입자를 부유 상태에서 소성할 수 있는 수직로를 이용하여 2 mm 이하 크기의 경량 세골재를 제조하고 그 물리적 특성을 고찰하였다. $1200{\sim}1300^{\circ}C$에서 소성된 대부분 시편은 표면에 다량의 액상이 발달하였고 따라서 내부의 가스가 팽창하여 다공성의 중앙부와 상대적으로 치밀한 표피층이 형성되었다. 특히 압출 성형체를 파쇄시켜 얻은 부정형의 C 계열 시편은 $1300^{\circ}C$ 이상으로 소결하면 내부에 가스가 팽창하여 시편 전체가 부풀어져서 구형으로 되었다. 본 부유 수직로에서 소성된 시편의 겉보기 비중은 $0.68{\sim}1.08$ 범위로 대부분 물에 뜰 정도의 경량이었다. 제조된 경량 세골재의 흡수율은 기공율과 비례하였고, 따라서 내부 기공들이 완전 고립된 폐쇄기공은 아님을 나타내었다. 부유소성로에서 제조된 세골재는 전기 머플로에서 소성된 시편과 비슷한 물성을 나타내었으나, 전기로에서 나타나는 골재 간 융착 현상이 발생하지 않았다. 수직로에서 부유소성된 세골재의 내충격성은 자연골재보다 다소 낮았으나, 단위용적중량은 KS 규격 기준을 만족하였다.
The existence of a large sodium pool in the KALIMER, a pool-type LMR developed by the Korea Atomic Energy Research Institute, plays an important role in reactor safety and operability because it determines the grace time for operators to cope with an abnormal event and to terminate a transient before reactor enters into an accident condition. A two-dimensional hot pool model has been developed and implemented in the SSC-K code, and has been successfully applied for the assessment of safety issues in the conceptual design of KALIMER and for the analysis of anticipated system transients. The other important models of the SSC-K code include a three-dimensional core thermal-hydraulic model, a reactivity model, a passive decay heat removal system model, and an intermediate heat transport system and steam generation system model. The capability of the developed two-dimensional hot pool model was evaluated with a comparison of the temperature distribution calculated with the CFX code. The predicted hot pool coolant temperature distributions obtained with the two-dimensional hot pool model agreed well with those predicted with the CFX code. Variations in the temperature distribution of the hot pool affect the reactivity feedback due to an expansion of the control rod drive line (CRDL) immersed in the pool. The existing CRDL reactivity model of the SSC-K code has been modified based on the detailed hot pool temperature distribution obtained with the two-dimensional pool model. An analysis of an unprotected transient over power with the modified reactivity model showed an improved negative reactivity feedback effect.
Park, Da-Min;Jeon, Sang Kwon;Yang, Jin Yong;Choi, Sung Dae;Kim, Geon Joong
Bulletin of the Korean Chemical Society
/
제35권6호
/
pp.1720-1726
/
2014
(S)-Alanine Racemase Chiral Analogue ((S)-ARCA) was used as an efficient adsorbent for the selective separation of D-amino acids (D-AAs), which are industrially important as chiral building blocks for the synthesis of pharmaceutical intermediates. The organic phase, containing (S)-ARCA adsorbent and phase transfer reagents, such as ionic liquid type molecules (Tetraphenylphosphonium chloride (TPPC), Octyltriphenylphosponium bromide (OTPPBr)), were coated on the surfaces of mesoporous carbon supports. For the immobilization of chiral adsorbents, meso/macroporous monolithic carbon (MMC), having bimodal pore structures with high surface areas and pore volumes, were fabricated. The separation of chiral AAs by adsorption onto the heterogeneous (S)-ARCA was performed using a continuous flow type packed bed reactor system. The effects of loading amount of ARCA on the support, the molar ratio of AA to ARCA, flow rates, and the type of phase transfer reagent (PTR) on the isolation yields and the optical purity of product D-AAs were investigated. D-AAs were selectively combined to (S)-ARCA through imine formation reaction in an aqueous basic solution of racemic D/L-AA. The (S)-ARCA coated MMC support showed a high selectivity, up to 95 ee%, for the separation of D-type phenylalanine, serine and tryptophan from racemic mixtures. The ionic liquids TPPC and OTPPBr exhibited superior properties to those of the ionic surfactant Cetyltrimethyl ammonium bromide (CTAB), as a PTR, showing constant optical purities of 95 ee%, with high isolation yields for five repeated reuses. The unique separation properties in this heterogeneous adsorption system should provide for an expansion of the applications of porous materials for commercial processes.
