• Journal of Astronomy and Space Sciences
• /
• 제21권4호
• /
• pp.303-314
• /
• 2004

In this paper we report some properties of inner magnetospheric structure inferred from the T01_s code, one of the latest magnetospheric models by Tsyganenko. We have constructed three average storms representing moderate, strong, and severe intensity storms using 95 actual storms. The three storms are then modelled by the T01_s code to examine differences in magnetic structure among them. We find that the magnetic structure of intense storms is strikingly different from the normal structure. First, when the storm intensity is large, the field lines anchored at dayside longitudinal sectors become warped tailward to align to the solar wind direction. This is particularly so for the field lines anchored at the longitudinal sectors from postnoon through dusk. Also while for the moderate storm the equatorial magnetic field near geosynchronous altitude is found to be weakest near midnight sector, this depression region expands into even late afternoon sector during the severe storm. Accordingly the field line curvature radius at the equator in the premidnight geosynchronous region becomes unusually small, reaching down to a value less than 500 km. We attribute this strong depression and the dawn-dusk asymmetry to the combined effect from the enhanced tail current and the westward expansion/rotation of the partial ring current.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.191-196
• /
• 2010

The electricity distribution system in Korea is adopting a multi-grounding system. Protection of this distribution system against lightning is performed by installing overhead ground wires over the high voltage wires, and connecting the overhead ground wires to the ground every 200 m. The ground resistance in this system is limited not to exceed $50\Omega$ and overhead ground wire and neutral wire are multiple parallel lines. Although overhead ground wire and neutral wire are installed in different locations on the same pole, this circuit configuration has duplicated functions of providing a return path for unbalanced currents and protecting the distribution system against induced lightning. Therefore, the purpose of this study is to analyze the induced lightning shielding effect according to the neutral wire installation structure of a 22.9kV distribution line in order to present a new 22.9kV distribution line structure model and characteristics. This study calculated induced lightning voltage by performing numerical analysis when an overhead ground wire is present in the multi-grounding type 22.9kV distribution line structure, and calculated the induced lightning shielding effect based on this calculated induced lightning voltage. In addition, this study proposed and analyzed an improved distribution line model allowing the use of both overhead wire and neutral wire to be installed in the current distribution lines. The result of MATLAB simulation using the conditions applied by Yokoyama showed almost no difference between the induced lightning voltage developed in the current line and that developed in the proposed line. This signifies that shielding the induced lightning voltage through overhead wire makes no difference between current and proposed distribution line structures. That is, this study found that the ground resistance of the overhead wire had an effect on the induced lightning voltage, and that the induced lightning shielding effect of overhead wire is small.

• 자원환경지질
• /
• 제25권3호
• /
• pp.351-358
• /
• 1992

The gravity measurement has been conducted at 327 station with an interval of 25 m along the survey lines of 1.6 km and 1.7 km traversing Hyungsan river and of 2.35 km and 2.42 km running N-S direction near Heunghae-eup in Pohang basin. Bouguer gravity anomalies were obtained, and geologic structure along four survey lines were interpreted by applying Fourier series and Talwani methods for two demensional body. A fault is in existence along the Hyungsan river, and northern block of it is displaced down by 150 m to 200 m relative to southern one. The thicknesses of Yeonil Group vary from 250 m to 550 m and from 150 m to 300 m in the northern and southern blocks of the fault, respectively. Another fault is in existence running E-W direction near Heunghae-eup, and its southern block is displaced down by about 250 m relative to its northern block. The thicknesses of Yeonil Group vary from 200 m to 400 m and from 500 m to 700 m in the southern and northern blocks of the fault, respectively. Above two faults are normal faults and make a graben structure, which results the age of rocks in the central region between the faults is younger than those of outside regions. This result coincides with that of paleontological study.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.301-306
• /
• 2014

