• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.494-503
• /
• 2003

The IEEE 1394 High Speed Serial Bus is a versatile, high-performance, and low-cost method of promoting interoperability between all types of A/V and computing devices. IEEE 1394 provides two transfer modes: asynchronous mode for best effort service and isochronous mode for best effort service with bandwidth reservation. This paper shows the bus performance and compared the transfer odes first at the link level and then at the application level. For the application level performance, we analyze the bus systems with fixed and adaptive interfaces, applied between the upper layer and the 1394 layer, using polling systems. Also we verifies the analysis models with simulation studies. Based on our analysis, we conclude that the adaptive interface reduces the bus access time and so increases the bus utilization.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.328-332
• /
• 2019

Advances in web technology have enabled technical convergence in various system environments to be carried out through the web interface. The Web can be categorized from the Web 1.0 to the 4.0, depending on its role, it has the characteristics of connects information, connects people, connects knowledge, and connects intelligence. In addition, various technological needs occurred through the mobile app during the 4th Industrial Revolution, and functions such as 3D, virtual reality, augmented reality, video/audio processing were enabled on the web, which was a simple means of providing information. Technical standards have been studied to support these period needs. In this paper, I would like to mention one of the Web assembly. We will explore ways to link and fuse Web assembly with existing web systems (or platforms) and analyze their technical implications through a variety of examples. In addition, we will conduct a study on the architecture that can fuse the existing javascript with the web assembly, and discuss the future direction of the study.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.67-73
• /
• 2018

There are many types of power facilities such as transformers, switches, and energy storage devices in the micro grid environment. However, with the development of IoT technology, opportunities to acquire sensor information such as temperature, pressure, and humidity are provided. In the existing micro grid environment, the communication protocols such as MMS transport protocol in IEC 61850 standard is applied in accordance with the integrated operation between the power facilities and the platform. Therefore, to accommodate IoT data, a gateway technology that can link IoT data to a data collection device (FEP) based on IEC 61850 is required. In this paper, we propose IEC 61850 based IoT gateway platform prototype for microgrid operating system linkage. The gateway platform consists of an IoT protocol interface module (MQTT, CoAP, AMQP) and database, IEC 61850 server. For databases, We used open source based NoSQL databases, Hbase and MongoDB, to store JSON data. We verified the interoperability between the IoT protocol and the IEC 61850 protocol using Sisco's MMS EASY Lite.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1223-1230
• /
• 2021

Recently, energy resource management is a major concern around the world. Energy management activities minimize environmental impacts of the energy production. This paper presents design and prototyping of a home electric energy monitoring system that provides residential consumers with real time information about their electricity use. The developed system is composed of an in-house sensing system and a server system. The in-home sensing system is a set of wireless smart plug which have an AC power socket, a relay to switch the socket ON/OFF, a CT sensor to sense current of load appliance and a Kmote. The Kmote is a wireless communication interface based on TinyOS. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to residential consumers. We analyzed and presented energy consumption data from electrical appliances for 3 months in home. The experimental results show the promising possibilities to estimate the energy consumption patterns and the current status.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.199-204
• /
• 2023

The COVID-19 pandemic, which began in early 2020, became an opportunity for unprecedented global reflection and change. And it served as an opportunity to promote a new paradigm in all areas of society, including politics, economy, culture, and industry. In the midst of this upheaval, the 2022 IAA exhibition, which was held in four years, was held as an exhibition that even proposed new concepts of smart logistics and mobility services. Among them, various concepts were also proposed in exhibitions related to last mile mobility, the focus of this study.As a result of this study, the main trend of last mile mobility shown in the IAA 2022 exhibition is that the property of physical products with functions as social interfaces is expanding into the PSS (Product-Service System) ecosystem in which products and services are systematically linked. As a result, the need for a methodological approach that can organically link the design planning of social services and the development of products corresponding to it was derived.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.207-214
• /
• 2009

Purpose: In arthroscopic rotator cuff repairs there are generally weak link in tendon suture interface, arthroscopic rotator cuff repairs can have higher retear rates than open repairs. The purpose of this study was to compare the strength of UU (Ulsan University) suture than open modified MA (Mason-Allen) suture when suture anchored into bone. Materials and Methods: The human supraspinatus tendons were harvested from the shoulder of the cadaver and split in 2 times, producing four tendons per one shoulder, for a total of 24 specimens. Two suture configurations (UU, MA) were randomized and checked on each set of tendons. Specimens were cyclically loaded under force control between 5 and 30 N at 0.25 Hz for fifty cycles. Each specimen was loaded to failure under displacement control at 1 mm/sec. Cyclic elongation, peak to peak displacement, stiffness, ultimate tensile load, mode of failure were checked. Results: No significant difference was found between two suture configuration with respect to peak to peak displacement, cyclic elongation, and stiffness. With regard to ultimate failure load, there were no significant difference statistically between the UU suture and modified MA suture (109.4 N, 110.6 N). The most common mode of failure between both sutures was suture pull-out through the tendon. Conclusion: The UU suture and modified MA suture produced similar biomechanical properties.

