• Title/Summary/Keyword: lines of the structure

Search Result 1,158, Processing Time 0.027 seconds

The geomorphic characteristics of Bulguksa-region and the earthquake resistant structure of the Bulguksa-Temple

  • Hwang, Sang-Ill
    • The Korean Journal of Quaternary Research
    • /
    • v.22 no.2
    • /
    • pp.1-5
    • /
    • 2008
  • Some reverse fault lines pass through the alluvial fans and west hill slope of Bulguksa mountains including Mt. Toham in the directions of N-S and NW-SE. The study area is known as relatively unstable, because of active faults. Assuming the record of earthquake in the Samguksagi, the architects in the construction of the Bulguksa temple should have recognized the possibility of breakdown from the earthquakes and the need for an unique structure against at that time. Against earthquakes, Greavee technique, a stonework construction technique following woothe one and use of Chushouok (Dongtleouok or Chumchaouok) were applied for the construction of Bulguksa temple. By designing the foundation stone with hole, a structure is prevented from motiff Ction that pillarsakdcede from a foundation stone in spite of horizontal load of earthquake while woot construction isaktrong frame at earthquake. The Bulguksa-temple isausually evaluated to be a beautiful architecture from the appeaultces like the weight balltced structure with unique decoration. ampressive architectures are beautiful in balance and harmony coming from the important and specific rolls in its own way by each part of whole structure. This beauty comes from the science.

  • PDF

Spectral line Variations of the Symbiotic Variable CH Cygni

  • Yoo Kye Hwa;Kim Kang Min;Lee Byung Chul;Yoon Tae Seog;Lee Jung Ae;Kang Yong Hee
    • Journal of the Korean earth science society
    • /
    • v.26 no.2
    • /
    • pp.160-165
    • /
    • 2005
  • A series of high resolution spectra of CH Cygni obtained at the Bohyunsan Optical Astronomy Observatory (BOAO) in April 2004 has been analyzed. The emission components of the [O I] 6300 A lines are de-convoluted and fitted with Gaussian functions in order to investigate the characteristics and the structure of CH Cygni system along with the analysis for $H{\alpha}$ and [O III] lines. A present geometrical structure of the components of CH Cygni system is suggested.

CELLULAR/DCS/US-PCS Triple-Band Internal Antenna with a Novel Feeding Structure

  • Jung, Byung-Woon
    • Journal of information and communication convergence engineering
    • /
    • v.6 no.2
    • /
    • pp.172-176
    • /
    • 2008
  • This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

Spatial Structure of Hinterlands and Forelands of Pusan Container Export Port: the Cases of 3 National Flag Carriers (부산 컨테이너 수출항의 배후지와 지향지의 공간구조)

