• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.97-103
• /
• 2018

In satellite communication, modulated beacon signal is spreaded by gold sequence and the modulated beacon is transmitted via linear phase modulation. Due to the difference in characteristics of the satellite and the receiver on the ground, frequency offset (FO) occurs. An existing modulated beacon receiver is a method of synchronizing the frequency of a modulated beacon signal using FFT(Fast Fourier Transform), which not only increases the delay and complexity in terms of system implementation but also has a separate circuit for compensating the phase difference due to FO and phase offset from FFT points. In order to overcome this problem, this paper proposes and analyzes a scheme for compensating and demodulating the coarse FO and phase offset at one time using the 2-phase shaped characteristics of the modulated beacon signal. Also, through the simulation, the modulation index suitable for the proposed method is analyzed and the appropriate cumulative number is also analyzed.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.679-688
• /
• 2011

A new discrete-amplitude pulse width modulation (DAPWM) scheme for a high-efficiency linear power amplifier is proposed. A radio frequency (RF) input signal is divided into an envelope and a phase modulated carrier. The low-frequency envelope is modulated so that it can be represented by a pulse whose area is proportional to its amplitude. The modulated pulse has at least two different pulse amplitude levels in order that the duty ratios of the pulse are kept large for small input. Then, an RF pulse train is generated by mixing the modulated envelope with the phase modulated carrier. The RF pulse train is amplified by a switching-mode power amplifier, and the original RF input signal is restored by a band pass filter. Because duty ratios of the RF pulse train are kept large in spite of a small input envelope, the DAPWM technique can reduce loss from harmonic components. Furthermore, it reduces filtering efforts required to suppress harmonic components. Simulations show that the overall efficiency of the pulsed power amplifier with DAPWM is about 60.3% for a mobile WiMax signal. This is approximately a 73% increase compared to a pulsed power amplifier with PWM.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.162-165
• /
• 2013

Recently, a new method called the local polynomial periodogram-Hough transform (LHT) was proposed for linear frequency modulated (LFM) signal detection. In this letter, a closed-form expression of the output signal-to-noise ratio is derived for the LHT, showing that the method exhibits a threshold effect for LFM signal detection. Comparisons with the pseudo-Wigner-Hough transform (PWHT) show that the threshold of the LHT is lower (better) than that of the PWHT.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.58-66
• /
• 2001

In this paper, a computationally efficient time delay and doppler estimation algorithm is proposed for active sonar with Linear Frequency Modulated (LFM) signal. To reduce the computational burden of the conventional estimation algorithm, an algebraic equation is used which represents the relationship between the time delay and doppler in cross-ambiguity function of the LFM signal. The algebraic equation is derived based on the Fast maximum Likelihood (FML) method. Using this algebraic relation, the time delay and doppler are estimated with two 1-D search instead of the conventional 2-D search. The estimation errors of the proposed algorithm are analyzed for various SNR's. The simulation result demonstrates the good performance of the proposed algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.255-261
• /
• 2014

This paper presents an underwater acoustic communication with nonlinear chirp modulation. The information is carried by the carrier amplitude, frequency or phase in the most common underwater acoustic communications. However, the proposed method includes the information within frequency variation of carrier wave for a symbol. Especially, as carrier wave the hyperbolic frequency modulated signal, one of the nonlinear chirp signal, is used and it is robust in the Doppler channel. The proposed method was analyzed and compared to conventional method by simulation. When the doppler shift existed, the error probability of the proposed method is reduced by 5~12 % than conventional method with linear frequency modulated signal. Sea trial was performed to analyze the performance of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.540-545
• /
• 2013

The Fractional Fourier transform, as a generalization of the classical Fourier Transform, was first introduced in quantum mechanics. Because of its simple and useful properties of Fractional Fourier transform in time-frequency plane, various research results in sonar and radar signal processing have been introduced and shown superior results to conventional method utilizing Fourier transform until now. In this paper, we applied Fractional Fourier transform to sonar signal processing to detect and separate the overlapping linear frequency modulated signals. Experimental results show that received overlapping LFM(Linear Frequency Modulation) signals can be detected and separated effectively in Fractional Fourier transform domain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.351-358
• /
• 2013

We propose a correction method of nonlinear frequency sweep in an FMCW(Frequency Modulated Continuous Wave) laser range finder. FMCW laser range finder requires linear frequency sweep for high resolution, and nonlinear frequency sweep makes the system performance degrade. In general, VCO(Voltage Controlled Oscillator) which is a component used for frequency modulation in FMCW method has nonlinear property. To correct the nonlinear frequency sweep, we utilize an auxiliary delay structure for generating trigger signal of ADC(Analog to Digital Converter). Because the trigger signal has same rate of change with the beat signal, the nonlinearity of the beat signal can be corrected. the experimental results show that the proposed method effectively eliminates the nonlinear frequency sweep problem and enhances the system performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.138-141
• /
• 2018

In this paper, we describe the designed digital waveform of a linear frequency-modulated (FM) chirp signal using field-programmable gate arrays (FPGAs) for image radar, and this signal is modulated with an I-Q modulator, and multiplied by 24 frequency multipliers to obtain a 94-GHz W-band wideband chirp generator. The developed chirp generator is an FM signal with a 94-GHz carrier frequency and a 960-MHz bandwidth, and the flatness is less than 1.0 dB at intermediate frequency (IF) (3.9 GHz), 2.0 dB in the W-band, and it has a 0.3-W output power in the W-band.

• Journal of Advanced Navigation Technology
• /
• v.6 no.2
• /
• pp.97-103
• /
• 2002

A recent technology trends in synthetic aperture radar(SAR) requires the ultra high resolution performance in detecting and precisely identifying the targets. In this paper, as a technique for enhancing the radar range resolution, the wide band chirp connection algorithm is presented by stitching the several chirp modules with unit bandwidth based on the linear frequency modulated chirp signal waveform. The principles of the digital chirp signal generation and its architecture for implementation is described with the wide band chirp signal generator, modulator, and demodulator. The performance analysis for the presented algorithm is given with the simulation results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2003

A recent technology trends in synthetic aperture radar(SAR) requires the ultra high resolution performance in detecting and precisely identifying the targets. In this paper, as a technique for enhancing the radar range resolution, the wideband chirp connection algorithm is presented by stitching the several chirp modules with unit bandwidth based on the linear frequency modulated chirp signal waveform. The principles of the digital chirp signal generation and its architecture for implementation is briefly described, and the wideband chirp signal generator, modulator, and demodulator are designed. The performance analysis for the presented algorithm is given with the simulation results.