• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.130-134
• /
• 1993

The magnetic properties of the amorphous $Fe_{73.5-X}Co_{X}Cu_{1}Nb_{3}Si_{13.5}B_{9}(x=2,\;4)$ alloys, fabricated by a single roll rapid quenching technique and annealed at $400~650^{\circ}C$, have been investigated. The optimum annealing temperature is $550^{\circ}C$ for the amorphous $Fe_{71.5}Co_{2}Cu_{1}Nb_{3}Si_{13.5}B_{9}$ alloy. The properties of the nanocrystalline $Fe_{71.5}Co_{2}Cu_{1}Nb_{3}Si_{13.5}B_{9}$ alloy show the relative permeability of $1.1{\times}10^{4}$ and the coercive force of 0.22 Oe at 1 kHz. When annealed at $600^{\circ}C$, the nanocrystalline $Fe_{69.5}Co_{4}Cu_{1}Nb_{3}Si_{13.5)B_{9}$ alloy shows the relative permeability of $1.0{\times}10^{4}$ and the coercive force of 0.19 Oe at 1 kHz. From the X-ray measurement, it is found that the remarkably improved soft magnetic properties are the effect of the formation of $\alpha$-Fe(Si) grain. By the results of FMR exper-imeIlt, the optimum annealing condition is just below temperature which the peak-to-peak line width of FMR spectrum increase rapidly.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.183-189
• /
• 2018

This study deals with the design and development of imaging optics having 24mm focal length for MWIR ($3{\sim}5{\mu}m$) with two symmetrical lenses facing each other. We used CodeV in our optical design, and we performed the optimization process to have the resolution and angle of view satisfying the user's requirements. The materials of lenses were limited to two types, including KCIR035 with a refractive index of 1.7589, developed in Korea. The optical system designed in this way consists of two aspherical lenses made of KCIR035 material having the same shape and one spherical lens made of Si. Here, the arrangement of the two aspherical lenses is characterized by having a symmetrical structure facing each other. And this optical system has a resolution of MTF value of 0.35 or more at a line width of 20 lp / mm. Therefore, it is considered that this optical system has the capability to be applied to a thermal imaging camera using a $206{\times}156$ array MWIR detection device having a pixel size of $25{\mu}m$.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.5-13
• /
• 2016

This research is focused on the seepage behavior of embankment which had the weak zone with big permeability. The distributed TDR (Time Domain Reflectometer) and point sensors such as settlement gauge, pore water pressuremeter, vertical total stressmeter, and FDR (Frequency Domain Reflectometer) sensor were used to measure the seepage characteristics and embankment behavior. Also, the measured data were compared to the data of 2-D and 3-D numerical analysis. The dimension of model embankment was 7 m length, 5 m width and 1.5 m height, which is composed of fine-grained sands and the water level of embankment was 1.3 m height. The seepage behavior of measuring and numerical analysis were very similar, it means that the proper sensing system can monitor the real-time safety of embankment. The result by 2-D and 3-D numerical analysis showed similar saturation processing, however in case of weak zone, the phreatic lines of 2-D showed faster movement than that of 3-D analysis, and finally they converged.

• Journal of Acupuncture Research
• /
• v.33 no.3
• /
• pp.89-99
• /
• 2016

Objectives : This study was performed to develop objective methods for evaluating facial palsy sequelae using a 3D Facial Scanning System. Methods : Fifty-eight patients with facial palsy sequelae were selected. Their medical records were reviewed to collect demographic data, facial palsy sequelae evaluation, Facial Disability Index questionnaire, and test results (3D Facial Scanning System). Five different facial expressions (at rest, eye closure, eyebrow elevation, smiling, and whistling) were photographed. Sunnybrook Scale was associated with distances between predetermined facial points. Results : The average Sunnybrook composite score was $58.88{\pm}17.31$. Secondary movements (mouth to eye synkinesis, contracture of eye, and contracture of mouth) showed significant difference according to the Sunnybrook Scale. In voluntary movements, eyebrow height at eyebrow elevation, length between mouth angle and central line while whistling, and eyelid width at maximum eye opening showed significant difference. Facial palsy Sequelae Index (FSI) was correlated with Sunnybrook sub-scales (resting symmetry, voluntary movement, and synkinesis). Conclusion : These results demonstrate that a 3D Facial Scanning System is useful for evaluating facial palsy sequelae. This method may facilitate objective evaluation for facial palsy sequelae and it could be applied in clinical trials.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.535-546
• /
• 1996

