• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.278-286
• /
• 1995

Phosphate-solubilizing microorganisms were isolated from agricultural area in Korea, and the solubilizing potential of microorganisms was evaluated in vitro. Of the several microorganisms Pseudomonas putida, Penicillium sp., and Aspergillus niger showed solubilization in all phosphatic compounds such as hydroxyapatite, tricalcium phosphate, aluminium phosphate and rock phosphate tested. Inorganic P solubilization was directly related to the pH drop by each microorganisms. Aspergillus niger was found to be more active in solubilizing phosphate than Pseudomonas putida and Penicillium sp.. The maximum concentration of phosphorus released from each of aluminium phosphate, hydroxyapatite and tri-calcium phosphate by Aspergillus niger in liquid culture was 776ppm, 665ppm and 593ppm, respectively when $KNO_3$ was added as nitrogen source. For rock phosphate, it was 411ppm with ammonium sulfate as nitrogen source.

• Microbiology and Biotechnology Letters
• /
• v.48 no.4
• /
• pp.491-505
• /
• 2020

A newly isolated strain, Proteus vulgaris OR34, from olive mill waste was found to secrete an alkaline extracellular lipase at 11 U·ml-1 when cultivated on an optimized liquid medium. This lipase was purified 94.64-fold with a total yield of 9.11% and its maximal specific activity was shown to be 3232.58 and 1777.92 U·mg-1 when evaluated using the pH-stat technique at 55℃ and pH 9 and Tributyrin TC4 or olive oil as the substrate. The molecular mass of the pure OR34 lipase was estimated to be around 31 kDa, as revealed by SDS-PAGE and its substrate specificity was investigated using a variety of triglycerides. This assay revealed that OR34 lipase preferred short and medium chain fatty acids. In addition, this lipase was stable in the presence of high concentrations of bile salt (NaDC) and calcium ions appear not to be necessary for its activity. This lipase was inhibited by THL (Orlistat) which confirmed its identity as a serine enzyme. In addition, the immobilization of OR34 lipase by adsorption onto calcium carbonate increased its stability at higher temperatures and within a larger pH range. The immobilized lipase exhibited a high tolerance to organic solvents and retained 60% of its activity after 10 months of storage at 4℃. Finally, the OR34 lipase was applied in biodiesel synthesis via oleic acid mediated esterification of methanol when using hexane as solvent. The best conversion yield (67%) was obtained at 12 h and 40℃ using the immobilized enzyme and this enzyme could be reused for six cycles with the same efficiency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.197-202
• /
• 2023

Calcium fluoride (CaF₂) single crystal is applied to numerous industrial applications, especially for optical uses. To have excellent optical transmission properties, however, CaF₂ crystals should be carefully fabricated through liquid-phase crystal growth techniques. In this study, as one of the early stage research activities to grow CaF₂ crystals with a good transmittance at the ultraviolet wavelength range, computational thermodynamic models were provided to deepen the understanding of the crystal growing processes of CaF₂ under various conditions. To remove point defects and oxygen impurities in the grown CaF₂ crystals, the system was thermodynamically evaluated to get optimal process conditions. From the reviews of previous experimental studies, computational thermodynamic approaches were found to be an effective and powerful tool to understand the meaning of the crystal growth processes and to obtain optimal process conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.2
• /
• pp.65-70
• /
• 1976

The effect of leaf spray ($80{\ell}$ of 100 times diluted solution per 10a) of three liquid complex fertilizers (Compresal 1 and 2. and 3P) on rice (var, Minehikari) at 10 days before and after heading and 20 days after heading in a farmer's field was investigated by yield components and flag leaf analysis. 1. Leaf spray significantly increased filled grain ratio (at 10% level) and harvest index (at 5% level) suggesting significant yeild increase in uniform field condition. 2. Phosphorus content of flag leaf was in deficient range and increased by leaf spray while iron content was decreased indicating that liquid complex fertilizer supplied phosphorus which ratards iron translocation to the upper leaves. 3. Higher manganese content in flag leaf by leaf spray (significant at 5% level) suggests that phosphorus stimulates manganese translocation to the upper leaves resulting in favorable Fe/Mn balance. 4. Nitrogen concentration in flag leaf was in the insufficient range suggesting that nitrogen in liquid complex fertilzer had to be a nitrogen supply source. 5. In flag leaf calcium concentration was increased by leaf spray but that of boron and zinc was decreased.

• Korean Journal of Organic Agriculture
• /
• v.27 no.4
• /
• pp.453-461
• /
• 2019

The purpose of this study was to evaluate the mixed treatment of compost tea and amino acid liquid fertilizer as a substitute of oil cake for the organic cultivation of maize in Goesan, Chungbuk province. As a result, nitrogen, phosphoric acid, potassium, calcium and magnesium contents of each organic fertilizer were in the order of oil cake > amino acid fertilizer > compost tea. Each of these organic fertilizers had little influence on the change of soil chemical. Individual treatment of amino acid fertilizer and oil cake for weight of an ear as well as all individual treatments for the fresh weight of 100 kernels showed significant increase, compared to the untreated control. For the corn yield of merchantable quality, each treatment of compost tea, amino acid liquid fertilizer and oil cake increased higher 3.9, 5.4 and 5.9% than untreated control, respectively. On the other hand, as a result of mixed treatment of amino acid fertilizer and compost tea, the change of soil chemical property was insignificant. The mixed treatment, Nonetheless, showed significant increase for stem height to 1st ear, grain setting length in an ear, weight of an ear, and fresh weight of 100 kernels, compared to the oil cake as a control. After all, the corn yield of merchantable quality produced by the mixed treatment was 3.9% higher than the control. Therefore, our study would be considered that the mixed treatment of amino acid and compost tea is one of organic materials that can replace oil-cake in maize.

