analysis because of the best peak separation. The column temperature was set up at $35^{\circ}C$. The mobile phase consisting of water containing 0.5%(v/v) formic acid and methanol gave good separation between the 3 anthocyanin analytes and internal standard (quercetin 3-O-$\beta$-rutinoside) and peaks with suppressed tail. The MS/MS spectra of each individual anthocyanin standard were detected in positive electron spray ionization (ESI) modes. It was disclosed that the anthocyanin contents of the soybean cv. Gaechuck#1 and cv. Gyeongsang#1 are roughly higher than those of the 10 controls.

• 한국분무공학회지
• /
• 제7권3호
• /
• pp.38-44
• /
• 2002

The purpose of this study is to investigate the effect of the volume fraction of water and injection pressure on the spray characteristics of water/oil emulsified fuel injected from the pressure swirl atomizer. The mixture of light oil and water by using impeller mixer was performed. The spray characteristics such as SMD and velocity were measured using PDPA. The injection pressures were 7.5, 100, 200 and $300kgt/cm^2$ and volume fractions of water in emulsified fuel were 0, 10, 20 and 30%, respectively. The measurement sections were at 30, 60 and 90mm from injection nozzle tip. SMD and velocity of emulsified fuel were larger gradually by increasing the volume fraction of water in emulsified fuel. The spray angle was decreased and axial velocity was increased with increase in water content. It was found that the relative SMD ratio was increased more greatly than the relative axial velocity ratio in super critical pressure. The relative SMD ratio was increased and the relative axial velocity ratio was decreased with increase injection pressure at spray downstream.

• 대한기계학회논문집B
• /
• 제33권8호
• /
• pp.604-612
• /
• 2009

Water management has been recognized as a crucial factor for achieving better performance and stability in polymer electrolyte membrane fuel cells (PEMFCs). Proper water management should provide favorable water conditions, including the local humidity, membrane water content, and liquid water saturation in PEMFCs, thereby leading to more uniform electrochemical reaction and current generation. In this study, computational fluid dynamics (CFD) simulation was conducted to investigate the effects of the cathode relative humidity (RH) on the performance of a 3 by $3\;cm^2$ PEMFC with serpentine flow fields. The CFD results showed that the best performance of the PEMFC was obtained for the cathode RH of 80%, but the performance variation was small for the cathode RH range of $60{\sim}100%$. However, the loss of the PEMFC performance was significant when the cathode RH was reduced below 40%. The reason for such performance variation was investigated through the detailed inspection of ohmic loss, activation and concentration overpotential, and water and current distributions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.501-504
• /
• 2005

This paper discusses the development of drying shrinkage reducing type superplasticizer(DSRS) by varying dosage of polycarboxylic based superplasticizer, liquid type expansive admixture and antifoaming agent. Adequate mixture proportion of each admixture is fixed at 0.3$\%$ of superplasticizer, 0.15$\%$ of liquidtype expansive admixture and 0.0005$\%$ of antifoaming agent to insure the improvement in drying shrinkage as well as comparable to the slump and air content of conventional concrete. With this mixture proportion, compressive strength of concrete using DSRS is comparable to that of conventional concrete. The use of DSRS studied by the authors has a favorable effect on reducing drying shrinkage due to the effect of water content and expansion by expansive admixture.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.365-369
• /
• 2013

Coal ash is known to contain a noticeable amount of valuable elements, including transition metals and lanthanides. Therefore it is quite actual problem to extract them for metallurgy and other applications. This paper presents the results of high gradient magnetic and mechanical separation, microscopy, element analyses and optical spectroscopy of brown coal ash taken from the combustion camera and chimney-stalk of Angren thermal power station. The separated magnetic fraction was 3.4 wt.%, where the content of Fe in ferrospheres increased to 58 wt.%. The highest contents of Fe and rare earth elements were found in the fine fractions of $50-100{\mu}m$. Optical absorption spectroscopy of water solutions of the magnetic fractions revealed $Fe^{2+}$ and $Fe^{3+}$ ions in the ratio of ~1:1. The separated coal ash could be used for cleaning of technological liquid waste by means of the high gradient magnetic field.

