• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.65-70
• /
• 1989

An analytical study was conducted using the Galerkin technique to determine behaviour of thin fibrereinforced and laminated composite pipes under soil pressure. Geometric nonlinearity and material linearity have been assumed. It is assumed that vertical and lateral soil pressure are proportional to the depth and lateral displacement of the pipe respectively. It is also assumed that radial shear stress is negligible because the ratio of thickness to the radius of pipe is very small. The above results are verified by the finite element analysis.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.429-434
• /
• 2013

This study was designed to investigate the formation of ethyl carbamate (EC) during the ripening of Maesil with sugar and Soju (19.5~35% alcohol contents) using a homemade method. Maesil, sugar and Soju were purchased at ordinary market in June of 2012. The preparation of sample for analysis was conducted by method of Henry et al. The analysis of GC/MS was used SIM mode (m/z 89, 74, 62). Quantification was performed in terms of the 62 ion and was based on an internal standard procedure. Good linearity was obtained with a regression coefficient ($r^2$ = 0.993). Low detection limits (LOD) was achieved 4.31 ug/kg and recovery for alcohol was 74.8%. During 90 days, fermentation with sugar was not detected EC (under LOQ). 15 days ripened Maesil wine contained EC between non detected~32.7 ug/kg and 90 days ripened Maesil wine was 19.7~87.4 ug/kg. Higher proportion of Maesil and Soju increased EC contents. EC levels were increased 32.7 ug/kg to 87.4 ug/kg in the ratio of Maesil to 35% alcohol-Soju (1:1). In the ratio of Maesil to 35% alcohol-Soju (1:3) was increased non detected to 69.7 ug/kg. After 90 days, Maesil wine was filtered Maesil through a seive and ripened by 180 days to investigate the formation of EC compared with non filtered. Treatment of filtered, EC contents was much higher level compared with non filtered. Therefore, this result showed that alcohol contents contribute to increase EC formation more than Maesil.

• Journal of Acupuncture Research
• /
• v.32 no.2
• /
• pp.1-9
• /
• 2015

Objectives : The present study was an evaluation and standardization of herbal components in order to establish the efficacy and safety of Shinbaro pharmacopuncture. Methods : Among the raw materials of Shinbaro pharmacopuncture, the components Cibotii Rhizoma, Eucommiae Cortex, and Ledebouriellae Radix were assessed through ingredient verification experiments using thin-layer chromatography(TLC) and ultraviolet rays(UV) lamps. In addition, we standardized Acanthopanacis Cortex and Achyranthis Radix through validation using high performance liquid chromatograph-diode array detector(HPLC-DAD). Results : As result appeared a blue-white fluorescence under ultraviolet rays; changed to dark green after adding 1 % ferric chloride solution(due to Cibotii Rhizoma), and presented a yellow-green fluorescence when mixed with an ethyl ether under UV lamps by way of the ethyl ether layer, confirming Eucommiae Cortex. Ledebouriellae Radix was confirmed as dark brown spots at Rf values of 0.56 and 0.71 using TLC. Additionally, Acanthopanacis Cortex and Achyranthis Radix HPLC test results showed that linearity was $R^2{\geq}0.99$, and detection limit and quantitation limit were 0.23 to $1.29{\mu}g/mL$, and 0.71 to $3.90{\mu}g/mL$, respectively. Furthermore, precision and accuracy were confirmed to have relative standard deviation(RSD) values of 0.10 to 1.89 % and 96.19 to 103.72 %, respectively. Shinbaro pharmacopuncture did not have any overlapping or interference from other peaks in detection under the abovementioned analysis conditions. Conclusions : In conclusion, we confirmed that maintenance of Shinbaro pharmacopuncture validity was possible by means of quality control of Cibotii Rhizoma, Eucommiae Cortex, and Ledebouriellae Radix through ingredient identification and Acanthopanacis Cortex and Achyranthis Radix through high performance liquid chromatograph(HPLC) analysis. Further, we hope to contribute to the development strategy of herbal industry acupuncture.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.5
• /
• pp.61-67
• /
• 2010

