• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.303-314
• /
• 2021

To understand how to efficiently observe the biomass and community of phytoplankton, phytoplankton sampling was carried out from June to October 2019 at the Yeongju dam sediment control reservoir(YJ) and Bohyeonsan dam reservoir(BH1 and BH2). The results derived from microscopic observation, such as the conventional phytoplankton qualitative/quantitative analysis, and from the CHEMTAX method based on the pigments, were compared. The relative contribution of phytoplankton, calculated by the microscopy and CHEMTAX methods, showed a significant difference in all four classes: cryptophyta, chlorophyta, cyanobacteria, and diatoms. In addition, the correlation between the two observation methods was poor. This might be caused by methodological differences in microscopy that do not consider the varying cell sizes among phytoplankton species. In this study, by converting the cells into carbon, the slope between both carbon biomasses based on microscopy and CHEMTAX was improved close to the 1 : 1 line, and the y-intercept was closer to 0 for cryptophyta and diatoms. For cyanobacteria, the slope increased, the y-intercept decreased, and the plot approached 1 : 1 although the correlation coefficients were not improved in all classes. The present study suggests that application of CHEMTAX based on pigment analysis could be a possible approach to efficiently determine the relative carbon proportions of individual classes of phytoplankton community composition.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.434-441
• /
• 2014

This study is purposed to measure airborne asbestos concentrations at demolition sites and surrounding areas of asbestos containing buildings in Seoul and examine whether the measurement results correspond with allowable exhaust standard for asbestos of the Asbestos Safety Control Act. The airborne asbestos concentrations for 37 sites were below the detection limit ($7fiber/mm^2$) in 101 (35%) out of 288 samples. The whole average airborne asbestos concentration in 37 sites was $0.003{\pm}0.002f/cc$(max 0.0013 f/cc) and almost the whole airborne asbestos concentrations were satisfied with allowable exhaust standard for asbestos, 0.01 f/cc, of the Asbestos Safety Control Act. So possibility of asbestos exposure is not yet a major concern at current levels for sites demolished of asbestos containing buildings in Seoul. Looking at each sampling point, the average airborne asbestos concentrations in boundary line of site, entrance of sanitation, around the workplace (in), around the workplace (out), negative pressure units, storage area for waste, outlet for waste and residential area of residents were respectively $0.002{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.005{\pm}0.004f/cc$, $0.005{\pm}0.003f/cc$ and $0.003{\pm}0.002f/cc$. As a result, all sampling points of study were satisfied with allowable exhaust standard for asbestos, 0.01 f/cc, of the Asbestos Safety Control Act.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.2
• /
• pp.126-134
• /
• 2001

Statistical approaches for analysis of data from the limited number of samples in ship building industry(SBI) collected by an industrial hygienist for checking compliance to an occupational standard were considered. Sampling for compliance usually has been guided by judgment selection, rather than true randomness, resulting in the creation of compliance samples which approximate a censored sample from the upper tail of the exposure distribution. Similar exposure groups(SEGs) including welding and painting process were established to assess representative values in each groups after reviewing the whole production line in SBI. For the convenient statistical approaches, the code has assigned to each SEGs. The descriptive statistics and probability plotting were used to yield the representative values in each SEGs. In the first step, SEGs of 558 were established from 5 ship building companies. The 38 SEGs showed the uncertainty are divided into each 5 companies and assessed the representative values again. The 44 SEGs in each companies was not showed the normal and lognormal distribution was analyzed each data. And also, recommendation was suggested to resolve the uncertainty in each groups.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5551-5556
• /
• 2012

Cytological examination is widely used as a diagnostic tool because of the ease of collecting cells from the involved area. However, the diagnostic yield of cytological examination is unsatisfactory; the reasons include sampling error, poorly prepared samples, small numbers of malignant cells, and low grades of cellular atypia. In this study, we focused on the high infectivity of adenovirus towards epithelial cells and applied the luciferase-expressing adenoviral vector to a new cancer cell detection tool. In addition, adenoviral infectivity was enhanced by modifying viral fiber proteins. The sensitivity of the diagnostic tool was tested using the NCI-H1299 lung cancer cell line, and validated in body fluid samples from cancer patients with a variety of etiology. Results showed that the adenovirus efficiently transfected NCI-H1299 with high sensitivity. Only 10 cancer cells were sufficient for detection of luciferase signals. In body fluid samples, the adenovirus confirmed the diagnosis for malignant and benign cancer, but not in non-epithelial cell derived samples. This study provides proof-of-concept for a more reliable and sensitive diagnostic tool for epithelium-derived cancer.

