• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.162-167
• /
• 2018

The effect of the average particle size and shape of silver nanoparticles for the transparent conductive film (TCF) was studied. Optical and electrical properties of silver conductive lines coated on the polyethylene terephthalate (PET) film was also measured. Silver nanoparticles produced by Ag-CM, Ag-ME, Ag-EE methods showed an excellent conductivity compared to those produced by Ag-EB, Ag-CR and Ag-PL methods, but a little difference in the transparency. In the case of the former three silver nanoparticles, the average particle size was about 80 nm or less and the size was uniform. For the latter case, the severe agglomeration phenomena of particles was observed and the average particle size was 100 nm or more. This result was consistent with the result of the uniformity of the pattern shape and thickness on conductive line patterns observed by SEM. Therefore, it was confirmed that the electrical characteristics could be obtained when the average particle size of silver nanoparticles is smaller and the uniformity of the particles is maintained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.515-525
• /
• 1998

In this paper, for both transmission and reception with single antenna system of satellite communication, dual-frequency antennas which operate simultaneously at 12.5 GHz and at 14.25 GHz are designed, constructed and measured. Also by using dual feeding structure, the problems of single-fed dual-frequency antenna such as the separation of transmitting and receiving signals and single polarization, are solved. Microstrip patch as a radiation element of dual-fed dual-frequency antenna has width and length which are the resonance lengths of the corresponding frequencies for transmission and reception, respectively. The effects of the feed line on the other frequency feeding are minimized with the optimal matching scheme for the feed lines. For solving the space problems of dual-fed two-dimensional array antennas, microstrip-line and coaxial probe feedings are used for each frequency and a two-dimensional $2\times2$ array antenna was designed and measured their characteristics. The experimental results show that errors of resonance frequencies are less than 1.44%, the return losses are less than -21 dB and the isolations between two feeding ports are less than -21 dB. The characteristics of radiation patterns of dual frequency microstrip antenna are measured and evaluated. The directivities, sidelobe levels and cross polarizations are also measured and compared with the simulations. The results show some errors due to the misalignment of coaxial probe feeding.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.68-77
• /
• 2013

This report is based on the investigation of potholes which are formed by fluvial erosion. A pothole is called so because it is a hole that looks like a coffeepot. The results of previous studies are applied to the 'Jakgwaecheon Porthole' of this study. The study is focused on the dimension and morphology of the Pothole and investigates the effects of stream sediments, river flow, geological structural lines, etc. on the formation of potholes. As a result of measuring 61 potholes in this area, we recognized that the elliptical dish-shaped cross sections are dominant and inferred that their longitudinal direction on the plain is affected by the direction of the stream flow. Also, 'Jakgwaecheon Pothole' is very characterized in terms of scale and morphology. Furthermore, it is harmonious with the beautiful landscape, humanity, and historical values and it can be suggested that it is qualified to be registered as a geoheritage structure.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.93-100
• /
• 2012

Objective: This study is to review the current state of services offered to pharmacy users, and develop a service design converging a prescription service and a smart phone application service in order to enhance patients' experience at pharmacies and home. Background: Under the new medical system; separation of prescribing and dispensing drugs, a doctor writes a prescription to their patients and patients have their prescription filled at the pharmacy. As the number of flue, allergy and atopy patients has increased, waiting lines have been longer at pharmacies. Besides, the current medical service system lacks of providing proper information on prescribed pills to patients. There are already services offered during waiting times such as offering free drinks, magazines or suggesting general drugs which you can buy without prescription, however they neither cover the current medical service's shorts nor shorten the waiting time. Method: I researched objective and perceived waiting times reduction methods, the current service status at pharmacies, and the government's policy direction in a medical service. Also, I observed a patient's journey from the hospital to pharmacy and then home. I examined the circumstance at pharmacies, patients' behaviors and their thoughts during their journey, and extracted three main goals to design a service in order to help patients have positive perception during the waiting time; (1) to reduce the perceived time by the way of visualizing time and offering readings about what patients consider necessary, (2) to educate patients what they are into and how to get through, (3) to establish trust among patients, doctors and pharmacists. Based on three goals, I designed a structure and a wireframe for a new service application of smart phones. Results: With a new service design for pharmacy users, users can track their medical record and visit the information about their current medical treatments anytime. Also the service helps patients build reliable relationships with doctors and pharmacists. Conclusion: Experience is not just an activity but series of multiple activities. The serving range of a medical service should not be determined by stakeholders but user's holistic experience. By approaching a service design with a holistic vision, it can enrich not only a temporary experience but also a whole life well being. Application: Since there are already many service applications advising patients about their illness and finding right doctors, this service design is focused on the experience from getting a prescription till feeling better. The next move is to combine those two parts medical services and design an integrated service application. As a prescription is going to be coded in numbers, we might consider to design an un-attended pharmacy which can shorten huge amount of time for filling prescriptions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.61-68
• /
• 2024

The majority of high-speed railway bridges along the domestic Gyeongbu and Honam lines feature a PSC-box type structure with a span length ranging from 35 to 40m, which typically exhibits a first bending natural frequency of approximately 4 to 5Hz. When KTX high-speed trains transverse these bridges at speeds ranging from 290 to 310km/h, the vibration induced by the trains approaches the first bending natural frequency of the bridge. Furthermore, with the upcoming operation of a EMU-320 high-speed train and the anticipated increase in the speeds of these high-speed trains, there is a need to analyze the dynamic response of high-speed railway bridges. For this, based on measured responses from actual railway bridges, a numerical model was constructed using a numerical model updating technique. The dynamic response of the updated numerical model exhibited a strong agreement with the measured response from the actual railway bridges. Subsequently, this updated model was utilized to analyze the dynamic response characteristics of the bridges when KTX and EMU-320 trains operate at increased speeds. The maximum vertical displacement and acceleration at the mid-span of the bridges were also compared to those specified in the railway design standard with the increasing speed of KTX and EMU-320.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.49-55
• /
• 2009