• Korean Journal of Cognitive Science
• /
• v.12 no.3
• /
• pp.29-46
• /
• 2001

This study attempted to demonstrate that the integration of the two premises in linear syllogism is mediated by the middle term the term that is repeated in the two premises. In Experiment 1. we examined whether representing the middle term is more important than representing the end terms. We asked a question to each premise. Depending on the order of the questions either the two end terms or the middle term became the answer in both premises. Participants solved the problems better when the middle term became the answer suggesting that it is more important to represent the middle term than the end terms. In Experiment 2 we examined whether additional processing is needed for the integration beyond establishing co-referential link through the middle term. We pronominalized the middle term in the second premise and provided two kinds of information to disambiguate the pronoun. In the direct information condition we provided information about who the pronoun is whereas in the indirect information condition we provided information about the relative location of the pronoun. Participants solved the problems more quickly in the indirect information condition than in the direct information condition indicating that mere co-referential link was not enough and that the relative location of the middle term needs to be computed for the integration of the two premises.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1131-1144
• /
• 2004

In this paper, we investigate a problem with an e-learning system for e-business environments and introduce the solving method of the problem. To be more accurate, existing Web-hosted and ASP (Application Service Provider)-oriented service model is difficult to cooperate and integrate among the different kinds of systems. So we have produced sharable and reusable learning object, they have extracted a principle from pedagogical designs for units of reuse. We call LIO (Learning Item Object). This modeling makes use of a constructing for XML Web Services. So to speak, units of reuse from pedagogical designs are test tutorial, resource, case example, simulation, problem, test, discovery and discussion and then map introduction, fact, try, quiz, test, link-more, tell-more LIO learning object. These typed LIOs are stored in metadata along with the information for a content location. Each one of LIOs is designed with components and exposed in an interface for XML Web services. These services are module applications, which are used a standard SOAP (Simple Object Access Protocol) and locate any computer over Internet and publish, find and bind to services. This guarantees the interoperation and integration of the different kinds of systems. As a result, the problem of e-learning systems for e-business environments was resolved and then the power of understanding about learning objects based on pedagogical design was increased for learner and instruction designers. And organizations of education hope for particular decreased costs in constructing e-learning systems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.3
• /
• pp.81-90
• /
• 1999

The functional change of university forest have led to need more complicated techniques for forest management strategies, and more information about forest and natural environment. Therefore the systematic tools, like the so-called Forest Information System to which apply the techniques of geographic information system, are eagerly required for collecting, editing, managing, analyzing the various data about forest and environment, and for supporting the decision-making process. The digital mapping, which could be a primary step to construct the Forest Information System, was carried out using the many kinds of thematic spatial data referring to the Seongju Experimental Forest of Taegu University. As a result, various digital maps including forest type, soil type and so on were constructed. And then we made an user-interface system to link the attributive data in management plan to the thematic spatial data. This system was regarded as the effective tool capable of the more rapid query, analysis and update of related data for systematic management of university forest. Moreover, it would be a useful tool of decision-making in devising, assessing and operating the plan of forest management and development. But there would be much room for supplementation and improvement to make the more convenient and powerful system for the external demands, therefore more concerns and efforts in collecting, revising and updating the data is continuously required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.93-98
• /
• 2004

Serial ATA interface Is inexpensive comparatively and performance is superior. So it is suitable technology in demand that now require data transmission and throughput of high speed. This paper describes a design and implementation of Serial ATA Link layer about error detection and 8b/10b encoder/decoder for DC balance in frequency 150MHz. The 8b/10b Encoder is partitioned into a 5b/6b plus a 3b/4b coder. The logical model of the block is described by using Verilog HDL at register transistor level and the verified HDL is synthesized using standard cell libraries. And it is fabricated with $0.35{\mu}m$ Standard CMOS Cell library and the chip size is about $1500{\mu}m\;*\;1500{\mu}m$. The function of this chip has been verified and tested using testboard with FPGA equipment and IDEC ATS2 test equipment. It is used to frequency of 100MHz in verification processes and supply voltage 3.3V. The result of testing is well on the system clock 100MHz. The designed and verified each blocks may be used IP in the field of high speed serial data communication.