• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.2
• /
• pp.36-47
• /
• 1998

Low power circuit techniques have been developed to realize the highest possible performance of embedded SRAM at 1V power supply with$0.5\mu\textrm{m}$ single threshold CMOS technology in which the unbalance between NMOS and PMOS threshold voltages is utilized to optimize the low power CMOS IC design. To achieve the best trade-off between the transistor drivability and the subthreshold current increase, the ground potential of memory array is raised to suppressthe subthreshold current. The problems of lower cellstability and bit-line dealy increase due to the enhanced array ground potential are evaluated to be controlled within the allowable range by careful circuit design. 160MHz, 128kb embedded SRAM with 3.4ns access time is demonstrated with the power consumption of 14.8mW in active $21.4{mu}W$ in standby mode at 1V power supply.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1116-1118
• /
• 1990

This paper describes the required frequency bandwidth which is used as a measure for the quality of the PFM transmission system to transmit the control signals. First, the PFM signal which has been distorted due to the frequency bandwidth limit on the transmission line is analyzed by Fourier transform and secondly distortion which has been observed at the receiver is numerically analyzed to make the frequency bandwidth required for transmitting the PFM signals. According to the analysis heretofore, the 50% threshold level for shaping the received PFM signal, which is of 50 % in TTL level, is superior than the 10- and 90-% threshold levels.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.285-290
• /
• 2010

We investigate the outage probability in terms of QoS (quality of service) in indoor PLC network. We consider various kinds of appliances for realistic indoor PLC network. For estimation of the outage probability, we calculate the time-varying channel responses considering the loading conditions based on regular human activities and include the additive noise. We calculate the outage probability for each terminal and investigate relationship between the outage probability and the channel length, and transmit powers. Our results suggest that the outage probability is increased when the channel length becomes longer because more appliances affect the amount of reduced channel capacity and is not improved distinctly for very high and low outage threshold by increasing the transmit power. However, we can see outage probability improvement for 30% outage threshold case by increasing the transmit power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.524-527
• /
• 2000

In this paper, we have studied minimization of the burr which occurred after $\mu$-BGA(ball grid array) singulation process, singulation of the multilayer with a pulsed Nd:YAG(266, 532 nm) laser is used to cut the metal layer which doesn't well absorb laser beam. Especially, the photoresist and $N_2$blowing is effective to minimize of the surface demage and burr. In this experiment, the $N_2$ blowing reduces a laser energy loss by debris and suppress a surface oxidation. The SEM(scanning electron microscopes) and non-contact 3D inspector are used to measure cutting line-width and surface demage. The $\mu$-BGA singulation threshold energy is 75.0 J/cm$^2$at 30 ${\mu}{\textrm}{m}$/s scan speed.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.710-716
• /
• 2002

A General Pipe Break Prediction Model that incorporates linear and exponential models in its form is developed. The model is capable of fitting pipe break trends that have linear, exponential or in between of linear and exponential trend by using a weighting factor. The weighting factor is adjusted to obtain a best model that minimizes the sum of squared errors of the model. The model essentially plots a best curve (or a line) passing through "cumulative number of pipe breaks" versus "break times since installation of a pipe" data points. Therefore, it prevents over-predicting future number of pipe breaks compared to the conventional exponential model. The optimal replacement time equation is derived by using the Threshold Break Rate equation by Loganathan et al. (2002).

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.3
• /
• pp.59-63
• /
• 2010

This paper proposes computer visual inspection algorithms for various LCD defects which are found in a manufacturing process. Modular vision processing steps are required in order to detect different types of LCD defects. Those key modules include RGB filtering for pixel defects, gray-scale morphological processing and Hough transform for line defects, and adaptive threshold for spot defects. The proposed algorithms can give users detailed information on the type of defects in the LCD panel, the size of defect, and its location. The machine vision inspection system is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithms are quite successful.