• Natural Product Sciences
• /
• 제24권3호
• /
• pp.199-205
• /
• 2018

To determine the optimum extraction conditions that give the highest yield of isoquercitrin and caffeic acid from Aster scaber, the effects of four extraction variables (solvent concentrations, extraction time, number of repeated extraction, and solvent volumes) on isoquercitrin and caffeic acid yield was examined via HPLC-UV. Our results showed that the highest extract and isoquercitrin yield were observed when A. scaber was extracted with 450 mL distilled water for 8 hr repeatedly for three times. In case of caffeic acid, the content was higher in the two repeated extracts. Also, content analysis of isoquercitrin in Aster species was performed in which A. fastigiatus, A. ageratoides, and A. scaber exhibited the highest isoquercitrin content at 6.39, 5.68, and 2.79 mg/g extract, respectively. In case of caffeic acid, the highest content of A. scaber and A. glehni was 0.64 and 0.56 mg/g extract, respectively. This study reports an optimized method for extraction of isoquercitrin and caffeic acid from A. scaber and evaluates potential sources of the compounds.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1609-1618
• /
• 2000

Thin stillage and distillers' grains are byproducts remaining after alcohol distillation from a fermented cereal grain mash. Both byproducts are used as energy and protein sources for ruminants. Due to its liquid nature, more than 50% of thin stillage bypasses the rumen. Thin stillage can be fed alone or in combination with distillers' grains. However, a better utilization by beef cattle is anticipated when thin stillage replaces water as a fluid source. Ruminal undegraded protein content of distillers' grains is greatly affected by type of cereal grain and by drying. Corn distillers' grains have a higher ruminal undegraded protein content than wheat distillers' grains while dried distillers' grains have a higher ruminal undegraded protein content than the wet distillers' grains. Wet and dried distillers' grains can replace up to 50% of corn grain in beef cattle diets without affecting animal performance. The estimated NEg of corn distillers' grains for beef cattle ranges from 100 to 169% of that of corn. In general, wet corn distillers' grains have a higher NEg value than dried corn distillers' grains and the addition of thin stillage improves the NEg of distillers' grains. Improved performance of ruminats fed distillers' byproducts can be attributed to high digestible fiber content, improved rumen environment and a shift in organic matter digestion from the rumen to the small intestine.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.23-28
• /
• 2013

Epoxy resins are widely used in microelectronics packaging such as printed circuit board and encapsulating for semiconductor manufacturing. Water can diffuse into and through the epoxy matrix systems and moisture absorption at boarding interfaces of matrix resin systems can lead to a hydrolysis at the interfaces resulting in delamination of encapsulating materials. In the study, the changes of diffusion coefficient and moisture content ratio of epoxy resin systems with nano-sized fillers according to the change of liquid type epoxy resins were investigated. RE-304S, RE-310S, RE-810NM and HP-4032D as a epoxy resin, Kayahard AA as a hardener, and 1B2MI as a catalyst were used in these epoxy resin systems. After curing, moisture content ratios were measured with time under the 85 and 85% relative humidity condition using a thermo-hydrostat. The maximum moisture absorption ratio and diffusion coefficient of EMC decrease with the filler content. It can be seen that these decreases are due to the increase of filler surface area and the decrease of moisture through channel with the content of nano-sized filler.

• 한국지반공학회지:지반
• /
• 제10권4호
• /
• pp.153-166
• /
• 1994

본 논문에서는 연속재하압밀시험을 적용하여 준설토의 거동을 연구하고 얇은 판을 이용하여 준설토의 강도 시험을 실시하는 새로운 실험 방법을 고안하여 실험을 하였다. 이 경우 준설토의 유동적 특성은 Bingham 모델로 설명할 수 있다. 이러한 방법을 위하여 정적 관입시험과 유동적 관입시험을 실시하였는데 두 방법은 모두 합 리적이고 실용성이 있었다. 특히 실험을 통하여 얻은 결론에 따르면 점토질이 많은 흙이나 실트 질 흙 모두에 대해서 함수비가 액성한계의 두배보다 적어지면 강도가 급격히 증가하는 반면,소 성지수의 경우 소성지수로 정규화한 함수비값이 실트는 10, 점토는 5이하가 되면서 소성지수로 정규화한 함수비값의 강도가 급격히 증가함을 알 수 있었다.