• Journal of Distribution Science
• /
• v.16 no.2
• /
• pp.67-81
• /
• 2018

Purpose - Recently the importance of green consumption and corporate social responsibility has been increasing, thereby enhancing the importance of green consumption space as well. The retail space, as a representative consumption space, is now consuming more energy by introducing bigger retail space, 24-hour operation, cutting-edge equipment, and manless checkout system. Especially for retailers, who are constantly interacting with consumers, not only the economic consideration but also the consumer experience via retail service and physical retail space is crucial for their success. Therefore, this study intends to understand the main factors of motivating consumer perception about green retail space. In addition, we further investigate the mediating and moderating variables to encourage revisit intention and green retail space image. Research design, data, and methodology - In order to test our hypotheses with two models, we conducted a survey using questionnaires. In model 1, 356 respondents were surveyed to determine whether consumers' green attitudes and behaviors enhance environmentally friendly perception on retail space properties. In model 2, a questionnaire survey was conducted on 69 consumers who have experience in green retail space. Questionnaire surveys were conducted with on-line panels in Korea and analyzed using regression model and Hayes' PROCESS macro. Results - We found that consumers with green attitude put more importance on the attributes of green retail space. Also, the utility of the green retail space was found to be significant in emotional and social benefits. And, the consumers, who perceived the importance of green retail space, show higher revisit intentions. The emotional and social utilities have significant positive effects on revisit intention through green retail space image. Conclusions - This study demonstrates that a green retail space can induce positive consumer utility, thereby increasing green retail space image and revisit intention. Thus, in order to increase the image and revisit, retailers should communicate green messages with consumers, enhance green attributes of retail space, and target green consumers. To do so, we suggest that various marketing efforts such as publicity and education are needed to appeal experiential green products and retail space to consumers.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.376-380
• /
• 2014

In the present study, oblique L-shaped monopole slot antenna with broadband characteristic is newly proposed. For bandwidth enhancement as well as size reduction, L-shaped slot with two open-terminations on the ground edge is used. The lower part of L-shaped slot comprises oblique form for bandwidth enhancement in low frequency band, whereas its higher part comprise tapered form for its enhancement in high frequency band. The short-circuit terminated microstrip line which is generally known to be more useful for bandwidth enhancement than open-circuit termination is used. The measured impedance bandwidth($S_{11}{\leq}-10dB$) and gain of the fabricated antenna have been observed to be 4.72 GHz (2.28~7 GHz) and more than 3dBi over the passband respectively.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.145-156
• /
• 2004

This study is regarding closed and open forms, which have relatively high recognition among visual perception phenomena in costumes. In particular, this study reviewed closeness and openness of ethnic look, which is a representative open costume. Closed form can be summarized as simple and clear silhouette, conspicuous differentiation from the background, simple construction of the costume and colors with low brightness and clearness. It Is modern, functional, rational and modest. On the other hand, open form can be summarized as complicated and inconspicuous edge line, complicated inner shape and colors with high brightness, high clearness and vividness. It includes concepts of pleasure, entertainment, joy, eroticism, rebel and resistance. Modern costumes have been simplified for a long time and they have functional and closed characteristics in their shape, structure and form. On the other hand, modern open form costumes are usually found in sub-cultural styles such as punk, hippie, kitsch and vintage, and some ethnic looks. Following is a summary of the characteristics of open form shown in the ethnic look. 1. The shape, structure of costumes, hair accessories, lace, ruffle and ornaments are complicated and irregular. 2. The silhouette is inconspicuous because of ambiguity between backgrounds and ABC (Apparel-Body-Construct) or the use of see-through materials. 3. It makes complicated visual shapes because it does not have a single type but is composed of various clothing items together. 4. It gives complex feelings by matching various colors or more than two different fabrics. 5. It looks like the open type because of the complex patterns shown in the costumes.

• Journal of the Korean Society of Costume
• /
• v.62 no.7
• /
• pp.205-219
• /
• 2012

The purpose of this study is to develop comfortable patient gown for spinal surgery patients. The results of the survey confirmed inconveniences and problems with the current gown, and a new gown style was recommended. The recommended changes addressed design, pattern, and materials. The final experimental design for the top of the new patient gown is a wrap style that moves the center opening of the gown to the side and enables patients to control the length of the sleeves by attaching two snaps. The cutting line is aligned with the back brace location, and the issue of repeated bunching of the gown material by the brace was solved by substituting 100% knitted structure fiber. The sleeve length can be adjusted with snaps on the sleeve cap and hem. When lifting up the gown for treatment on specific areas of the body, doctors open the edge of the right side of the gown in order to lift up the top. The bottom of the new patient gown was made from 100% cotton knitted structure fiber, and it enables patients to control the length of pants by attaching two snaps on the side. The results of an on-site dressing suitability evaluation and a flexibility evaluation with respect to dressing/undressing indicated that the new patient gown was much better received than the existing gowns (A and B). Our hypothesis regarding new patient gowns was supported in both the fit and design categories.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.247.1-247.1
• /
• 2014

