• 한국재료학회지
• /
• 제21권6호
• /
• pp.309-313
• /
• 2011

The power capacitors used as vehicle inverters must have a small size, high capacitance, high voltage, fast response and wide operating temperature. Our thin film capacitor was fabricated by alumina layers as a dielectric material and a metal electrode instead of a liquid electrolyte in an aluminum electrolytic capacitor. We analyzed the micro structures and the electrical properties of the thin film capacitors fabricated by nano-channel alumina and metal electrodes. The metal electrode was filled into the alumina nano-channel by electroless nickel plating with polyethylene glycol and a palladium catalyst. The spherical metals were formed inside the alumina nano pores. The breakdown voltage and leakage current increased by the chemical reaction of the alumina layer and $PdCl_2$ solution. The thickness of the electroless plated nickel layer was 300 nm. We observed the nano pores in the interface between the alumina layer and the metal electrode. The alumina capacitors with nickel electrodes had a capacitance density of 100 $nF/cm^2$, dielectric loss of 0.01, breakdown voltage of 0.7MV/cm and leakage current of $10^4{\mu}A$.

• 한국결정성장학회지
• /
• 제5권3호
• /
• pp.291-298
• /
• 1995

알루미나 고상소결체와 $CaMgSiO_4$간의 반응에 따른 반응상들의 성장 및 용해 거동을 $1600^{\circ}C$에서 열처리 시간을 변화하여 고찰하였다. 열처리시 알루미나는 $CaMgSiO_4$ 액상에 용융되어 중간에 반응상인 $CaO{\cdot}6Al_2O_3$와 최종 반응상인 $CaMgSiO_4$ 스피넬 형성이 관찰되었다. 중간상인$CaO{\cdot}6Al_2O_3$ 결정은 성장 모양과 용해 모양이 뚜렷하게 구분되었다.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.438-442
• /
• 2015

Porous thick film of alumina which is fabricated by freeze tape casting using a camphene-camphor-acrylate vehicle. Alumina slurry is mixed above the melting point of the camphene-camphor solvent. Upon cooling, the camphene-camphor crystallizes from the solution as particle-free dendrites, with the $Al_2O_3$ powder and acrylate liquid in the interdendritic spaces. Subsequently, the acrylate liquid is solidified by photopolymerization to offer mechanical properties for handling. The microstructure of the porous alumina film is characterized for systems with different cooling rate around the melting temperature of camphor-camphene. The structure of the dendritic porosity is compared as a function of ratio of camphene-camphor solvent and acrylate content, and $Al_2O_3$ powder volume fraction in acrylate in terms of the dendrite arm width.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.359-366
• /
• 1994

Tow types of supports were made using $\alpha$-Al2O3 powder and optimum conditions to prepare for supports were provided. Sol solution for coating was synthesized by sol-gel method with aluminum isopropoxide. Supports were coated and heat-treatemented, where the thickness of coating layer was controlled by dipping time. Flux and permeability of alumina membrane were measured by liquid and gas filtration apparatus and these were compared with the provided model. It was confirmed that the coating was done very well without micro~crack and defect.

• Bulletin of the Korean Chemical Society
• /
• 제15권7호
• /
• pp.592-595
• /
• 1994

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.279-279
• /
• 2006

We report a fabrication of carbon nanotube (CNT) monolayer thin film using liquid-liquid interface. The multiwalled carbon nanotube (MWCNT), which were synthesized by the alumina template method formed a monolayer at the liquid-liquid interface after sonicating the MWCNT water-oil dispersion. Moreover, with the addition of ethanol, the MWCNT monlayer was also formed at the liquid-liquid interface. The monolayer is transferable onto solid substrates and the transferred film was observed using atomic force microscopy (AFM)

