• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1553-1555
• /
• 2003

Coatings on glass with highly transparent conducting oxide films(TCOs) are performed mostly by using indium tin oxide(ITO). This Oxide material is very common for applications where both high electrical conductivity. Photovoltaic cells, transparent electrical heater, selective optical filter, and a optical transmittance are essential. In this study, ITO thin films were deposited on $SiO_2$/soda-line glass plates by a dc magnetron sputtering technique. The crystallinity and electrical properties of the films were investigated by X-ray diffraction(XRD), atomic force microscopy(AFM) scanning and 4-point probe. The optical transmittance of ITO films in the range of 300-800nm were measured with a spectrophotometer. As a result, we obtained polycrystalline structured ITO films with (222), (400), and (440) peak. Transmittance of all the films were higher than 90% in the visible range.

• 한국안전학회지
• /
• 제11권1호
• /
• pp.67-74
• /
• 1996

In order to investigate the effect and reliability coming up to properties of the matter due to the change of solid structure in dielectrics, the effect of dielectric characteristics for thermal treated LDPE film was made researches. Specimens of LDPE with thickness 100 [$\mu\textrm{m}$] were investigated into the change of solid structure by ageing. Thermal treated specimen were made, that were after applying heat at 100 [$^{\circ}C$] for 1 [hour] \circled1 air-cooled specimen slowly, \circled2 water-cooled specimen under the ,com temperature, \circled3 liquid nitrogen gas-cooled specimen rapidly. With specimen of thermal treated three types turn out and original, it was for dielectric characteristics to be experimented in the temperature range of 20~120 [$^{\circ}C$], frequency range of 30~1.5${\times}10^5/$[Hz], appling voltage from 300 to 1500[㎷]. Consequently, the degree of crystallinity was changed with 49~57 [%] according to the thermal treatment. In case of frequency, 100 [Hz], on the thermal dependance in dielectric characteristics, tan decreases due to cooling method.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.42-47
• /
• 2000

The amorphous vanadium oxide thin films for thin-film rechargeable lithium batteries were fabricated by r.f. reactive sputtering at room temperature. As the experimental parameter, oxygen partial pressure was varied during sputtering. At high oxygen partial pressures(>30%), the as-deposited films, constant current charge/discharge characteristics were carried out in 1M $LiPF_6$, EC:DMC+1:1 liquid electrolyte using lithium metal as anode. The specific capacity of amorphous $V_2O_5$ after 200cycles of operation at room temperature was higher compared to crystalline $V_2O_5$. The amorphous vanadium oxide thin film and crystalline film showed about 60$\mu$Ah/$\textrm{cm}^2\mu\textrm{m}$ and about 38$\mu$Ah/$\textrm{cm}^2\mu\textrm{m}$, respectively. These results suggest that the battery capacity of the thin film vanadium oxide cathode strongly depends on the crystallinity.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1553-1557
• /
• 2018

Gallium nitride (GaN) nanoparticles are synthesized by the gallium particle trapping effect in a $N_2$ nonthermal plasma with metallic Ga vapor. A proposed method has an advantage of synthesized GaN nanoparticle purity because the gallium vapor from the inductively heated tungsten boat does not contain any impurity source. The synthesized particle size can be controlled by the amount of Ga vapor, which is adjusted using the plasma emission ratio of nitrogen to gallium, owing to the particle trapping effect. The synthesized nanoparticles are investigated by electron microscopy studies. High-resolution transmission electron microscopy (HRTEM) studies confirm that the synthesized GaN nanoparticles (10-40 nm) crystallize in a single-phase wurtzite structure. Room-temperature photoluminescence (PL) measurements indicate the band-edge emission of GaN at around 378 nm without yellow emission, which implies that the synthesized GaN nanoparticles have high crystallinity.

• 전기화학회지
• /
• 제15권4호
• /
• pp.236-241
• /
• 2012

일반적으로 그라파이트는 높은 결정성으로 인해 나노입자상으로 제조하기 어려우며 특히 표면에 친수성을 부여하기가 쉽지 않은 재료로 알려져 왔다. 본 연구에서는 박막 증착에 널리 활용되어 오던 펄스 레이저 어블레이션 기법을 액상에 적용하여 친수성이 부여된 그라파이트 나노입자를 합성하였다. 타겟으로는 그라파이트 로드를 사용하였으며 레이저 출력을 조절하며 액상에서 어블레이션을 실시한 결과 매우 높은 분산 안정성을 갖는 친수성 그라파이트 나노입자를 합성할 수 있었다. FT-IR 분석결과 합성된 친수성 그라파이트 나노입자는 카르복시기 및 카르보닐기 등이 나노입자의 형성과 동시에 표면에 도입된 것이 밝혀졌으며 이는 제타 포텐셜로도 확인할 수 있었다. 최종적으로 Polyethyleneglycol(PEG)과 컴포지트하여 아세톤 센서에 적용한 결과 기존의 카본 블랙 대비 우수한 감도를 나타내었다.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.498-502
• /
• 2002

Liquid Phase Epitaxy(LPE)법을 사용하여 SGGG(111) 기판 위에 $PbO/B_2O_3$를 융제로 Yttrium Iron Garnet($Y_3Fe_5O_{12}$, YIG) 후막을 성장하였다. 기판 회전속도와 과냉도 등의 성장변수가 YIG 후막의 결정성, 화학조성 그리고 성장속도에 미치는 영향에 대하여 고찰하였다. 성장온도가 860~910${\circ}C$까지 증가함에 따라 막의 FWHM 값은 감소하였고, 성장오도 910${\circ}C$, 120rpm의 시편회전속도에서 $60{\mu}m/h$ 이상의 높은 성장률을 나타내었다.