한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
/
pp.529-529
/
2006
Several laboratories worldwide have demonstrated the feasibility of producing amorphous silicon thin film transistor (TFT) arrays at temperatures that are sufficiently low to be compatible with flexible foils such as stainless steel or high temperature polyester. These arrays can be used to fabricate flexible high information content display prototypes using a variety of different display technologies. However, several questions must be addressed before this technology can be used for the economic commercial production of displays. These include process optimization and scale-up to address intrinsic electrical instabilities exhibited by these kinds of transistor device, and the development of appropriate techniques for the handling of flexible substrate materials with large coefficients of thermal expansion. The Flexible Display Center at Arizona State University was established in 2004 as a collaboration among industry, a number of Universities, and US Government research laboratories to focus on these issues. The goal of the FDC is to investigate the manufacturing of flexible TFT technology in order to accelerate the commercialization of flexible displays. This presentation will give a brief outline of the FDC's organization and capabilities, and review the status of efforts to fabricate amorphous silicon TFT arrays on flexible foils using a low temperature process. Together with industrial partners, these arrays are being integrated with cholesteric liquid crystal panels, electrophoretic inks, or organic electroluminescent devices to make flexible display prototypes. In addition to an overview of device stability issues, the presentation will include a discussion of challenges peculiar to the use of flexible substrates. A technique has been developed for temporarily bonding flexible substrates to rigid carrier plates so that they may be processed using conventional flat panel display manufacturing equipment. In addition, custom photolithographic equipment has been developed which permits the dynamic compensation of substrate distortions which accumulate at various process steps.
연료링의 위치 및 열차폐 코팅의 종류에 따른 연소기의 재생냉각 특성을 검토하였다. 연료링을 노즐의 중간 부분에 위치시키고 냉각채널을 분기시켜서 설계하는 방법이 열적으로 타당함을 확인하였다. 또한 복합재를 이용한 노즐확장부가 적용 가능한 기술적 상황이라면, 팽창비가 높고 열유속이 낮은 노즐 후류 부분은 이를 이용하는 것이 매우 적절하다고 판단된다. 적용 가능한 열차폐 코팅 중에서 30톤급 연소기 및 가스발생기 개발과정에서 사용했던 $Y_2O_3$ stabilized $ZrO_2$과 내산화성이 우수한 Ni/Cr을 고려하였다. 내산화성이 우수한 Ni/Cr에 비해 세라믹 코팅($Y_2O_3$ stabilized $ZrO_2$)이 열차폐 효과가 우수한 것으로 파악되었다.
드라이아이스 스노우 젯(dry ice snow jet)을 액체 이산화탄소의 고압팽창에 의해 만들고 운반기체에 의해 더욱 가속시킬 수 있었다. 코팅의 제거기구는 표면 오염입자의 그것과 크게 다르지 않았다. 코팅의 제거를 Hutchings 식으로 정량적으로 표현할 수 있었다. 이들 식에 의한 plot에서 얻은 두개의 매개변수로 코팅의 제거 속도와 단위 이산화탄소의 질량에 의해 제거된 비 코팅면적을 예측할 수 있었으며 아울러 실험데이터의 신뢰도와 실험 에러의 보정도 가능하게 되었다. 노즐 기판 거리와 노즐길이를 바꾸었을 때 얻어진 이들 plot이 한점에서 만날 수 있음을 알 수 있었으며 이점이 jet plume을 모음에서 얻어진 scar 반경의 증대효과와 jet를 확산시킴에서 얻어진 scar 반경 증대효과가 균형을 맞추는 데서 얻어진 것으로 판단된다.