• Korean journal of applied entomology
• /
• v.44 no.1 s.138
• /
• pp.73-90
• /
• 2005

Although the history of IPM can be traced back to the late 19th century, when ecology was identified as the foundation for scientific plant protection, it has been more than thirty years since first enunciation. Since than, the concept of IPM has evolved in multiple paths not only in entomology but in plant pathology and in weed science, and the philosophy has become a firm foundation to the science of plant protection. The IPM concept has gained wide general acceptance, however, because of the many-facet aspects, there has been some controversy and/or misunderstanding by the students and practitioners. In this paper, I was tried to review the concepts of IPM and to resolve the contradiction between the philosophy and practical techniques. On this line, the historical background and the concept of economic injury level, which is the foundation of the concepts, are reviewed and discussed the sampling techniques and the population dynamics of single pest, which were basic to the rational and effective application of the management techniques. IPM is not a science per se but it is a technique and it should be applicable to the real conditions. For this purpose, the information on the pests should be transferred to the producers as fast as possible. From such, some of my own opinion is presented in relation to current systems of the pest occurrence forecasting.

• Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.104-116
• /
• 2019

Background: The composition of wild bird populations in temperate zones greatly varies depending on phenological changes rather than other environmental factors. Particularly, wild birds appearing in wetlands fluctuate greatly due to the crossover of species arriving for breeding during the summer and for wintering. Therefore, to understand the changes to species composition related to phenology, we conducted this basic analysis of populations to further the cause of the protection of wetland-dependent wild birds. Methods: It is wrong to simply divide a wild bird population investigation into seasons. This study identifies species composition and indicator species that change along with seasons. Wetlands to be surveyed are protected by natural monuments and wetland inventory and are in a state close to nature. In order to identify as many species as possible in wetlands, a survey was conducted in both shallow and deep wetlands. The water depth varied in these areas, ranging from 0.2 to 2.0 m, allowing for both dabbling and diving ducks to inhabit the area. Surveys were conducted using line-transect and distance sampling methods and were conducted at intervals of 2 weeks. The survey was conducted under the following three categories: the eco-tone and emergent zone, the submergent zone, and the water surface. The survey was conducted along a wetland boundary by observing wild birds. A PC-ord program was used for clustering, and the SAS program was used to analyze the changes in species composition. The data strongly indicates that day length is the main factor for seasonal migration periods, despite the fact that climate change and increasing temperatures are often discussed. Results and conclusions: The indicator species for determining seasons include migrant birds such as Ardea cinerea, Alcedo atthis, Anas penelope, and Poiceps ruficollis, as well as resident birds such as Streptopelia orientalis and Emberiza elegans. Importantly, increases in local individual counts of these species may also serve as indicators. The survey results of seasonal fluctuations in temperate zones shows that spring (April to June), summer (July to September), autumn (October), and winter (November to March) are clearly distinguishable, even though spring and summer seasons tend to overlap, leading to the conclusion that additional research could more clearly identify fluctuation patterns in species composition and abundance in the study area.