• Nuclear Engineering and Technology
• /
• v.29 no.2
• /
• pp.127-137
• /
• 1997

Equilibrium concentrations of major elements in an underground repository with a capacity of 100,000 drums have been simulated using the geochemical computer code (EQMOD). The simulation has been carried out at the conditions of pH 12 to 13.5, and Eh 520 and -520 mV. Solubilities of magnesium and calcium decrease with the increase of pH. The solubility of iron increases with pH at Eh -520 mV of reducing environment while it almost entirely exists as the precipitate of Fe(OH)$_3$(s) at Eh 520 mV of oxidizing environment. All of cobalt and nickel are predicted to be dissolved in the liquid phase regardless of pH since the solubility limit is greater than the total concentration. In the case of cesium and strontium, all forms of both ions are present in the liquid phase because they have negligible sorption capacity on cement and large solubility under disposal atmosphere. And thus the total concentration determines the equilibrium concentration. Adsorbed amount of iodide and carbonate are dependent on adsorption capacity and adsorption equilibrium constant. Especially, the calcite turns out to be a solubility-limiting phase on the carbonate system. In order to validate the model, the equilibrium concentrations measured for a number of systems which consist of iron, cement, synthetic groundwater and radionuclides are compared with those predicted by the model. The concentrations between the model and the experiment of nonadsorptive elements cesium, strontium, cobalt nickel and iron, are well agreed. It indicates that the assumptions and the thermodynamic data in this work are valid. Using the adsorption equilibrium constant as a free parameter, the experimental data of iodide and carbonate have been fitted to the model. The model is in a good agreement with the experimental data of the iodide system.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.102-105
• /
• 1992

Introduction : Isothiazolinone product is one of new preservatives used in cooling tower, paper mill, and general industrial waters.l) It is also effective in controlling bacteria and fungi in the manufacture and storage of dispersed pigments, such as kaolin clays, titanium dioxide, calcium carbonate and others\ulcorner Its broad-spectrum activity, excellent physical and chemical compatibility with anionic, nonionic and cationic surfactants and most organic and inorganic compounds and low toxicity at recommended use levels provide formulators with an effective, economical, and environmentally acceptable alternative to other commercial biocides. It dose not contain or generate formaldehyde and is easy to formulate (1.5% solution is supplied as an aqueous solution), so that it gains advantage over the other preservatives. The active ingredients of the isothiazolinone product are unchlorinated compound (2-methyl-4-isothiazolin-3-one) and chlorinated one (5-chloro-2-methyl-4-isothiazolin-3-one). Methods preferred for the analysis of preservatives are chromatographic methods, especially high performance liquid chromatograph (HPLC). Although several methods were satisfactory in respect to separation, no offical method has been published for the isothiazolinone components. This study was performed to search for an alternative method in order to show flexible operating conditions of HPLC and to reduce assay time.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1011-1018
• /
• 2005

The influence of liquid shotcrete accelerators(alkali aluminate, two types of alkali-free) was investigated. Comparing to the existing alkali aluminate accelerator, new alkali-free accelerator, AF2, shortened initial and final setting of cement system, and after curing for 1 day compressive strength was analogous with others. On the other hand, compressive strength of specimen cured for 12 hour was the highest by the addition of alkali aluminate accelerator, but final strength was the lowest by that. But compressive strengths of AF1, AF2 were similar to Plain up to 28day. Further from XRD(X-Ray Diffractometer) and DSC(Differential Scanning Calorimeter) analyses, we confirmed that setting promoted by alkali aluminate was mainly because of Ca(OH)2(calcium hydroxide), but the accelerating behavior of alkali-free was influenced by the needle-like ettringite$(6CaO{\cdot}Al_2O_3{\cdot}3SO_3{\cdot}32H_2O)$ crystal.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.683-693
• /
• 2014

This study was carried out to investigate the characteristics of the organic liquid fertilizer and find out optimum fermentation conditions of Effective Microorganisms (EM) including ascidian tunic. During the EM fermentation by adding ascidian tunic, electrical conductivity (EC) was increased, contrast to decrease the pH value, on related to the initial dosage molasses rate. Additionally, the total nitrogen quantity was shown to be increased on EM fermentation and the most effective increasing was recorded up to 220% on more than 15% molasses dosage condition. The phosphorus quantity was to be maximum rate on 21th of EM fermentation, and other contents, such to potassium, calcium, magnesium, sodium, had be shown an increasing patten during the fermentation period. After the EM fermentation, the concentration of hazardous material (Zn, As, Cd, Cu, Cr, Hg, Ni, pb) was measured below than the official criteria for commercial fertilizer. As a effective material in fermentated fertilizer, the 29 kinds free amino acids were detected and their total concentration was measured to 7080.94 mg/L.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).