The purpose of this study was to classify mandibular dental arch forms based on Raberin's method, and to compare Raberin's arch forms with that of the Korean's, and to designate arch form of bracket level according to distance between cusp tip and buccal surface of bracket level. The sample consisted of 159 mandibular dental casts showing normal occlusion which was taken from 62 males and 97 females of the Korean, aging from 13 to 25 years. The model was taken by X-ray. The landmarks were cusp points which expressed the mandibular dental arch line of cusp tips and buccal points which were measured from cusp tips to buccal surfaces of bracket level. The landmarks on the film were digitized, and measurements and statistics were performed. The results were as follows; 1. The models were classified as type 1, type 2, type 3, type 4 and type 5 by the author, and polynomial functions of the six degree and R-square values were calculated using statistical method, and each calculated equations explained each group with the least R-square value of 0.97, and each arch forms' were plotted. 2. The distribution of type 1 was $17.6\%$, type 2 $20.8\%$, type 3 $20.8\%$, type 4 $16.3\%$ and type 5 $24.5\%$. 3. The Korean arch form was characterized by larger width, smaller height compared to the French arch form. 4. The designated arch form of bracket level, viz the distance between cusp point and buccal point was calculated. The distance between cusp point and buccal point of incisor was 1mm, canine 1.9mm, first premolar 2.5mm, second premolar 2.6mm, first molar 2.7mm and second molar 2.7mm.

• Journal of the Korean Society of Costume
• /
• v.1
• /
• pp.101-117
• /
• 1977

This thesis is a study of the Simui(深衣) system which was a dress regulation peculiar to old China with skirt and coat. The origin of Simui is a very long time, that is, before Ju dynasty in China. Its wearing range had a large circle irrespective of rank and good or bad luck. This was a ordinary dress to the Emperor or the lords, a below court attire or a below sacrificial rites attire to the illustrious officials, and good luck dress to the common people. But this was a funeral rites attire or coming-of-age ceremony attire in domestic behaviour. In the times of Song dynasty, lots of confucian scholars had put on this simui because of Juhi's recommendation for domestic behaviour. This Simui had been put on through all the times of China and was the original text of all the dress. Especially the court attire and silkworm working dress of Empress, and the court attire and underwear court attire of Emperor is also made out of this Simui, therefore this is a origin of the ceremonial dress which formed into long coat. In Korea it is said that this Simui was brought in prior to the middle of Goryeo dynasty. But we can't tell the correct transmitted age. According to the following records in Goryeo History, "King had put on the Simui as a sacrificial rite attire in the times of Yejong". It is sure that this Simui was brought in prior to the times of Yejong. In fact, lots of confucian scholars had put on the Simui since the introduction of confucianism in the end of Goryeo dynasty and after that time this was taken by many confucian scholars through Yi dynasty. Korean Simui system was complied with Chinese system through confucian domestic behaviour, This was respected for court dress of confucian scholars, as it were, Chumri, (an ordinary dress of scholars), Nansam (a uniform of upper student), and Hakchangui (a uniform of confucian student). There are many deta about Simui system in the book of Yeki, chapter Okcho and Simui, and other many canfucian books. But we didn't demonstrate the theory about it till now. Especially there are diversifies of opinions about the phrase of "Sok Im Ku Byun" in Yeki. Simui was cut in separate and then was stitched together in one piece. Generally its shape had round sleeve and angled lapel, its length reaches to the anklebone. And it has a line around the lapel, the sleeve band, and the edge of skirt. It is called Simui because the body can be wrapped deeply in broad width and large sleeve. The Simui was made of white fine linen and was cut by the natural size of body. Every part of Simui had a profound meaning; the round sleeve in compliance with regulation can keep a courtesy when a walker moves his hands and the angled lapel like a carpenter's square in compliance with square keeps them front loosing their Justice and a string of the back also keeps them loosing from their righteousness and the flat lower part of Simui makes their heart and mind calm. This Simui was usually attendant on a head cover and belt made cloth, and black shoes. This thesis was made a study of documents and portrait from Yi dynasty, for the actual object was not obtained.