본 연구는 ethylene oxide로부터 monoethylene glycol을 주제품으로 생산하는 상용화된 실제 공정의 생산 능력 증가시에 필요한 공정 모사와 에너지 절감을 위한 최적화 연구로서, 공정에 관여하는 다성분계의 기/액 상평형 거동을 NRTL-RK식으로 나타내고, 필요한 총 91개의 2성분계쌍의 상호작용 파라미터 값들로는 8개의 2성분계쌍에 대해서는 Aspen $Plus^{TM}$ 상용 모사기(Ver. 2006)에 내장된 값, 28개의 쌍에 대해서는 상평형 데이터를 문헌에서 조사하여 회귀분석하고 나머지 2성분계에 대해서는 모사기 내의 추산 기능을 이용하여 구한 값을 사용하였으며, 공정 모사 결과와 실제 공정 데이터와의 비교를 통해 상평형 계산의 정확성을 확인한 후, 모사기에 내장된 민감도 분석 기능을 사용하여 전체 에너지 소모량에 대한 각 장치의 민감도를 조사하여 적절한 조절변수를 선정하고 모사기 내에 내장되어 있는 순차적 2차 계획법에 의한 최적화 기능을 이용하여 공정 전체의 에너지 절약을 위한 최적화 작업을 수행하였다.
액체 탄산의 단열팽창하여 얻은 드라이아이스 snow로부터의 펠렛제조기와 이들 펠렛을 이용한 표면 세정용 블래스팅 장치를 설계 제작하였다. 본 블래스팅 장치는 적은 압력과 적은 량의 공기로도 다양한 오염물질 녹, 기름때, 라커막, 페인트 제거에 강한 세정력을 얻을 수 있었다. 이 때 호퍼 용량은 12 kg이고, 펠렛 분사량은 0-1.2 kg/min 까지 조절이 가능하였다. 드라이아이스 펠렛의 impact는 한계 거리 안에서는 거리에 무관하며, 드라이아이스 분사의 impact stress, 각도 및 질량 속도에 의존하였다. 또한 블래스팅의 세정력은 impact와 대상 물질의 열적 성질 및 표면 조도에 의존하였으며, 유리, 구리, 황동, 강철, 아크릴 기판의 순서로 감소하였다. 그리고 세정 속도는 같은 기판에 붙은 오염물의 경도, 부착력에 의존하였으며 그리스, 에폭시, 페인트 순으로 감소하였다. 사용 중 소음도는 대략 85-100 dBA이었다.
연소기 챔버 노즐확장부 외피구조물의 성형특성에 대한 연구를 수행하였다. 노즐확장부 외피구조물의 제작에 사용되는 냉간압연 판재가 갖는 이방성 특성을 확인하기 위하여 세 가지 방향의 시편을 제작하여 인장시험을 수행하였으며, 그 결과를 이용하여 Lankford 값을 얻어 구조해석에 적용하였다. 실물형 연소기에 사용될 노즐확장부 외피구조물의 제작 및 성형공정을 통하여 외피구조물의 성형특성을 확인하였으며, 성형으로 얻은 변형률들을 구조해석 결과들과 비교하였다. 본 연구에서 얻은 결과들은 확대비가 더 큰 노즐확장부 제작을 위한 치구 및 성형공정의 설계에 활용될 예정이다.
연료링의 위치 및 열차폐 코팅의 종류에 따른 연소기의 재생냉각 특성을 검토하였다. 연료링을 노즐의 중간 부분에 위치시키고 냉각채널을 분기시켜서 설계하는 방법이 열적으로 타당함을 확인하였다. 또한 복합재를 이용한 노즐확장부가 적용 가능한 기술적 상황이라면, 팽창비가 높고 열유속이 낮은 노즐 후류 부분은 이를 이용하는 것이 매우 적절하다고 판단된다. 적용 가능한 열차폐 코팅 중에서 30톤급 연소기 및 가스발생기 개발과정에서 사용했던 $Y_2O_3$ stabilized $ZrO_2$과 내산화성이 우수한 Ni/Cr을 고려하였다. 내산화성이 우수한 Ni/Cr에 비해 세라믹 코팅($Y_2O_3$ stabilized $ZrO_2$)이 열차폐 효과가 우수한 것으로 파악되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.