• 한국식품위생안전성학회지
• /
• 제5권4호
• /
• pp.213-217
• /
• 1990

커피, 홍차, 녹차중의 카페인 함량을 간단하고 신속하게 정량하는 방법을 검토하였다. 역상계 액체크로마토그래피에 의한 카페인 정량은 메타놀-초산-물(20 : 1 : 79)을 이동상으로 하여 ${\mu}-Bondapak$ C18 컬럼하에서 이루어졌다. 카페인의 검출에는 UV검출기를 사용하여 280 mm에서 행하였다. Sep-Pak alumina A 카트리지를 이용한 간단한 전처리를 통해 효과적으로 카페인의 추출 및 clean-up를 행하였다. 카페인의 첨가 회수율은 95.2~101.3%이었고 분석의 재현성은 상대표준 편차로서 0.10~0.62%이었으며 검출한계는 $0.1;\mu\textrm{g}$/ml이었다.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.504-511
• /
• 2005

The generation of fine relics of inorganic and metallic materials from precursor suspensions is of significant current interest as it holds the key to the fabrication of display and printed circuit board. Some novel printing methods depositing ceramic particles have been suggested in recent years. When a conducting liquid is supplied to a capillary nozzle at a low flow rate and when the interface between air and the liquid is charged to a sufficiently high electrical potential, the liquid meniscus takes the form of a stable cone, whose apex emits a microscopic jet. This is called as a cone-jet mode. In our experiments, an alumina particles flowing through a nozzle were subjected to electro-hydrodynamic printing in the cone-jet mode. The pattern of 'YONSEI' characters was tested at $10 {\mu}l/min$ of alumina ink flow rate and different applied voltages. At an applied voltage of 6 kV, feature size was in the range of $250 {\mu}m.$

• 연구논문집
• /
• 통권30호
• /
• pp.111-119
• /
• 2000

Y-Si oxide 및 oxynitride를 소결 조제로 첨가하여 질소를 함유하는 액상이 알루미나의 소결에 미치는 영향에 대하여 조사하였다. $1400^{\circ}C$에서 하소된 소결 조제의 주 결정상은 $Y_2$$O_3$와 $SiO_2$의 반응에 의하여 생성된 $\alpha$-$Y_2$ $Y_2$$O_7$이며, N의 함량이 높은 Si-40N은 $\alpha$-$Y_2$$O_3$와 함께 Y-N apatite가 생성된다 소결과정에서 소결 조제로 알루미나의 일부와 반응하여 액상을 형성하며, 알루미나는 액상에 의하여 소결이 촉진된다. SEM으로 미세구조를 관찰한 결과 산화물 소결조제(Si-0N)를 첨가한 알루미나는 균일한 입자성장을 보이지만 oxynitride 소결소재(Si-20N 및 Si-40N)를 첨가한 알루미나는 비정상 입자성장을 일으켜 bimodal 구조를 나타내었으며, N의 함량이 높을수록 비정상 입자성장은 심하게 나타났다. 질소의 함량이 높은 Si-40N 조성의 소결 조제를 첨가한 알루미나는 bloating이 나타나며, 이것은 액상에 녹지 않는 과잉의 질소가 방출되기 때문이다.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.225-228
• /
• 2009

The processing and characterization of ceramic nanocomposites, which produce bulk nanostructures with attractive mechanical properties, have been emphasized and introduced at Prof. Mukherjee's Lab at UC Davis. The following subjects will be introduced in detail in Part II, III, and IV. In Part II, the paper will describe a three-phase alumina-based nanoceramic composite demonstrating superplasticity at a surprisingly lower temperature and higher strain rate. The next part will show that an alumina-carbon nanotube-niobium nanocomposite produced fracture toughness values that are three times higher than that of pure nanocrystalline alumina. It was possible to take advantage of both fiber-toughening and ductile-metal toughening in this investigation. In the fourth section, discussed will be a silicon-nitride/silicon-carbide nanocomposite, produced by pyrolysis of liquid polymer precursors, demonstrating one of the lowest creep rates reported so far in ceramics at the comparable temperature of $1400^{\circ}C$. This was first achieved by avoiding the oxynitride glass phase at the intergrain boundaries. One important factor in the processing of these nanocomposites was the use of the electrical field assisted sintering method. This allowed the sintering to be completed at significantly lower temperatures and during much shorter times. These improvements in mechanical properties will be discussed in the context of the results from the microstructural investigations.