• 대한원격탐사학회지
• /
• 제25권6호
• /
• pp.547-557
• /
• 2009

LIDAR (LIght Detection And Ranging) is an active remote sensing technology which provides 3D coordinates of the Earth's surface by performing range measurements from the sensor. Early small footprint LIDAR systems recorded multiple discrete returns from the back-scattered energy. Recent advances in LIDAR hardware now make it possible to record full digital waveforms of the returned energy. LIDAR waveform decomposition involves separating the return waveform into a mixture of components which are then used to characterize the original data. The most common statistical mixture model used for this process is the Gaussian mixture. Waveform decomposition plays an important role in LIDAR waveform processing, since the resulting components are expected to represent reflection surfaces within waveform footprints. Hence the decomposition results ultimately affect the interpretation of LIDAR waveform data. Computational requirements in the waveform decomposition process result from two factors; (1) estimation of the number of components in a mixture and the resulting parameter estimates, which are inter-related and cannot be solved separately, and (2) parameter optimization does not have a closed form solution, and thus needs to be solved iteratively. The current state-of-the-art airborne LIDAR system acquires more than 50,000 waveforms per second, so decomposing the enormous number of waveforms is challenging using traditional single processor architecture. To tackle this issue, four parallel LIDAR waveform decomposition algorithms with different work load balancing schemes - (1) no weighting, (2) a decomposition results-based linear weighting, (3) a decomposition results-based squared weighting, and (4) a decomposition time-based linear weighting - were developed and tested with varying number of processors (8-256). The results were compared in terms of efficiency. Overall, the decomposition time-based linear weighting work load balancing approach yielded the best performance among four approaches.

• 소음진동
• /
• 제8권5호
• /
• pp.964-973
• /
• 1998

본 논문에서 자기 축수 시스템의 부상과 불평형 보상 제어기를 제안한다. 특정한 동작속도에서 불균형 진동과 부상을 제어하기위해 우리는 이산시간 Q 매개변수화 제어를 사용한다. 회전자의 속도가 p=0일 때, 회전소도와 같은 주파수로 회전자의 불균형은 없다. 그래서 부상을 만들기 위해 우리는 제어기가 z=1의 단위원에서 극점을 가지는 Q매개변수화 Q를 선택한다. 그러나 회전자의 속도가 p$\neq$0일 때, 회전속도와 같은 주파수로 정현파의 외란이 존재하게 된다. 그래서 이 외란의 점근적인 소멸을 하기위해 Q 매개화변수 제어기 자유 변수 Q가 제어기가 어떠한 회전속도 p에 대한 z=expjpTs에 있는 단위 원에서 극점을 가지도록 선택된다. 첫째로, 우리는 이 연구에서 적용된 실험적인 구성을 소개한다. 두 번째로, 우리는 차분 방정식의 형태로 자기축수 시스템의 수학적인 모델을 제안한다. 세 번째로 우리는 제안된 이산 시간 Q매개변수화 제어기 설계방법을 설명한다. 제어기의 자유 매개변수 Q는 안정한 전달함수가 된다고 가정한다. 네 번째로, 우리는 설계목적을 만족하는 자유 매개변수가 복잡한 최적문제를 풀기보다는 선형 방정식을 구함으로서 만족될 수 있다. 마지막으로 몇 개의 시뮬레이션과 실험적인 결과가 제언된 제어기를 평가하기 위해 구해진다. 획득된 결과는 회전설계 속도에서의 불균형 진동을 제어하는 제안된 제어기의 효과를 나타낸다.

• 전자공학회논문지SC
• /
• 제44권5호
• /
• pp.18-29
• /
• 2007

본 논문에서는 다중 패킷을 전송하는 네트워크 제어시스템을 대상으로, 전체 시스템의 안정성 변화를 분석할 수 있는 새로운 방법을 제안하였다. 먼저, 메시지의 최대 시간 지연을 보장할 수 있는 스케쥴링 방식과 데이터 손실을 나타낼 수 있는 이산 스위치 상태방정식을 새롭게 제시하였으며, 이를 이용하여 네트워크 제어시스템과 등가인 비동기 시스템(asynchronous dynamical system)을 유도하였다. 이후, 제어기의 샘플링 주기, 시간 지연, 데이터 전송 성공률, 전송 패킷의 개수에 따라 변화하는 네트워크 제어시스템의 안정성을 판별할 수 있도록 새로운 정리들을 제안하였다. 마지막으로, Batch Reactor 시스템을 대상으로 제안한 정리들을 적용하여 시뮬레이션하고 그 결과를 분석함으로써 본 논문에서 제안한 안정성 분석 방법의 타당성을 입증하였다.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.547-553
• /
• 2006