• 공업화학
• /
• 제8권2호
• /
• pp.339-346
• /
• 1997

액정 polyurethane은 DMF 용매중 1,4-bis(6-hydroxyhexoxy)benzene (BHB6)과 2,5-tolylene diisocyanate (2,5-TDI)를 중부가 반응에 의해서 합성하였다. 고유점도는 0.26, $0.42d{\ell}/g$였다. 생성된 polyurethane의 열적성질 및 구조확인은 DSC, 편광현미경, X-ray회절 그리고 $^1H$-NMR 및 FT-IR에 의해 확인하였다 특히 분자량이 서로 다른 polyurethane 2,5-TDI/BHB6의 열적성질 및 물성에 대해서 비교 검토하였다. 고유점도가 [${\eta}$]=0.26인 polyurethane 2,5-TDI/BHB6는 monotropic 액정성을 나타내었다. 이러한 것은 구조적으로는 mesogen을 포함하고 있지 않다. 예를 들면 LCPU-L(저분자량)은 $T_{I-LC}$(등방성액체상전이점-액정) 및 $T_{LC-K}$(액정-결정)은 $122^{\circ}C$부터 $89^{\circ}C$까지 관찰되었다.

• 공업화학
• /
• 제4권2호
• /
• pp.403-408
• /
• 1993

키틴과 프로필렌 옥시드를 반응시켜 히드록시프로필 키틴(HPCH)을 얻었고 할로겐화 유기용매내에서 HPCH의 액정형성능을 관찰하였다. 키틴과 HPCH의 고체 $^{13}C$ NMR 스펙트럼 분석 결과 히드록시프로필기의 도입을 확인하였다. 원소분석결과 히드록시프로필기의 치환도는 0.8정도였다. WAXD패턴 측정결과 키틴에 히드록시프로필기가 도입됨에 따라 결정성은 감소하였고 유기용매에 대한 용해도는 증가하였다. HPCH를 디클로로아세트산과 1, 2-디클로로에탄 혼합용매에 녹여 편광현미경으로 관찰한 결과 25% 이상의 용액농도에서 콜레스테릭 액정상에서 전형적으로 관측되는 지문영역이 나타남을 알 수 있었다. 용액의 점도는 시간변화에 따라 감소함을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.354-354
• /
• 2012

In this study, we report the vertically aligned ZnO nanowires by using different type of Ga-doped ZnO (GZO) thin films as seed layers to investigate how the underlying GZO film micro structure affects the distribution of ZnO nanowires. Arrays of highly ordered ZnO nanowires have been synthesized on GZO thin film seed layer prepared on p-Si substrates ($7-13{\Omega}cm$) with utilize of a pulsed laser deposition (PLD). With the vapor-liquid-solid (VLS) growth process, the ZnO nanowire synthesis carries out no metal catalyst and is cost-effective; furthermore, The GZO seed layer facilitates the uniform growth of well-aligned ZnO nanowires. The influence of the growth temperature and various thickness of GZO seed layer have been analyzed. Crystallinity of grown seed layer was studied by X-Ray diffraction (XRD); diameter and morphology of ZnO nanowires on seed layer were investigated by field emission scanning electron microscopy (FE-SEM). Our results suggest that the GZO seed layer with high c-axis orientation, good crystallinity, and less lattice mismatch is key parameters to optimize the growth of well-aligned ZnO nanowire arrays.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.26-31
• /
• 2006

The saccharogenic liquid (SFW) obtained by the enzymatic saccharification of food wastes was used as a medium for production of bacterial cellulose (BC). The enzymatic saccharification of food wastes was carried out by the cultivation supernatant of Trichoderma harziaum FJ1 culture. Acetobacter xylinum KJ1 was employed for the BC production culture. The physical properties, such as polymerization, crystallinity, Young's modulus, and tensile strength, of BCs produced by three culture methods: the static cultures using HS (Hestrin-Schramm) as a reference medium (A) or the SFW medium (B), the shaking culture (C) or the air circulation culture (D) using the SFW medium, were investigated. The degrees of polymerization of BCs produced under the different culture conditions (A-D) showed 11000, 9500, 8500, and 9200, respectively. Young's modulus was 4.15, 5.0, 4.0, and 4.6 GPa, respectively. Tensile strength was 124, 200, 80, and 184 MPa, respectively. All of the BC had a form of cellulose I representing pure cellulose. In the case of the shaking culture, the degree of crystallinity was 51.2%, the lowest degree. Under the other culturing conditions, the trend should remain in the range of 89.7-84%. Overall, the physical properties of BC produced from SFW were similar to those of BC from HS medium, a commercial complex medium, and BC production by the air circulation culture mode brought more favorable results in terms of the physical properties and its ease of scale-up. Therefore, it is expected that a new BC production method, like air circulation culture using SFW, would contribute greatly to BC-related manufacturing.