In this study, Solid-phase microextraction (SPME) with GC/FID was studied as a possible alternative to liquid-liquid extraction for the analysis of chlorinated solvents (PCE and TCE) and these by-products (cis-DCE, VC, and Ethylene). Experimental parameters affecting the SPME process (such as kind of fibers, adsorption time, desorption time, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. Experimental parameters such as CAR/PDMS, adsorption time of 20 min, desorption time of 5 min at $250^{\circ}C$, headspace volume of 50mL, sodium chloride (NaCl) concentration of 25% combined with magnetic stirring were selected in optimal experimental conditions for analysis of chlorinated solvents and these by-products. The general affinity of analytes to CAR/PDMS fiber was high in the order PCE>TCE>cis-DCE>VC>Ethylene. The linearity of $R^2$ for chlorinated solvents and these by-products was from 0.912 to 0.999 when analyte concentrations range from $10{\mu}g/L$ to $500{\mu}g/L$, respectively. The relative standard deviation (% RSD) were from 2.1% to 3.6% for concentration of $500{\mu}g/L$ (n=5), respectively. Finally, the limited of detection (LOD) observed in our study for chlorinated solvents and these by-products were from $0.5{\mu}g/L$ to $10{\mu}g/L$, respectively.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.91-96
• /
• 2007

To improve the land use of urban, Construction of the circular steel column is required recently. The circular steel columns have a advantage for improving a load carrying capacity as wall as reducing a effective section area. However, the circular steel columns under service load, such as earthquake, shows a tendency to cause local buckling and large deformation. To prevent these phenomena, use of diaphragm is considered. It is reported that longitudinal stiffeners has a effect on improving a buckling and fatigue performance of steel structures. The research of effect on diaphragm is not sufficient. Under monotonic and cyclic loadings diaphragm make a important role to prevent local buckling and deformation of used steel structures. Therefore, influence of diaphragm on performance of used steel structures is investigated. In this study, the influence of diaphragm on seismic and deformation performance of circular steel piers was investigated by using elastic-plastic finite element analysis considered geometrical and material non-linearity. The seismic performance of circular steel columns was evaluated for analytical parameter of manufactured part. The seismic performance of circular steel columns was clarified by comparing an energy dissipation of circular steel piers.

• YAKHAK HOEJI
• /
• v.57 no.4
• /
• pp.293-298
• /
• 2013

Hwangryunhaedok-tang (HRT) is a traditional herbal medicine, which has been known as a useful prescription for anti-biotic, anti-inflammatory, anti-oxidative and immunosuppressive activity. In this study, the variation in the amount of eight bioactive components of Hwangryunhaedok-tang (HRT) and its fermentation HRT with Lactobacillus casei KFRI 127, Lactobacillus curvatus KFRI 166 and Lactobacillus confuses KFRI 227 was investigated via high-performance liquid chromatography coupled with diode array detection (HPLC-DAD). Simultaneous qualitative and quantitative analysis of eight bioactive components; geniposide, genipin, baicalin, wogonoside, palmatine, berberine, baicalein and wogonin was achieved by comparing their retention times ($t_R$) and UV spectra with those of the standard components. All calibration curve of standard components showed good linearity ($r^2$ >0.979). As a result, the geniposide amount was $15.52{\pm}0.19{\mu}/mg$ that as a main components in HRT. The wogonoside was decreased by 29.28~58.35% with Lactobacillus casei KFRI 127 and L. confuses KFRI 227 ($3.17{\pm}0.31{\mu}g/mg$ and $3.55{\pm}0.13{\mu}g/mg$) compared with the original HRT ($5.02{\pm}0.14{\mu}g/mg$). Otherwise wogonin was increased by 16.28~41.86% with Lactobacillus casei KFRI 127 and L. confuses KFRI 227 ($0.61{\pm}0.01{\mu}g/mg$ and $0.50{\pm}0.02{\mu}g/mg$) compared with the original HRT($0.43{\pm}0.00{\mu}g/mg$). HRT fermented with L. casei KFRI 127 and L. confuses KFRI 227 were evaluated as creating the changes in wogonoside to that aglycon wogonine. In the fermented HRT using Lactobacillus acidophilus KFRI 166, the genipin was only detected, among 3 species of fermentation strains. Thus, these results considered that the strains 166 were exhibited the remarkable changes in genipin.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.244-252
• /
• 2010