  • Cho, Su-Kyung
    • Journal of the Korean Geographical Society
    • /
    • v.28 no.3
    • /
    • pp.247-267
    • /
    • 1993
  • According to developing international economy since the World War II, the increase and competition of the national business is so empha-sized tht both the interest and the necessity about marine transportation playing the impor-thant role of international transportation are increased. Today, the container transportation, as called the innovation of marine transport has been prevailed since the 1970's. The purpose of this paper is to grasp the spatial structure of the hinterlands and forelands, its object is export container cargo at Pusan Export Port, as known for the transportation node of modern containerlization. In this study, for the purpose of grasping the relation between hinterlands and forelands of Korean export container cargo, first, I researched the transition of carloading about container cargo, the bistribution channel of cargo, the change of the items of container and the carlo-adings about transport route, secondly, I used the cluster analysis so as to group hinterlands according to the items of goods and forelands. The object of the analysis is container cargo of Choyang Line, Hanjin Shipping and Hyundai Merchant Marine of National Frag Carriers. The source materials used in this study are Trucking Data of Hanjin Co., Container Ren-tal Data of Samik Transport Co. and Transpor-ting Present Condition Tables of Hyundai Mer-chant Marine. 1. There are two kinds of the transport classi-fied by its form: FCL and LCL. In Pusan Con-tainer Export, a lot of textile goods, clothings and furniture, compound, electric goods, and so on are dealed with but the rate of occupation of the transport is getting lower while that of occupation of equipment, papers and agricultu-ral, mineral and livestock industry higher. 2. In 1990, the transports of container cargo in Korea consist of 7 services and round-the world lines. We can list North America lines, East-South Asian lines, Japan lines and Inter European lines, in order of the quantity of tran-sport form the largest to the smaller. We can have another list that Japan lines, North Ame-rica lines and East-South lines in order of the rate participation of national flag carriers, be-cacuse Korean foreign trade lay disproportionate emphasis on East-South Asian lines. Japan lines among them is the biggest import-export market. Since the rationlization policy of marine tran-sport in 1984, each of national flag carriers have its own lines. Hanjin Shipping predominates over North America lines, Choyang Line over New Zealand, Inter European and Austria lines and Hyundai Merchant Marine over Center-South America lines, in terms of the volume of transport. And small-to-medium sized shippers are prevailing in lines which are adjacent to Korea, Such as Japan lines and East-South Asian lines. 3. In relation to hinterlands and forelands of Choyang Line, the light industry goods, electric goods and machinary produced in Seoul and Pusan are exported to the major ports in Europe and Japan, the same produces in Suwon, Ulsan, Kumi are exported to European Ports, and those in Incheon and Kwangju Austrian and Japanese ports, and those in the rest regions to the major port in Japan. 4. In relation to hinterlands and forelands of Hanjin Shipping, the light industry goods pro-ducing in Seoul and Pusan, the electric goods and machinary in Incheon and Pyeongteck, are exported to New York and Los Angeles. Electric goods and machinary Masan, Anyang, Cheona, Cheongju and Incheon, Electric goods machinary and light industry goods in Kwangju and non mental goods in Pohang, are exported New York, Los Angeles and Oakland. 5. In relation to hinterlands and forelands of Hyundai Merchant Marine, the region of Seoul, Pusan and Incheon closely related with the main ports in U.S.A. The rest regions with Montreal. The hinterlands of export container cargo can be classified by its export items into three kinds: the large city, industrial city and the rest city. Choyang Line's forelands are European lines, Japan lines and Austria lines, and Hanjin Shipping's forelands are North America lines, and Hyundai Merchant Marine's forelands are North America lines and Japan line. 3 National flag carriers' major forelands are determined by the size of port and the shipper's convenient use of the port terminal.

  • PDF

Monitoring changes in the genetic structure of Brown Tsaiya duck selected for feeding efficiency by microsatellite markers

  • Yi-Ying Chang;Hsiu-Chou Liu;Chih-Feng Chen
    • Animal Bioscience
    • /
    • v.36 no.3
    • /
    • pp.417-428
    • /
    • 2023
  • Objective: Few studies have genetically monitored chickens over time, and no research has been conducted on ducks. To ensure the sustainable management of key duck breeds, we used microsatellite markers to monitor Brown Tsaiya ducks over time genetically. Methods: The second, fourth, sixth to eighth generations of the Brown Tsaiya duck selected for feeding efficiency and control lines were included in this study to investigate the genetic variations, effective population size, population structure and the differentiation between populations over time with 11 microsatellite markers derived from Brown Tsaiya duck. Results: The results showed there were a slight decrease in the genetic variations and an increase in within-population inbreeding coefficient (FIS) in both lines, but no consistent increase in FIS was observed in each line. The effective population size in the second and eighth generations was 27.2 for the selected line and 23.9 for the control line. The change in allele richness showed a downward trend over time, and the selected line was slightly lower than the control line in each generation. The number of private alleles (Np) in the selected line were higher than in the control line. Moderate differentiation was observed between the second and eighth generations in the selected line (FST = 0.0510) and the control line (FST = 0.0606). Overall, differentiation tended to increase with each generation, but genetic variation and structure did not change considerably after six generations in the two lines. Conclusion: This study provides a reference for poultry conservation and helps to implement cross-generation genetic monitoring and breeding plans in other duck breeds or lines to promote sustainable management.

Structural Characteristics of the Mongolian Costume called YosunOja - Focus on the Medieval Finds from the Tomb Minshui, Neimenggu - (몽골 요선오자의 구조적 특징 - 내몽골 명수묘 출토 요선오자를 중심으로 -)

  • Kim Moon-Sook
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.6 no.3
    • /
    • pp.9-18
    • /
    • 2004
  • This study focuses on the medieval Mongol costume called YosunOja. This dress consists of a blouse and a skirt, and some lines on the waist part. The purpose of the study is to analyse the structural characteristics of this costume, especially on the medieval remains from the tomb Mingshui in the district of Neimenggu. It can be analysed that this costume has three structural characteristics, which are the functional structure, sumptuous one, and the idea of Buddhism. The functional structure consists of the style with a blouse and a skirt, which gives enough surplus for the movement, the back-slash for the ease of the riding, and the dart in the front line which eliminates unnecessary surplus. The sumptuous structure is the many lines of the waist which show the maximization of the decoration, the extraordinary long sleeves, and the use of the expensive gold brocade which shows the wealth of the dresser. And also, the cutting of the fabric into the numerous segment may mean the medieval Mongols believed in Buddhism.