The capacitive coupled plasma is used widely in the semiconductor industries. Especially, the uniformity of the industrial plasma is heavily related with defect ratio of devices. Therefore, the industries need the capacitive coupled plasma source which can generate the uniform plasma and control the plasma's uniformity. To achieving the uniformity of the large area plasma, we designed multi-powered electrodes. We controlled the uniformity by controlling the power of each electrode. After this work, we started to research another concept of the plasma device. We make the plasma chamber that has multi-ground electrodes imaginary (CST microwave studio) and simulate the electric field. The shape of the multi-ground electrodes is ring type, and it is same as the shape of the multi-power electrodes that we researched before. The diameter of the side electrode's edge is 300mm. We assumed that the plasma uniformity is related with the impedance of ground electrodes. Therefore we simulated the imaginary chamber in three cases. First, we connected L (inductor) and C (capacitor) at the center of multi-ground electrodes. Second, we changed electric conductivity of multi-ground electrode. Third, we changed the insulator's thickness between the center ground electrode and the side ground electrode. The driving frequency is 2, 13.56 and 100 MHz. We switched our multi-powered electrode system to multi-ground electrode system. After switching, we measured the plasma uniformity after installing a variable vacuum capacitor at the ground line. We investigate the effect of ground electrodes' impedance to plasma uniformity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.102-113
• /
• 2014

Present communication and network environment have been moving rapidly toward wireless and mobile base from existing wired internet base. This change of trend influences greatly on business methods accordingly. Therefore many enterprises are trying hard to adopt mobile business in order to gain competitive edge of their products and they are in need of more effective and stable mobile solutions. However, the method of establishing optimal mobile computing environment and how to handle existing business process and use vast amount of database are still needed. Therefore this paper tries to realize a mobile middleware system as a mobile business establishment supporting tool that could link various computational resource on wired internet with wireless LAN, mobile phone network, and mobile devices. To accomplish that specific goal, this paper provides a powerful tool of mobile and wireless application data access that could expand the line of business already set up in general enterprises easily and rapidly into mobile environment. When this suggested solution is applied in the field of industry, it can economically change legacy business process into mobile environment without having to change existing logic and resources at all.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.529-532
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLs) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spiral shapes of identical line width, gap and margin. SFCLs were fabricated from YBCO thin films grown on two-inch diameter $Al_2O_3$ substrates under the same conditions. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, bi-spiral shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.1
• /
• pp.8-20
• /
• 2011

Atmospheric visibility is one of the indicators used to evaluate the status of air quality. Based on a conceptual definition of visibility as the maximum distance at which the outline of the selected target can be recognized, an image analysis technique is introduced here and an algorithm is developed for visibility monitoring. Although there are various measurement techniques, ranging from bulk and precise instruments to naked eye observation techniques, each has their own limitations. In this study, a series of image analysis techniques were introduced and examined for in-situ application. An imaging system was built up using a digital camera and was installed on the study sites in Incheon and Seoul separately. Visual range was also monitored by using a dual technology visibility sensor in Incheon and transmissometer in Seoul simultaneously. The Sobel mask filter was applied to detect the edge lines of objects by extracting the high frequency from the digital image. The root mean square (RMS) index of variation among the pixels in the image was substantially correlated with the visual ranges in Incheon and Seoul with correlations of $R^2$=0.88 and $R^2$=0.71, respectively. The regression line equations between the visual range and the RMS index in Incheon and Seoul were VR=$2.36e^{0.46{\times}(RMS)}$ and VR=$3.18e^{0.15{\times}(RMS)}$, respectively. It was also confirmed that the fine particles ($PM_{2.5}$) have more impacts to the impairment of visibility than coarse particles.

• Explosives and Blasting
• /
• v.25 no.2
• /
• pp.47-60
• /
• 2007

The blast demolition technology has been used to demolish various industrial facilities and tall buildings since 1950s in the advanced countries such as USA and U.K. It is now considered as one of safe demolition methods in the above countries. In Korea, several companies have tried to introduce blast demolition technology in the early days of the 1990s. However, this technology is still at the beginning stage and not fully adopted due to situation of avoiding technology transfer by overseas technical tie-up companies, lack of objects to be demolished and low level recognition on blast demolition. This technology shall be considered as a cutting edge technology to be applicable to demolition of skyscrapers, various industrial structures and factory buildings in the near future. Blast demolition of a pier structure was carried out under the site condition where there were already the constructed 2 pier structures of up and down line which had safety problems in an expressway construction project. The pier structures need to be demolished and reconstructed for a short period of time in consideration of the construction work process to be followed.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.22-32
• /
• 1998

This paper describes a research work of developing a computer-aided design of irregularly shaped-sheet metal product with bending and piercing operation for progressive working. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of five main modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking dimensions and the best utilization ratio of blank-layout within bending production feasibility area which is beyond ${\pm}30^{\circ}$ degrees intersecting angle between grain flow and bending edge line and which is suitable to progressive bending operation. Also the strip-layout drawing generated by a bending and a piercing operation according to punch profiles divided into automatically for external area of irregularly shaped-sheet metal product is displayed in graphic forms.