This paper studies digital control of biodynamic model of HIV-1 via intelligent digital redesign (IDR). The purpose of the IDR is to develop an equivalent digital fuzzy controller maintaining the satisfactory performance of an existing continuous-time fuzzy controller in the sense of the state-matching. Some conditions for the stability as well as the global state-matching are provided.. They are given by the form of the linear matrix inequalities (LMIs) and thereby easily tractable by the convex optimization techniques. The main features of the proposed method are that 1) the generalized control scheme is provided for the multirate as well as the single-rate digital controllers; 2) a new compensated block-pulse function method is applied to closely match the states of the continuous-time and the sampled-data fuzzy systems in the discrete-time domain; 3) the two-step procedure of IDR is presented to prevent the performance degradation caused by the additional stability conditions. The applicability of the proposed approach is shown through the biodynamic model of HIV-1.

• 대한조선학회논문집
• /
• 제45권3호
• /
• pp.269-279
• /
• 2008

In this paper, an underwater navigation system with adaptive receding horizon Kalman filter (ARHKF) is studied. It is well known that incorrect statistical information and temporal disturbance invoke errors of any navigation systems with Kalman filter, which makes the autonomous navigation difficult in real underwater environment. In this context, two kinds of problems are herein considered. The first one is the development of an algorithm, which estimates the noise covariance of a linear discrete time-varying stochastic system. The second one is the implementation of ARHKF to underwater navigation systems. The performance of the derived estimation algorithm of noise covariance and the ARHKF are verified by simulation and experiment in the towing tank of Seoul National University.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1659-1663
• /
• 1991

A new control design methodology is presented here which is based on a nonlinear time-series reference model. It is indicated by highly nonlinear simulations that such designs successfully stabilize troublesome aircraft maneuvers undergoing large changes in angle of attack as well as large electric power transients due to line faults. In both applications, the nonlinear controller was significantly better than the corresponding linear adaptive controller. For the electric power network, a flexible a.c. transmission system (FACTS) with series capacitor power feedback control is studied. A bilinear auto-regressive moving average (BARMA) reference model is identified from system data and the feedback control manipulated according to a desired reference state. The control is optimized according to a predictive one-step quadratic performance index (J). A similar algorithm is derived for control of rapid changes in aircraft angle of attack over a normally unstable flight regime. In the latter case, however, a generalization of a bilinear time-series model reference includes quadratic and cubic terms in angle of attack. These applications are typical of the numerous plants for which nonlinear adaptive control has the potential to provide significant performance improvements. For aircraft control, significant maneuverability gains can provide safer transportation under large windshear disturbances as well as tactical advantages. For FACTS, there is the potential for significant increase in admissible electric power transmission over available transmission lines along with energy conservation. Electric power systems are inherently nonlinear for significant transient variations from synchronism such as may result for large fault disturbances. In such cases, traditional linear controllers may not stabilize the swing (in rotor angle) without inefficient energy wasting strategies to shed loads, etc. Fortunately, the advent of power electronics (e.g., high-speed thyristors) admits the possibility of adaptive control by means of FACTS. Line admittance manipulation seems to be an effective means to achieve stabilization and high efficiency for such FACTS. This results in parametric (or multiplicative) control of a highly nonlinear plant.