• Survey Research
• /
• v.8 no.1
• /
• pp.1-30
• /
• 2007

Several corporations are adopting the 6 Sigma program. Not all corporations are yielding intended results. The inconsistent results may due to the absence of an adequate strategy formulation of 6 Sigma implementation. The 6 Sigma is a qualify control program but its implications are not confined only to qualify improvement. The 6 Sigma program is a change program to bring about changes in organizations. The thesis focuses on developing an installation strategy or model of 6 Sigma program. The utility of the model developed in this research is supported by the empirical evidence. The validity of the model is tested and verified based on the questionnaire survey conducted at 281 business firms. Few research has adopted the empirical survey. The previous researches are mostly centered around identifying success factors. Unlike the present methodology adopted in this research, the past research methodologies are mainly case studies. The distinctive feature of this research does not confine only to the methodology. This research attempted to identify an installation model that would help enterprises get maximum output from the 6 Sigma program. The suggested model is named as Sequential Model(SM). The SM consists of three stages: the preparation stage, the acceptance stage, and the maturity stage. The model is based on the assumption that organizations should follow three stages sequentially to yield the desired output effectively, The preparation stage is further defined including the organizational change factor, the driving system factor, and the promotion factor. The result variable, the organizational performance, is also further defined including the market competitiveness, the employees competitiveness, and the financial performance. The Structural Equation Model was used to test the validity of the Sequential Model(SM). Several alternatives models were developed and compared. The test results consistently show that the suggested model is a valid one and proves its superiority over alternative models. Through this empirical research, we have shown that the strategies of enterprises in line with the proposed model gained better results over others. The research results would be useful information for enterprises that consider formulation of installation strategy of 6 Sigma program.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.29-38
• /
• 2020

It is practically difficult to accurately measure the temperature and concentration of a large combustion systems at industrial sites in real time. Temperature measurement using thermocouple, which are mainly used, is a point-measuring method that is less accurate and less reliable to analyze the wide area range of inner combustion system, and has limitations to internal accessibility. In terms of concentration analysis, most measurement methods use sampling method, which are limited by the difficulty of real-time measurement. As a way to overcome these limitations, laser-based measurement methods have been developed continuously. Laser-based measurement are line-average measurement methods with high representation and precision, which are beneficial for the application of large combustion systems. In this study the temperature and concentration were measured in real time by water vapor and oxygen generated during combustion using Tunable Diode Laser Absorption Spectroscopy (TDLAS). The results showed that the average temperature inside the combustion system was 1330℃ and the mean oxygen concentration was 3.3 %, which showed similar tendency with plant monitoring data.

• Journal of Science Education
• /
• v.39 no.2
• /
• pp.133-150
• /
• 2015

The purpose of this study was to investigate the suitability of elective of the 2009 revised high school science curriculum. This study surveyed 911 students in 126 high schools by using proportionate stratified sampling. Each participating students carried out the on-line survey comprising 13 items about personal and academic suitability. The result of analyzing the response of the questionnaire were as follows. First, there were deviation of study-load, depth, difficulty, etc. between science elective I and II. Second, even though 'science' subject was developed as a subject for improving scientific literacy, it was found that it was considered difficult next to Physics I. Besides, it showed 'science' subject could not function properly to improve the ability to communicate. According to the results of analyzing the degree of interest in science elective, it can not be determined 'no interest in subject' is from the reason of difficulty or large amount of contents to memorize. The results of this study will be useful to provide suggestions for the improvement of next high school science curriculum and textbooks.

• Applied Biological Chemistry
• /
• v.44 no.2
• /
• pp.103-108
• /
• 2001

The objectives of this study were to investigate the contamination of the soils around the major roadsides in Seoul and to accumulate base-line data. Fifty topsoils ($0{\sim}5$ cm) and 48 subsoils ($20{\sim}50$ cm) were collected from 50 sampling sites near Manguro in Chungnanggu. The samples were air-dried, passed through 2-mm sieves, and analyzed to determine the physicochemical properties and the contents of heavy metals (Cd, Cu, Pb, Zn) and anions (Cl, $NO_3$, $SO_4$). Soil textures of top- and subsoils were mainly loamy sand and sandy loam, respectively. Average $_PH$ of top- and subsoil was approximately 7.5, much higher than that of the forest soils in Seoul. Average heavy metal contents were lower than the levels allowed by the Soil Environment Conservation Act of Korea, whereas much higher than those of the forest soils. Contents of some heavy metals were higher than the maximum allowed levels. Anion concentrations were also much higher than those of the forest soils. A careful management to prevent the aggravation of the present contamination level and the diffusion of contaminants is recommended.