• 한국재료학회지
• /
• 제31권7호
• /
• pp.382-385
• /
• 2021

Well-crystallized vanadium pentoxide V₂O₅ thin films are fabricated on MgO single crystal substrates by using pulsed-laser deposition technique. The linear optical transmission spectra are measured and found to be in a wavelength range from 300 to 800 nm; the data are used to determine the linear refractive index of the V₂O₅ films. The value of linear refractive index decreases with increasing wavelength, and the relationship can be well explained by Wemple's theory. The third-order nonlinear optical properties of the films are determined by a single beam z-scan method at a wavelength of 532 nm. The results show that the prepared V₂O₅ films exhibit a fast third-order nonlinear optical response with nonlinear absorption coefficient and nonlinear refractive index of 2.13 × 10^-10 m/W and 2.07 × 10^-15 cm²/kW, respectively. The real and imaginary parts of the nonlinear susceptibility are determined to be 3.03 × 10^-11 esu and 1.12 × 10^-11 esu, respectively. The enhancement of the nonlinear optical properties is discussed.

• Structural Engineering and Mechanics
• /
• 제60권5호
• /
• pp.891-902
• /
• 2016

The beam structure with breathing cracks subjected to harmonic excitations was modeled by FEM based on Euler-Bernoulli theory, and a piecewise dynamical system was deduced. The precise integration method (PIM) was employed to propose an algorithm for analyzing the dynamic responses of the deduced system. This system was first divided into linear sub-systems, between which there are switching points resulted from the breathing cracks. The inhomogeneous terms due to the external excitations were tackled by introducing auxiliary variables to express the harmonic functions, hence the sub-systems are homogeneous. The PIM was then applied to solve the homogeneous sub-systems one by one. During the procedures, a predictor-corrector algorithm was presented to determine the switching points accurately. The presented method can provide solutions with an accuracy to a magnitude of $10^{-12}$ compared with exact solutions obtained by the theories of ordinary differential equations. The PIM results are much more accurate than Newmark ones with the same time step. Moreover, it is found that the PIM can maintain a high level of accuracy even when the time step increases within a relatively wide range.

• Smart Structures and Systems
• /
• 제18권2호
• /
• pp.335-354
• /
• 2016

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.

• 한국전산구조공학회논문집
• /
• 제32권6호
• /
• pp.359-366
• /
• 2019

PS 강거더의 비선형, 비탄성 거동에 대한 편향부 효과를 조사하기 위하여 PS 시스템의 거동특성에 대한 실험적 및 이론적 연구를 수행한다. 이를 위하여 H빔, 편심을 갖는 직선 케이블, 정착부, 그리고 편향부를 갖는 4개의 시험체를 제작하여 2점 하중에 의한 파괴거동시험을 수행한다. 또한, 편향부가 없는 경우와 등간격으로 3개의 편향부가 설치된 경우의 PS 시스템에 대하여 면내 변형이론을 새로이 정식화하고 symbolic 연산을 수행할 수 있는 메스메티카를 이용하여 비선형해를 구한다. 실험 및 이론적 연구의 타당성을 검증하기 위하여 박벽보요소, 강성이 매우 큰 보요소, 그리고 케이블-트러스요소로 구성되는 유한요소모델을 구축하고 비탄성해석을 수행하여 그 결과를 실험결과 및 해석해와 비교한다. 결과적으로 외부에 설치된 비부착 편향부로 인하여 H빔의 횡변위가 강하게 구속되어 PS 시스템의 강성 및 파괴강도는 편향부가 없는 경우와 비교할 때 크게 증가한다.

• Structural Engineering and Mechanics
• /
• 제88권1호
• /
• pp.1-12
• /
• 2023

In this study, forced vibration behavior of a piezo magneto electric sandwich Timoshenko beam is investigated. It is assumed a sandwich beam with porous core and graphene platelet reinforced composite (GPLRC) in facesheets subjected to magneto-electro-elastic and temperature-dependent material properties. The magneto electro platelets are under linear function along with the thickness that includes a cosine function and magnetic and electric constant potentials. The governing equations of motion are derived using modified strain gradient theory for microstructures. The effects of material length scale parameters, temperature change, different distributions of porous, various patterns of graphene platelets, and the core to face sheets thickness ratio on the natural frequency and excited frequency of a sandwich Timoshenko beam are scrutinized. Various size-dependent methods effects such as MSGT, MCST, and CT on the natural frequency is considered. Moreover, the final results affirm that the increase in porosity coefficient and volume fractions lead to an increase in the amount of natural frequency; while vice versa for the increment in the aspect ratio. From forced vibration analysis, it is understood that by increasing the values of volume fraction and the length thickness of GPL, the maximum deflection of a sandwich beam decreases. Also, it is concluded that increasing the temperature, the thickness of GPL, and the initial force leads to a decrease in the maximum deflection of GPL. It is also shown that resonance phenomenon occurs when the natural and excitation frequencies become equal to each other. Outcomes also reveal that the third natural frequency owns the minimum value of both deflection and frequency ratio and the first natural frequency has the maximum.