• The Korean Journal of Malacology
• /
• v.17 no.2
• /
• pp.71-78
• /
• 2001

Age and growth of the pen shell, Atrina (Servatrina) pectinata japonica, on the west coast of Korea were studied based on 701 samples caught in April 1995 to March 1996. The results are summarized as follows: the relationship between shell height and ring radius in each ring group was expressed as a regression line. Therefore, it could be recognized that there is a correspondence in the formation of each ring. Based on the monthly variation of the marginal index (MI') of the shell, it was assumed that the ring of this species was formed once a year during the period of June to July. The relationship between shell height (SH) and total weight (TW) were expressed by the following equation TW = 5.906$\times$10/$^{-3}$SH$^{3.844}$. Shell length (SL) and shell height were highly correlated according to the following equation SL = 0.5277 SH +0.0934. The shell height-shell width (SW) relation was expressed by the following equation SW = 0.2681 SH -1.3757. Growth curves for shell height and total weight fitted to the von Bertalanffy's equation were expressed as: SHt=30.99(1-e-$^{-0.3212(t+0.9653)}$, TWt=657.94(1-e-$^{-0.3212(t+0.9653}$)$^{3.3844}$.

• The Korean Journal of Malacology
• /
• v.19 no.2
• /
• pp.125-132
• /
• 2003

Age and growth of the the Jedo venus clam, Protothaca jedoensis were investigated using samples from the subtidal zone of Boryeong, Chungcheongnam- do, Korea from January to December, 1999. The relationship between shell height and ring radius in each group was expressed as a regression line. Therefore, it could be recognized that there is a correspondence in the formation of each ring. Based on the monthly variation of the marginal index of the shell, it was suggested that the annual ring mark formation occurred during the period of February to March once a year. The relationship between shell height (SH) and total weight (TW) was represented by the non-linear equation: TW = 0.0007 SH$^{2.8919}$, and also in the relationship between shell length (SL) and shell height (SH), shell height (SH) and shell width (SW) were represented by the linear equations: SL=1.1067SH+1.778, SW=0.6758SH-0.9824. Growth curves for shell height and total weight fitted to the von Bertalanffy equation were expressed as: SH$_t$ = 81.546(1-e$^{-0.176(t+0.381)}$), TW$_t$ = 227.65(1-e$^{-0.176(t+0.381)})^{2.8919}$.

• Research in Plant Disease
• /
• v.19 no.3
• /
• pp.229-232
• /
• 2013

Sclerotium rot of cucumber (Cucumis sativus L.) occurred at the experimental field of Gyeongsangnam-do Agricultural Research and Extension Services in July 2012. The typical symptoms included wilt, rot, and water-soaking on stems and fruits and severely infected plants eventually died. White mycelial mats spread over lesions, and then sclerotia were formed on fruit and near soil line. The sclerotia were globoid in shape, white to brown in color and 1-3 mm in size and the hyphal width was 4-8 ${\mu}m$. The optimum temperature for mycelial growth and sclerotia formation on PDA was $30^{\circ}C$. The typical clamp connections were observed in the hyphae of the fungus grown on PDA. For further identification, the complete internal transcribed spacer (ITS) rDNA region was amplified and sequenced. On the basis of mycological characteristics, ITS rDNA region comparison, and pathogenicity to host plants, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report of sclerotium rot on cucumber caused by S. rolfsii in Korea.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.168-173
• /
• 2003

Recently, according to the rapid progress in Flat-panel-display industry, there has been a growing interest in the poly-Si process. Compared with a-Si, poly-Si offers significantly high carrier mobility, so it has many advantages to high response rate in Thin Film Transistors (TFT's). We have investigated a new process for the high temperature Solid Phase Crystallization (SPC) of a-Si films without any damages on glass substrates using thin film heater. because the thin film heater annealing method is a very rapid thermal process, it has very low thermal budget compared to the conventional furnace annealing. therefore it has some characteristics such as selective area crystallization, high temperature annealing using glass substrates. A 500 $\AA$-thick a-Si film was crystallized by the heat transferred from the resistively heated thin film heaters through $SiO_2$ intermediate layer. a 1000 $\AA$-thick $TiSi_2$ thin film confined to have 15 $\textrm{mm}^{-1}$ length and various line width from 200 to 400 $\mu\textrm{m}$ was used as the thin film heater. By this method, we successfully crystallized 500 $\AA$-thick a-Si thin films at a high temperature estimated above $850^{\circ}C$ in a few seconds without any thermal deformation of g1ass substrates. These surprising results were due to the very small thermal budget of the thin film heaters and rapid thermal behavior such as fast heating and cooling. Moreover, we investigated the time dependency of the SPC of a-Si films by observing the crystallization phenomena at every 20 seconds during annealing process. We suggests the individual managements of nucleation and grain growth steps of poly-Si in SPC of a-Si with the precise control of annealing temperature. In conclusion, we show the SPC of a-Si by the thin film heaters and many advantages of the thin film heater annealing over other processes