  • PDF

Numerical simulation of 2-D fluid-structure interaction with a tightly coupled solver and establishment of the mooring model

  • Tsai, I-Chen;Li, Sing-Ya;Hsiao, Shih-Chun;Hsiao, Yu
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.13 no.1
    • /
    • pp.433-449
    • /
    • 2021
  • In this study, a newly enhanced Fluid-Structure Interaction (FSI) model which incorporates mooring lines was used to simulate a floating structure. The model has two parts: a Computational Fluid Dynamics (CFD) model and a mooring model. The open-source CFD OpenFOAM® v1712 toolbox was used in the present study, and the convergence criteria and relaxation method were added to the computational procedure used for the OpenFOAM multiphase flow solver, interDyMFoam. A newly enhanced, tightly coupled solver, CoupledinterDyMFoam, was used to decrease the artificial added mass effect, and the results were validated through a series of benchmark cases. The mooring model, based on the finite element method, was established in MATLAB® and was validated against a benchmark analytical elastic catenary solution and numerical results. Finally, a model which simulates a floating structure with mooring lines was successfully constructed by connecting the mooring model to CoupledinterDyMFoam.

Study on the Establishment of Rail Grinding Criteria of High-Speed Railway Lines Considering the KTX Operation Circumstances (KTX 운행현황을 고려한 고속선 레일 연마 기준 정립에 대한 연구)

  • Kim, Man-Cheol;Kang, Tae-Ku
    • Proceedings of the KSR Conference
    • /
    • 2007.11a
    • /
    • pp.377-385
    • /
    • 2007
  • The importance of maintenance of rail surface defects is increasing more according to the KTX operation. That is because during high speed operation of rolling stock, rail surface defects may cause shortened fatigue life of rail, acceleration of track degradation and reduced ride comfort. The paper was intended to study the establishment of rail grinding criteria of high-speed railway lines considering the KTX operation circumstances. For this, the specimens of UIC 60 rail on Kyeong-Bu high-speed operation lines were collected and they were analyzed for metallographic structure and tested for the hardness. By analyzing the test results to the factors affecting the RCF causing the defects of rail surface, the study suggested the rail grinding criteria of the domestic high speed railway lines. As the factors affecting RCF, passing tonnage, running speed and track condition are considered.

  • PDF

Drawing of penetrating lines using personal computer (個人용 컴퓨터를 利용한 相貫線의 圖示)

  • 채희창
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.12 no.1
    • /
    • pp.173-182
    • /
    • 1988
  • A program for drawing of penetrating lines was developed in personal computer. PROLOG, a language of Artificial Intelligence, was used and a data structure using relational data base was designed. An algorithm for finding the penetrating lines in the real space was developed. The program can be applied at any types of penetrating problems like curve-surface, surface-surface, curve-object, surface-object, object-object, etc. In developing the program, the following results were obtained. (1) Relational data base built in PROLOG and the function of backtracking are helpful in Computer Graphics. (2) In spite of increasing the number of edges, assigning direction to the edges makes it possible to represent the polygon meshes as the non ordered sets of directional half edges. (3) Topologicaly the penetrating lines of a polygon can be represented as the edge-pairs in the edge list of the polygon,

Coupling Performance Analysis of a Buried Meshed-Ground in a Multi-layered Structure

  • Joung, Myoung-Sub;Park, Jun-Seok;Kim, Hyeong-Seok;Lim, Jae-Bong;Cho, Hong-Goo
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • v.4C no.6
    • /
    • pp.282-287
    • /
    • 2004
  • Since the manufacturing process in the LTCC process does not allow solid ground planes between ceramic layers to isolate the signal lines, the buried ground should be realized as a meshed ground plane. Both characteristic impedances of the signal lines and couplings between different signal layers are influenced by the properties of these meshed planes. In this paper, we propose a new analysis method for coupling behavior between internal transmission lines, which are isolated by the buried meshed-ground planes. The coupling behavior between layers isolated by meshed-ground planes is investigated by the coupled-transmission line model for the isolated layers. The coupling factors between isolated lines with the meshed-ground are extracted by 2-D FEM calculations.