• 대한토목학회논문집
• /
• 제12권2호
• /
• pp.1-10
• /
• 1992

이 논문에서는 철근 콘크리트 부재의 전단 해석을 위한 트러스 유사법이 발전된 형태인 '빗 구조' 해석 모델을 부분 프리스트레스트 콘크리트 부재의 전단 해석을 위해 수정하여 제안 하였다. 제안된 '빗 구조' 모델은 콘크리트 압축대의 위치와 경사 및 사압축대의 경사가 하중과 프리스트레스의 크기에 따라서 변하는 것이다. 역학적 모델의 구성을 위하여 비선형 보, 트러스 요소를 사용하였으며, 사압축대의 경사를 결정하기 위한 식을 '압축대' 이론을 수정하여 유도하였다. '빗구조' 모델에 의한 해석 결과를 부분 프리스트레스트 콘크리트 부재의 재하 실험 결과와 비교하였다. 이에 따르면 '빗 구조' 해석 결과에 의한 전단 철근의 응력은 수정 M$\ddot{o}$rsch이론과 고전 M$\ddot{o}$rsch 이론에 의한 계산치의 중간 정도의 값이다. 처짐과 전단철근의 응력값을 비교한 결과, 본 논문에서 제안된 '빗 구조' 모델이 부분 프리스트페스트 콘크리트 부재의 전단 해석에 사용될 수 있음을 알 수 있었다.

• 대한조선학회지
• /
• 제24권1호
• /
• pp.51-66
• /
• 1987

In this paper, the authors investigate theoretically the motion and longitudinal strength of ships among waves talking account of the effects of nonlinearities such as the hull shape, bottom emergence, and hydrodynamic impact. Incidentally the ship is treated as an elastic beam in heading wave condition regarding characteristics of slamming and whipping-according to the variation in the range of a quarter length of the ship forward and the increase of the elastic modes up to 4-th vibration mode were investigated by the present theory. Calculations are performed for 97m container ship and its validity is confirmed by a series of model tests. Conclusions obtained are as follows; 1) Acceleration and pressure estimated by the present theory are in good accordance with experiments. 2) The present non-linear theory may be applied for estimating longitudinal bending moment of ships in slamming and whipping conditions. 3) In investigation of the characteristic in response according to shape variation for parts under draft and vow-flare in the range of a quarter length of the ship forward, dynamic responses due to the former were much more conspicuous than those due to the later. 4) In the maximum bending moment, the considering case up to 2-the mode are larger, about $10{\sim}15%$, than that up to 4-th mode.

• 한국농공학회지
• /
• 제42권6호
• /
• pp.122-129
• /
• 2000

The purpose of this study is to investigate both the fundamental and some higher natural frequencies and mode shapes of compressive members resting on the linear elastic foundation. The model of compressive member is based on the classical Bernoulli-Euler beam theory. The differential equation governing free vibrations of such members subjected to an axial load is derived and solved numerically for calculating the natural frequencies and mode shapes. The Improved Euler method is used to integrate the differential equation and the Determinant Search method combined with the Regula-Falsi method to determine the natural frequencies, respectively. In numerical examples, the hinged-hinged, hinged-clamped, clamped-hinged and clamped-clamped end constraints are considered. The convergence analysis is conducted for determining the available step size in the Improved Euler method. The validation of theories developed herein is also conducted by comparing the numerical results between this study and SAP 90. The non-dimensional frequency parameters are presented as the non-dimensional system parameters: section ratio, modulus parameter and load parameter. Also typical mode shapes are presented.

• 한국전산구조공학회논문집
• /
• 제22권3호
• /
• pp.267-275
• /
• 2009

이 논문에서는 복합재료 적층판 해석을 위해 등가단층요소와 부분-선형 층별 적층요소를 서로 연계시킨 결합요소를 제안하였다. 등가단층요소는 퇴화 쉘요소에 의해 정식화되었으며, 반면에 부분-선형 층별요소의 경우 면내변위는 부분적 선형변화로, 두께방향으로의 면외변위는 일정하다고 가정하였다. 제안된 유한요소모델은 p-수렴방식에 기초를 두고 있다. 변위장 보간을 위해 적분형 르장드르 다항식이, 수치적분을 수행하기 위해서는 가우스-로바토 적분을 각각 채택하였다. 이 연구에서는 주로 p-수렴 결합요소의 검증을 위해 다양한 형태의 유한요소 다중모델에 대해 안정된 수치해석값을 보여주는 지에 초점을 두었다. 채택한 예제는 정해를 쉽게 알고 있는 단순한 문제로 인장력을 받는 평판 또는 연직하중을 받는 캔틸레버보에 적용하여 제안된 요소의 성능을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제35권2호
• /
• pp.141-173
• /
• 2010

In this paper a boundary element method is developed for the general flexural-torsional buckling analysis of Timoshenko beams of arbitrarily shaped cross section. The beam is subjected to a compressive centrally applied concentrated axial load together with arbitrarily axial, transverse and torsional distributed loading, while its edges are restrained by the most general linear boundary conditions. The resulting boundary value problem, described by three coupled ordinary differential equations, is solved employing a boundary integral equation approach. All basic equations are formulated with respect to the principal shear axes coordinate system, which does not coincide with the principal bending one in a nonsymmetric cross section. To account for shear deformations, the concept of shear deformation coefficients is used. Six coupled boundary value problems are formulated with respect to the transverse displacements, to the angle of twist, to the primary warping function and to two stress functions and solved using the Analog Equation Method, a BEM based method. Several beams are analysed to illustrate the method and demonstrate its efficiency and wherever possible its accuracy. The range of applicability of the thin-walled theory and the significant influence of the boundary conditions and the shear deformation effect on the buckling load are investigated through examples with great practical interest.