• Journal of Environmental Health Sciences
• /
• v.43 no.4
• /
• pp.247-256
• /
• 2017

Objectives: The deaths of Korean victims exposed to the disinfectant CMIT/MIT have remained unresolved. This is mainly due to a lack of concordance between the few available toxicity tests and the abundant epidemiological data, making it difficult to establish a cause-and-effect relationship. Therefore, this study was carried out to investigate any potential associations between CMIT/MIT exposure and death. Methods: Groups of experimental and control C57BL/6 mice were instilled (in the trachea) with chloromethylisothiazolinone/methylisothiazolinone (CMIT/MIT) using a visual instillobot. CMIT/MIT was instilled over a period of three days and eight weeks, respectively, to achieve acute and chronic exposures. A threshold dose-response model was applied for estimating the threshold level as one line of evidence for a causal association between CMIT/MIT and death. Results: An acute exposure of 1.2 mg ai/kg/day of CMIT/MIT was estimated to reflect the threshold for death. The dose-response curve with this threshold showed a very steep slope and a narrow range of CMIT/MIT exposures. The narrow range of CMIT/MIT exposures, in particular, indicated an evident boundary between survival and death, thus implicating a strong causal association. A similar threshold dose-response relationship observed following acute exposure was also seen following chronic exposure to CMIT/MIT. Airborne disinfectant exposure was visible as minimal or mild lung damage with no fibrosis, as shown by histopathological tests. However, many observations are considered to be functional respiratory tract or lung failure due to death, as observed in necropsies of the mice that died due to CMIT/MIT exposures. Conclusions: There are two strong lines of evidence for a causal association between death and CMIT/MIT exposure: 1) The threshold dose-response curve, with a very steep slope and a narrow range of CMIT/MIT exposures showing a visible boundary between survival and death; and 2) many cases of functional respiratory or lung failure.

• Journal of Korea Water Resources Association
• /
• v.54 no.5
• /
• pp.311-320
• /
• 2021

The agricultural water, which occupy about 61% of total water usage in the South Korea, is significantly objective to archieve effecitive water resources management. The objective of the study is to suggest a simple method in actual practice that could be used to estimate agricultural water usage in river considering hydrological condition. Historical record of agricultural water usage and runoff, which take account for hydrological condition of the basin, were obtained for totally 27 river basins. As the result, the high threshold value of the agricultural water usage rates compared to maximum usage amount has a particular correlations to the percent of normal year runoff for last 2 month, and threshold line of agricultural water usage rates was derived using the quantile regressions. Finally, two dimensionless threshold line and empirical formulas that described the correlation between the percent of normal year runoff for last 2 month and the agricultural water usage rate compared to maximum usage amount were derived. Also, the simple criteria to select which line and formula based on the characteristics of the basins was suggested but it need further studies. The result of the study could be used as an elemantary data in actual practice for water resoureces management.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.358-379
• /
• 2010

Multiple object association is an important capability in visual surveillance system with multiple cameras. In this paper, we introduce locally initiating line-based object association with the parallel projection camera model, which can be applicable to the situation without the common (ground) plane. The parallel projection camera model supports the camera movement (i.e. panning, tilting and zooming) by using the simple table based compensation for non-ideal camera parameters. We propose the threshold distance based homographic line generation algorithm. This takes account of uncertain parameters such as transformation error, height uncertainty of objects and synchronization issue between cameras. Thus, the proposed algorithm associates multiple objects on demand in the surveillance system where the camera movement dynamically changes. We verify the proposed method with actual image frames. Finally, we discuss the strategy to improve the association performance by using the temporal and spatial redundancy.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.1002-1013
• /
• 1996

The segmentation of characters is an important step in the automatic recognition of handwritten text. This paper proposes the segmenting method of off-line handwritten Hangul. The suggested approach is based on the structural characteristics of Hangul. The first step extracts the local features. connected component and strokes from the imput word. In the second step we identify the class of strokes. The third segmenting step specifies WRC(White Run Column) before consonant or horizontal vowel. If the segment is longer than threshold, the system estimates segmenting columns using the consonant-vowel information and column features, and then finds a cornered boundary along the strokes within the estimated segmenting columns.