We proposed a new PCB-type 'common-mode current($I_c$) and differential-mode current($I_d$) detector' working for fast detection of $I_c$ and $I_d$ from the differential-mode signaling, with miniaturization effect and possibility of cheaper fabrication. In order to realize this device, we suggest a branch-line-coupler balun having a composite right- and left-handed(CRLH) one-layer microstrip phase-shifting line as compact as roughly ${\lambda}_g/14$. The presented balun obviously is different from the conventional bent-&-folded delay lines or slits on the ground for coupling the lines on the top and bottom dielectrics. As we connect the suggested balun output ports of the differential-mode signal lines via the through-port named U and coupled-port named L, $I_c$ and $I_d$ will appear at port ${\Delta}$ and port ${\Sigma}$ of the present device, in order. The validity of the design scheme is verified by the circuit-and numerical electromagnetic analyses, and the dispersion curve proving the metamaterial characteristics of the geometry. Besides, the examples of the $I_c$ and $I_d$ indicator are observed as the even and odd modes in differential-mode signal feeding. Also, the proposed device is shown to be very compact, compared with the conventional structure.

• 한국통신학회논문지
• /
• 제35권4A호
• /
• pp.408-416
• /
• 2010

플립 칩(Flip-Chip) 본딩을 적용하는 광 송신용 모듈에서 구동 IC(Driver IC)와 VCSEL(Vertical Cavity Surface Emitting Laser) 사이의 전송선에서 반사특성을 개선시키기 위한 덤벨 형태의 CPW 전송선 구조를 제안하였다. 제안된 구조는 반사특성을 개선시키기 위하여 기판 측면의 플립 칩 본딩 구조에 그라운드 더미 솔더 볼을 이용하여 CPW 전송선 구조를 유지하였고, 덤벨 형태의 CPW 전송선으로 설계하여 반사특성을 개선시켰다. 시뮬레이션 결과, 덤벨형태의 CPW 전송선의 반사 특성이 일반적인 CPW 전송선보다 13 dB 정도 우수한 것으로 나타났으며, CPW 전송선의 형태를 유지시키는 더미 그라운드 솔더 볼이 있을 때 4 dB 정도 반사특성이 개선되었다. 구동 IC 와 VCSEL의 임피던스 변화에 기인하는 전송선의 입출력 임피던스의 변화에 따른 반사특성의 변화율은 ${\pm}2.5\;dB$ 정도로 나타났다.

• Journal of Microbiology and Biotechnology
• /
• 제25권5호
• /
• pp.629-636
• /
• 2015

Chemical investigation of the actinobacterial isolate Pseudonocardia endophytica VUK-10 has led to the segregation of two known bioactive compounds, namely 4-(2-acetamidoethyl) phenyl acetate and 4-((1, 4-dioxooctahydropyrrolo [1, 2-a] pyrazin-3-yl) methyl) phenyl acetate. The strain was isolated from a sediment sample of the Nizampatnam mangrove ecosystem, south coastal Andhra Pradesh, India. The chemical structure of the active compounds was established on the basis of spectroscopic analysis, including ¹H NMR and ¹³C NMR spectroscopies, FTIR, and EIMS. The antimicrobial and cytotoxic activities of the bioactive compounds produced by the strain were tested against opportunistic and pathogenic bacteria and fungi and on MDA-MB-231, OAW, HeLa, and MCF-7 cell lines. The compounds exhibited antimicrobial activities against gram-positive and gram-negative bacteria and fungi and also showed potent cytotoxic activity against MDA-MB-231, OAW, HeLa, and MCF-7 cell lines. This is the first example for this class of bioactive compounds isolated from Pseudonocardia of mangrove origin.