• 산업경영시스템학회지
• /
• 제47권2호
• /
• pp.10-20
• /
• 2024

In recent automated manufacturing systems, compressed air-based pneumatic cylinders have been widely used for basic perpetration including picking up and moving a target object. They are relatively categorized as small machines, but many linear or rotary cylinders play an important role in discrete manufacturing systems. Therefore, sudden operation stop or interruption due to a fault occurrence in pneumatic cylinders leads to a decrease in repair costs and production and even threatens the safety of workers. In this regard, this study proposed a fault detection technique by developing a time-variant deep learning model from multivariate sensor data analysis for estimating a current health state as four levels. In addition, it aims to establish a real-time fault detection system that allows workers to immediately identify and manage the cylinder's status in either an actual shop floor or a remote management situation. To validate and verify the performance of the proposed system, we collected multivariate sensor signals from a rotary cylinder and it was successful in detecting the health state of the pneumatic cylinder with four severity levels. Furthermore, the optimal sensor location and signal type were analyzed through statistical inferences.

• Structural Monitoring and Maintenance
• /
• 제6권3호
• /
• pp.219-235
• /
• 2019

Scheduled inspections of common crossings are one of the main cost drivers of railway maintenance. Prognostics and health management (PHM) approach and modern monitoring means offer many possibilities in the optimization of inspections and maintenance. The present paper deals with data driven prognosis of the common crossing remaining useful life (RUL) that is based on an inertial monitoring system. The problem of scheduled inspections system for common crossings is outlined and analysed. The proposed analysis of inertial signals with the maximal overlap discrete wavelet packet transform (MODWPT) and Shannon entropy (SE) estimates enable to extract the spectral features. The relevant features for the acceleration components are selected with application of Lasso (Least absolute shrinkage and selection operator) regularization. The features are fused with time domain information about the longitudinal position of wheels impact and train velocities by multivariate regression. The fused structural health (SH) indicator has a significant correlation to the lifetime of crossing. The RUL prognosis is performed on the linear degradation stochastic model with recursive Bayesian update. Prognosis testing metrics show the promising results for common crossing inspection scheduling improvement.

• 방송공학회논문지
• /
• 제24권5호
• /
• pp.879-891
• /
• 2019

본 논문에서는 고정 수신 환경에서 ATSC(Advanced Television Systems Committee) 3.0 MIMO(multiple-input multiple-output)의 채널 추정 방법에 따른 성능 평가를 제시하였다. ATSC 3.0 MIMO 시스템은 기존의 지상파 방송 시스템에 비해 높은 주파수 효율성(spectral efficiency)과 향상된 수신 성능을 얻을 수 있다. ATSC 3.0 MIMO의 파일럿 인코딩 알고리즘(pilot encoding algorithm)으로서 Walsh-Hadamard 인코딩과 널 파일럿(null pilot) 인코딩이 정의되어 있고, 단일 입력 단일 출력(single-input single-output)에 비해 크기와 위상이 달라진다. 수신기에서 파일럿 신호에 대한 채널 추정 후 데이터 신호에 대한 채널 추정을 위한 보간(interpolation)이 수행되는데, 이 때 시간 축과 주파수 축에 대해 선형 보간과 DFT(discrete Fourier transform) 기반 보간 방법을 적용할 수 있다. 본 논문에서는 시간 축과 주파수 축에 대해 가능한 보간 방법의 조합을 구성한 뒤, 전산 실험을 통해 다양한 보간 방법의 성능을 분석하였다. 전산 실험 결과는 시간 축으로 선형 보간을 먼저 수행한 후 주파수 축으로 DFT 기반 보간을 수행하는 조합이 가장 좋은 성능을 얻을 수 있음을 보여준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1901-1904
• /
• 2003

MPC or model predictive control is representative of control methods which are able to handle physical constraints. Closed-loop stability can therefore be ensured only locally in the presence of constraints of this type. However, if the system is neutrally stable, and if the constraints are imposed only on the input, global aymptotic stability can be obtained; until recently, use of infinite horizons was thought to be inevitable in this case. A globally stabilizing finite-horizon MPC has lately been suggested for neutrally stable continuous-time systems using a non-quadratic terminal cost which consists of cubic as well as quadratic functions of the state. The idea originates from the so-called small gain control, where the global stability is proven using a non-quadratic Lyapunov function. The newly developed finite-horizon MPC employs the same form of Lyapunov function as the terminal cost, thereby leading to global asymptotic stability. A discrete-time version of this finite-horizon MPC is presented here. The proposed MPC algorithm is also coded using an SQP (Sequential Quadratic Programming) algorithm, and simulation results are given to show the effectiveness of the method.