This paper describes a three-dimensional ground penetrating radar (GPR) survey carried out around a levee of the Ara River in Saitama, Japan, where deformation of the ground was observed after heavy rainfall associated with the typhoon of September 2007. The high-density 3D GPR survey was conducted as a series of closely adjacent four directional sets of 2D surveys at an area surrounding vertical cracks on the paved road caused by deformations induced by heavy rain. The survey directions of the 2D surveys were 0, 90, 45, and -45 degrees with respect to the paved road and the intervals between lines were less than 0.5 m. The 3D subsurface structure was accurately imaged by the result of data processing using Kirchhoff-type 3D migration. As a result, locations and vertical continuities of the heavy rainfall induced cracks in the paved road were clearly imaged. This will be a great help in considering the generation mechanisms of the cracks. Moreover, the current risk of a secondary disaster was found to be low, as no air-filled cavities were detected by the 3D GPR survey.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.218-231
• /
• 2012

A total of 126 fossil scaphopods (121 specimens from the Hagjeon Formation and 5 specimens from the Duho Formation) were found from the Cenozoic strata, Hagjeon and Duho Formations, Pohang Basin, Korea. Five species belonging two genera (Fissidentalium yokoyamai, F. sp. A, B, and Rhabdus sp. A, B) were classified: the most dominant species is Fissidentalium yokoyamai. The species of Fissidentalium yokoyamai is characterized by curved shell (accuration=3.90%) and very closely spaced longitudinal ribs on shell surfaces, while the species of Rhabdus is a nearly straight shell characterized by concentric growth lines without longitudinal ribs. Identification of two genera is somewhat easy due to such morphological differences but classification at generic level is hard because diagnostic features (e.g., cross section and apical structure) are lost in the most specimens. Consequently, except for Fissidentalium yokoyamai, the rest were classified temporarily as F. sp. A, B, and Rhabdus sp. A, B. Two types of preservation state were recognized: one is three-dimensionally preserved specimen (3D specimen) and the other is compressed specimen. Internal parts of the 3D specimen is filled with clastic sediments identical to the surrounding sediments of the shells, which is not observed in the compressed specimens. It is, thus, concluded that the 3D fossils were originally empty but internal cavity were immediately filled with the sediments, which may have protect from the compaction due to pressure during deposition of the gravelly to coarse sandstone of the Hagjeon Formation.

• Journal of Korean Elementary Science Education
• /
• v.41 no.1
• /
• pp.106-117
• /
• 2022

This study analyzes the characteristics of the "Conclusions" section of a thesis in elementary science education and presents a conclusion model that can be used in elementary science education. In the "Elementary Science Education" journal published by the Elementary Science Education Association, the conclusion section was analyzed on the four-year academic papers published. First, the title of the concluding chapter and the number of conclusions frequently used in elementary science education were identified. Results showed that most commonly used title for the conclusion section was "Conclusion and Suggestion," and the length of the section was 85.4 lines or 2.1 pages.. Then, as a result of analyzing the conclusions of elementary science journals in sentence units, we found stages as a kind of semantic unit frequently used in elementary science education papers. Further, we obtained that these stages are often used in connection with specific stages. Finally, a conclusion template for papers commonly used in elementary science education was presented. The results of this study can be used as basic data when drafting elementary science education papers. Furthermore, specific thesis regarding education plans and educational materials might be prepared for elementary science education graduate students based on the present results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.655-666
• /
• 2014

Recently, as the appearance and exterior design of the construction structure are highlighted, the irregularly shaped structures are increasing in a construction facility. Many softwares provide a quantity take-off function of 3D object under BIM environment, however, they are focused on the limited function based on the solid modeling method. Because the vast geometric information of the curved surface is difficult to extract in the 3D objects that consist of major changes in vertical section shape as the irregularly shaped structures, it is difficult to express a 3D object as a solid model. On the other hand, the irregularly shaped structures can be expressed in relatively free in the surface model because the surface model consists of points, lines and surfaces. Accordingly, the surface modeling method is suitable for the modeling of large irregularly shaped structures. This study suggests a quantity take-off algorithm for the irregularly shaped structures using the surface modeling approach that is beneficial in the design work of structures. Some case projects are used for verifying the accuracy of the proposed method.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.82.2-82.2
• /
• 2013

The NISS (Near-infrared Imaging Spectrometer for Star formation history) onboard NEXTSat-1 is being developed by KASI. The NISS will perform the imaging low-resolution spectroscopic observation in the near-infrared range for nearby galaxies, low background regions, starforming regions and so on. The off-axis reflecting telescope with a wide field of view (2 deg. ${\times}$ 2 deg.) will be operated in the wavelength range from 0.95 to $3.8{\mu}m$. In order to reduce thermal noise, a telescope and a HgCdTe infrared sensor will be cooled down to 200K and 80K, respectively. To evade a stray light outside a field of view and use limited space efficiently, the NISS adopted the off-axis reflective optical system. The primary and secondary mirrors, optomechanical part and mechanical structure were designed to use the same material. It will lessen the degradation of optical performance due to a thermal variation. The purpose of NISS is the observation of cosmic near-infrared background in the wide wavelength range as well as the detection of near-infrared spectral lines in nearby galaxies, cluster of galaxies and star forming regions. It will give us less biased information on the star formation history. In addition, we will demonstrate the space technologies related to the development of the Korea's leading near-infrared instrument for the future large infrared telescope, SPICA.