• 대한산업공학회지
• /
• 제12권1호
• /
• pp.119-131
• /
• 1986

Described in this paper is a modelling methodology for mass production system simulation. The mass production system under consideration consists of various types of flow lines, special purpose production facilities, conveyor lines, palletized carts, and storage facilities. This type of production system is typical in home appliance industry, automobile industry, footwear industry, etc. where a variety of product mix are mass-produced. The modelling methodology is based on the "discrete-event formalism", and an "activity-oriented world view" is adopted to formalize the system description. A distinctive feature of the modelling methodology is that only the static structure (ie, system components) is included in the fixed model. The dynamic structure of the system is specified through a "data-driven" mechanism, which is an extension of the "experimental frame" concept. Each type of system components (ie, flow line, conveyors, carts, etc.) is formally modeled by using Activity Cycle Diagrams. The issue of "model structuring" is also addressed. The modeling methodology has been successfully applied in a real simulation study of a mass production system.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.241-246
• /
• 2008

Design of a high-speed railway line requires collaboration of heterogeneous application systems and of engineers with different background. Object-based 3D models with metadata can be a shared information model for the effective collaborative design. In this paper, railway infrastructure information model is proposed to enable integrated and inter-operable works throughout the life-cycle of the railway infrastructures, from planning to maintenance. In order to develop the model, object-based 3-D models were built for a 10km railway among Korea high-speed railway lines. The model has basically three information layers for designers, contractors and an owner, respectively. Prestressed concrete box-girders are the most common superstructure of bridges. The design information layer has metadata on requirements, design codes, geometry, analysis and so on. The construction layer has data on drawings, real data for material and products, schedules and so on. The maintenance layer for the owner has the final geometry, material data, products and their suppliers and so on. These information has its own data architecture which is derived from similar concept of product breakdown structure(PBS) and work breakdown structure(WBS). The constructed RIIM for the infrastructures of the high-speed railway was successfully applied to various areas such as design check, structural analysis, automated estimation, construction simulation, virtual viewing, and digital mock-up. The integrated information model can realize virtual construction system for railway lines and dramatically increase the productivity of the whole engineering process.

• Entomological Research
• /
• 제48권5호
• /
• pp.429-438
• /
• 2018

Fine structural characteristics of the cardiac muscle and its sarcomere organization in the black widow spider, Latrodectus mactans were examined using transmission electron microscopy. The arrangement of cardiac muscle fibers was quite similar to that of skeletal muscle fibers, but they branched off at the ends and formed multiple connections with adjacent cells. Each cell contained multiple myofibrils and an extensive dyadic sarcotubular system consisting of sarcoplasmic reticulum and T-tubules. Thin and thick myofilaments were highly organized in regular repetitive arrays and formed contractile sarcomeres. Each repeating band unit of the sarcomere had three apparent striations, but the H-zone and M-lines were not prominent. Myofilaments were arranged into distinct sarcomeres defined by adjacent Z-lines with relatively short lengths of $2.0{\mu}m$ to $3.3{\mu}m$. Cross sections of the A-band showed hexagon-like arrangement of thick filaments, but the orbit of thin filaments around each thick filament was different from that seen in other vertebrates. Although each thick filament was surrounded by 12 thin filaments, the filament ratio of thin and thick myofilaments varied from 3:1 to 5:1 because thin filaments were shared by adjacent thick filaments.

• 한국항행학회논문지
• /
• 제27권4호
• /
• pp.417-422
• /
• 2023

본 논문은 broadside 슬롯 결합선로를 이용하여 여러 구조의 3-dB 결합기를 구현하여 이것의 특성을 분석하였다. Tandem 구조의 이상적인 결합기는 첫 번째 와 두 번째 결합기의 연결부의 반사계수와 고립 계수가 모두 0임을 전제로 해석한다. 그러나 대부분의 결합기는 반사계수와 고립 계수가 0이 아니므로 이 경우에 결합기의 특성이 어떻게 변화 되는가를 S-파라미터 종속접속 계산 방법을 이용하여 확인하였다. 이와 같은 특성이 나오는 것을 확인하기 위하여 중심 주파수 2 GHz에서 broadside 슬롯 결합선로를 이용하여 1단 그리고 tandem 구조의 2단 그리고 3단으로 3-dB 결합기를 제작하였고, 제작된 결합기의 연결 부분의 반사 계수와 고립 계수가 0이 아님으로 인하여 측정된 결합기 특성이 열화되는 것을 확인하였다.