The objective of this study is to assess feasibility of simultaneous analysis for trace multi-components odorous and volatile organic compounds using a Triple-bed adsorbent tube with a thermal desorber and GC-MS. Triple-bed adsorbent tube is 3 bed packed Tenax-TA with small amount of Carbopack B and Carbosieve SIII in order of adsorption strength in a tube. The operating conditions of GC-MS was possibly able to and effectively detect high volatile and low molecular weight compounds at the mass range of 20~350 m/z using a below impurity 1ppm of Helium carrier gas, of which quantitatively analyzed by target ion extracts. According to the experiment, $C_1{\sim}C_5$ of 14 components; sulfur containing compounds(2), ketones(2), alcohols(4) and aldehydes(6) were simultaneously analyzed with recoveries of 99%, and good repeatability and linearity. High volatile and low molecular weight compounds such as methyl alcohol and acetaldehyde can be safely quantified with high recovery at a condition of 50mL/min of flow rate, below 2L of adsorption volume, and 45% of relative humidity. Target ion extract can also simultaneously quantify multicomponents with odorous and volatile organic compounds in an occasion of piled up two peaks.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.531-536
• /
• 2004

In fracture treatment with external fixators, the inter-fragmentary movements at the fracture site affect the fracture healing process, and these movements are highly related to the stiffness of external fixation systems. Therefore, in order to provide the optimal fracture healing at the fracture site, it is essential to understand the relationship between the stiffness and the system configurations in external fixation system. In this study we investigated the influences of system configuration parameters on the stiffness in the finite element analysis of an external fixation system of a long bone. The system alignment, the geometric and the material non-linearity of the pin, the joint stiffness and the callus formation were considered in the finite element model. In the first, the system stiffness of the developed finite element model was compared with the experiment data for model validation. The consideration of the joint stiffness and nonlinearity of the model improved the system stiffness results. The joint stiffness, the non-alignment of the system decreased the system stiffness while the callus formation increased the system stiffness. The present results provided the biomechanical basis of rational guidelines for design improvements of external fixators and pre-op. planning to maximize the system stiffness in fracture surgery.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.639-647
• /
• 2011

In this paper, we introduce a design methodology of data-centroid Radial Basis Function neural networks with extended polynomial function. The two underlying design mechanisms of such networks involve K-means clustering method and Particle Swarm Optimization(PSO). The proposed algorithm is based on K-means clustering method for efficient processing of data and the optimization of model was carried out using PSO. In this paper, as the connection weight of RBF neural networks, we are able to use four types of polynomials such as simplified, linear, quadratic, and modified quadratic. Using K-means clustering, the center values of Gaussian function as activation function are selected. And the PSO-based RBF neural networks results in a structurally optimized structure and comes with a higher level of flexibility than the one encountered in the conventional RBF neural networks. The PSO-based design procedure being applied at each node of RBF neural networks leads to the selection of preferred parameters with specific local characteristics (such as the number of input variables, a specific set of input variables, and the distribution constant value in activation function) available within the RBF neural networks. To evaluate the performance of the proposed data-centroid RBF neural network with extended polynomial function, the model is experimented with using the nonlinear process data(2-Dimensional synthetic data and Mackey-Glass time series process data) and the Machine Learning dataset(NOx emission process data in gas turbine plant, Automobile Miles per Gallon(MPG) data, and Boston housing data). For the characteristic analysis of the given entire dataset with non-linearity as well as the efficient construction and evaluation of the dynamic network model, the partition of the given entire dataset distinguishes between two cases of Division I(training dataset and testing dataset) and Division II(training dataset, validation dataset, and testing dataset). A comparative analysis shows that the proposed RBF neural networks produces model with higher accuracy as well as more superb predictive capability than other intelligent models presented previously.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.387-395
• /
• 2014

A highly sensitive analytical method based on stir bar sorptive extraction (SBSE) technique and gas chromatography/tandem mass spectrometry (GC-MS/MS) has been developed, allowing the simultaneous multi-analyte determination of 11 synthetic fragrances (SFs) in water samples. The stir bar coated with polydimethylsiloxane (PDMS) was added to 40 mL of water sample at pH 3 and stirred at 1,100 rpm for 120 min. Other SBSE parameters (salt effect and presence of organic solvent) were optimised. The method shows good linearity (coefficients > 0.990) and reproducibility (RSD < 10.9%). The extraction efficiencies were above 83% for all the compounds. The limits of detections (LOD) and limits of quantification (LOQ) were 2.1~4.1 ng/L and 6.6~12.9 ng/L, respectively. The developed method offers the ability to detect 11 SFs at ultra-low concentration levels with only 40 mL of sample volume. Matrix effects in tap water, river water, wastewater treatment plant (WWTP) final effluent water and seawater were investigated and it was shown that the method is suitable for the analysis of trace level of 11 SFs. The method developed in the present study has the advantage of being rapid, simple, high-sensitive and both user and environmentally friendly.